• Journal of Communications and Networks
• /
• 제12권1호
• /
• pp.30-42
• /
• 2010

In this work we consider the problem of downlink resource allocation for proportional fairness of long term received rates of data users and quality of service for real time sessions in an OFDMA-based wireless system. The base station allocates available power and subchannels to individual users based on long term average received rates, quality of service (QoS) based rate constraints and channel conditions. We formulate and solve a joint bandwidth and power optimization problem, solving which provides a performance improvement with respect to existing resource allocation algorithms. We propose schemes for flat as well as frequency selective fading cases. Numerical evaluation results show that the proposed method provides better QoS to voice and video sessions while providing more and fair rates to data users in comparison with existing schemes.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2494-2504
• /
• 1996

This paper describes about the spread specturm radio wave propagation characteristics in urban microcells. The experiments are carried out with respect to the mean excess delay, the RMS delay spread, and the received maximum peak power in the two kinds of geogrphical areas, LOS area and N-LOS area, especially whose variations are observed while varying the transmission distance and tilting the transmitting antenna. The typical results obtained in pariticular urban sites in Seoul are 300-600 nsec of mean excess delay and about 75 nsec of averaged RMS delay spread for LOS area, and 270-280 nsec of mean excess delay and about 100 nsec for N-LOS area. With the transmitting antenna gilted, obsered in the experiments are increase in RMS delay spread as expected, but increase of the received power at N-LOS areas in particular.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.92-96
• /
• 1998

Ferroelectric Bi-layered oxides SrBi2Ta2O9 (SBT) thin films have been deposited on Pt/Ti/SiO2/Si substrates using multi-target sputtering. Structure, composition, and electrical properties have been investigated on films. The SBT films were deposited with the various bismuth sputtering powers. The SBT films deposited with the bismuth sputtering power of 20 W have the most dense microstructure and the remanent polarization (Pr) of 9.2 ${\mu}$C/cm and the coercive field (Ec) of 43.8 kV/cm at an applied voltage of 5V. The SBT films deposited with the bismuth sputtering power of 20W showed a fatigue-free characteristics up to 1.0${\times}$1010 cycles under 5V bipolar pulse and a leakage current density of 2.0${\times}$10-8 A/$\textrm{cm}^2$ at 200 kV/cm.

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.44-50
• /
• 2018

As a type of bolt with a spherical head, the ball stud is widely used as a part of a ball joint in steering or suspension systems in automobiles. Balls and studs are subjected to heat treatment suitable for each material; in particular, the shear strength of the ball stud must meet the specifications of the production company. This study evaluated the shear strength of joints according to the cooling method of ball studs subject to resistance welding. The shear stress of water cooling was higher than that of air cooling (as-received material). Note, however, th at oil cooling showed lower stress than that of as-received. When judged by standard deviation, mean, and coefficient of variation according to the arithmetic statistics and shape parameter as well as scale parameter, oil cooling is suitable.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.227-233
• /
• 2018

The purpose of satellite navigation meaconing jamming is to make the target GPS receiver calculate false navigation by meaconing the received satellite signals. At this time, since the received and transmitted signals have the same frequency, the back-lobe reduction level of antenna should be -160 dB when the Effective Radiated Power (ERP) is 1 Watt (30 dBm). Therefore, meaconing jamming is impossible by merely reducing the back-lobe level of antenna when the transmitter and receiver are in proximity to each other. In general, the transmitter and receiver are isolated by the time division method to eliminate such transmission/reception interference. This paper studied the optimal switching timing between transmitting and receiving when isolating the time division transmission and reception for GPS meaconing jamming.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2281-2285
• /
• 2009

Powerline communication is the data signal which is modulated by carrier frequency through the installed powerline at in-home or office is transmitted and received signals are separated into data signal with using band-pass filter which cent-frequency is carrier frequency. The home gateway, an equipment which works as an gateway for ubiquitous home network, relays all functions of a home network. The home gateway must always be connected in order to provide seamless services. However it gives unfavorable power consumption. Therefore the needs for working in maximum power saving mode while there is no data traffic and for invoking to the normal function when it is necessary. So, in this paper we survey the development of low power PLC modem monitoring of power consumption and breaking abnormal power in the home Network.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.215-216
• /
• 2008

Ultra wideband (UWB) system is one of the promising solutions for future short-range communication which has recently received a great attention by many researchers. In this paper, we proposed 128-point low power FFT structure based on the memory for UWB systems. The proposed structure can improve implementation area and power consumption efficiency as it consists of one of the butterfly PE and a little memory.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.202-205
• /
• 2003

Recently, UPS(Uninterruptible Power Supply) have been largely used to improve power souse quality as well as to protect critical loads such as computer, industrial system, medical equipment, etc, against power outage by providing clean and uninterrupted power under power supply disturbance or interruptions. But UPS is bulky because used battery. So, UPS size issue have received attention in the power electronics industry. Therefore, this paper proposed a implementation of inside of the computer power supply with UPS by the one-chip microprocessor to minimize UPS size. To verify the proposed power supply, the detail simulation and experiment results indicate that high-frequency switching and operation UPS can be achieved.

• 경영과학
• /
• 제33권1호
• /
• pp.35-47
• /
• 2016

Generation of electricity using wind power has received considerable attention worldwide in recent years mainly due to its minimal environmental impact. However, volatility of wind power production causes additional problems to provide reliable electricity to an electrical grid regarding power system operations, power system planning, and wind farm operations. Those problems require appropriate stochastic models for the electricity generation output of wind power. In this study, we review previous literatures for developing the stochastic model for the wind power generation, and propose a systematic procedure for developing a stochastic model. This procedure shows a way to build an ARIMA model of volatile wind power generation using historical data, and we suggest some important considerations. In addition, we apply this procedure into a case study for a wind farm in the Republic of Korea, Shinan wind farm, and shows that our proposed model is helpful for capturing the volatility of wind power generation.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.11-17
• /
• 2012

가시광 무선 통신 (Visible Light Communication; VLC) 시스템은 조명 장치와 무선 통신의 역할을 동시에 수행하는 특징을 가진다. 하지만 조명 장치로서의 전력 소비와 통신 시스템으로서의 통신 채널 품질이 서로 상충관계에 있어서 가시광 무선 통신 시스템 설계에 문제가 발생한다. 이에 본 논문에서는 다목적 최적화 기법을 이용하여 전력 소비 최소화와 통신 채널 품질 최대화를 위한 최적화 연구를 수행하였다. 이를 위해 전력 소비와 수신 세기 그리고 SNR에 대한 목적함수 설정과 전력 소비 및 통신 채널 품질에 영향을 줄 수 있는 변수들을 범위 구간을 설정한 제약 조건을 제시하였다. 그 결과 전력 소비 최소화와 통신 채널 품질 최대화를 동시에 만족시킬 수 있는 최적화 해를 산출할 수 있었다.