• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.635-640
• /
• 2006

The Snoop in the BS (Base Station) performs a local retransmission over wired-wireless networks to recover packet loss quickly. However, when the MH (Mobile Host) leaves the reception range of the signal, the local retransmission causes performance to degrade. In this paper, we minimize the packet loss and local retransmission caused by the unreachability from BS to MH to improve network performance. To do this, we suggest to add RSS(Received Signal Strengths) flag bit in ACK packet of MH. By using this flag bit, the BS decides whether it retransmits or not to minimize packet loss. The result of the simulation by ns-2 shows a big improvement of performance in the networks.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1151-1154
• /
• 2006

다양한 무선 네트워킹의 출현은 유무선 혼합형태의 네트워크 망으로 변화되면서 기존의 유선 중심의 네트워크 기반으로 구현된 TCP에 많은 문제점을 가져왔다. 높은 비트오류율, 낮은 대역폭 그리고 높은 지연 등은 TCP/IP 통신을 효율적으로 지원하지 못하는 원인이 된다. 또한 BS(Base Station:기지국)에서 보낸 패킷이 MH(Mobile Node : 이동성을 갖는 노드)가 수신범위 밖으로 벗어나면서 손실로 이어질 경우 성능 저하의 원인이 되기도 한다. 본 논문에서는 MN의 ACK에 수신신호 관련 flag bit를 추가하면서 BS에서 추가된 ACK의 flag bit를 이용해서 패킷손실을 최소화하는 기법을 제안한다.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.131-138
• /
• 2007

In wired networks, packet losses mostly occur due to congestion. TCP reacts to the congestion by decreasing its congestion window, thus to reduce network utilization. In wireless networks, however, losses may occur due to the high bit-error rate of the transmission medium or due to fading and mobility. Nevertheless, TCP still reacts to packet losses according to its congestion control scheme, thus to reduce the network utilization unnecessarily. This reduction of network utilization causes the performance of TCP to decrease. In this paper, we predict packet loss by using RSS(Received Signal Strengths) on the wireless and suggest adding RSS flag bit in ACK packet of MH. By using RSS flag bit in ACK, the FH(Fixed Host) decides whether it adopt congestion control scheme or not for the maximum throughput. The result of the simulation by NS-2 shows that the proposed mechanism significantly increases sending amount and receiving amount by 40% at maximum.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1286-1291
• /
• 2017

In this paper, we propose an indoor positioning system that makes use of the attenuation model for IEEE 802.11 Channel State Information (CSI) in order to determine its distance from an Access Point (AP) at a fixed position. With the use of CSI, we can mitigate the problems present in the use of Received Signal Strength Indicator (RSSI) data and increase the accuracy of the estimated mobile device's location. For the experiments we performed, we made use of the Intel 5300 Series Network Interface Card (NIC) in order to receive the channel frequency response. The Intel 5300 NIC differs from its counterparts in that it can obtain not only the RSSI but also the CSI between an access point and a mobile device. We can obtain the signal strengths and phases from subcarriers of a system which in turn means making use of this data in the estimation of a mobile device's position.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.676-682
• /
• 2011

Sybil attack can disrupt proper operations of wireless sensor network by forging its sensor node to multiple identities. To protect the sensor network from such an attack, a number of countermeasure methods based on RSSI (Received Signal Strength Indicator) and LQI (Link Quality Indicator) have been proposed. However, previous works on the Sybil attack detection do not consider the fact that Sybil nodes can change their RSSI and LQI strength for their malicious purposes. In this paper, we present a Sybil attack detection method based on a transmission power range. Our proposed method initially measures range of RSSI and LQI from sensor nodes, and then set the minimum, maximum and average RSSI and LQI strength value. After initialization, monitoring nodes request that each sensor node transmits data with different transmission power strengths. If the value measured by monitoring node is out of the range in transmission power strengths, the node is considered as a malicious node.

• Tunnel and Underground Space
• /
• v.34 no.4
• /
• pp.267-282
• /
• 2024

This study aims to develop a wireless communication system for long-term monitoring of high-level radioactive waste disposal facilities. Conventional wired sensors can lead to a deterioration in buffer quality and management difficulties due to the use of cables for power supply and data transmission. This study proposes the adoption of a wireless communication system and compares the received signal strengths within bentonite using modules such as WiFi, ZigBee, and LoRa. Increases in dry density of bentonite and distance between transceivers led to reduced received signal strength. Additionally, using the low-frequency band exhibited less signal attenuation. Based on these findings, a conceptual design for a wireless network-based THM integrated sensor system was proposed. Results of this study can be used as foundational data for long-term monitoring of disposal facility.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.128-133
• /
• 2020

In this study, an 1-dimensional positioning method using iterative linear regression for path loss expression is proposed. In the proposed method, received signal strengths (RSS) measured in several locations and distances between the measuring locat ions obtained by dead reckoning are used to derive a linear regression for the path loss from the transmitting beacon. In the proposed method, for the distance between the transmitting beacon and a target measuring location, several tentative values are assumed. For each tentative value, a linear regression is obtained. Among the linear regression expressions, the one closest to the known reference RSS value is selected and used to derive the distance to the target location. Test results show that the proposed method is more accurate than path loss model.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.436-442
• /
• 2015

In this paper, we develop an indoor localization device which embeds localization information into indoor light-emitting-diodes (LED) lighting systems. The key idea of our device is the use of the newly proposed "bit stuffing method". Through the use of stuff bits, our device is able to measure signal strengths even in transient states, which prohibits interference between lighting signals. The stuff bits also scatter the parts of the signal where the LED is turned on, thus provides quality indoor lighting. Additionally, for the indoor localization system based on RSSI and TDM to be practical, we propose methods for the control of LED lamps and compensation of received signals. The effectiveness of the proposed scheme is validated through experiments with a low-cost implementation including an indoor navigation task.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1450-1456
• /
• 2015

The received signal strengths according to the propagation distance between a transmitting shore station with a 53 m antenna hight and a receiving ship station with about 6m antenna hight from 700 m upto about 20 km are measured at ship's moving velocity of $5{\pm}1m/s$ using a single carrier signal at 150.0625MHz. In this paper, the path loss exponents at the propagation distance from 700 m to 20km are estimated via minimum-mean-square-error method using the measurements of the received signal strength, and the mean of the estimated path loss exponent become 3.79. The estimated propagation path loss exponents is similar to that calculated based on the field-strength values from 2 km to 20 km in Annex 2 of ITU-R P.1546-4, which is measuring results at maritime VHF at 100 MHz carrier frequency. Therefore, the estimated propagation path loss exponent shall be used as the expected path loss exponents for summer in costal area of South Sea of Korea.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.69-76
• /
• 2017

Bluetooth Low Energy (BLE), also known as Bluetooth Smart, has ultra-low power consumption; in fact, BLE-enabled devices can run on a single coin cell battery for several years. In addition, BLE can estimate the approximate distance between two devices using the Received Signal Strength Indication (RSSI) feature, enabling relatively precise navigation in indoor and small outdoor areas where GPS is not an option. In this paper, an experimental setup is presented in which BLE is used for navigation within a small outdoor area. BLE-based beacons are installed in fixed positions, which periodically transmit a universally unique identifier (UUID). A smart device receives the UUID and sends it to a database server using cellular or Wi-Fi technology. The server returns fixed position information corresponding to the received UUID codes, and the smart device uses that information to compute its current position based on relative signal strengths, and display it on a map. These results demonstrate the successful application of BLE technology for navigation in small outdoor areas. This system can be implemented for indoor navigation as well.