• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.74-82
• /
• 2011

This paper describes a control system for positioning the real-time locations of the autonomous warfare vehicles and infantry, and for avoiding collisions between them. The control system utilizes the low-cost RSSI (Received Signal Strength Indication) for positioning the locations of the wireless devices. The mathematical mean filtering processes are applied to the calculation of the RSS matrix to improve the performance for positioning the wireless devices in the multi-path propagation environment. A fuzzy rule is proposed to recover and replace the broken packets occurring in the wireless communication. The gradient and geometric triangulation algorithms are proposed to trace the real-time locations of wireless devices, based on the distances between them. The estimated location results of the geometric triangulation algorithm are compared with the results of the GPS and the gradient algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.515-518
• /
• 2011

Recently we all agree with the fact that conference is the most important communication method in industrial fields. With improvement of information technology, the conference using computer-aided system has been increased. Therefore, software, which can support the conference, is highly needed. In our work, we implemented the display sharing system in WLANs that sends the presenter's display to all audience in real-time manner. In order to share the display, we used multicast transmission which shows good performance in one to many communications. And also, to solve the data error and loss problem, which are weak points of multicast transmission, we used Reed-Solomon coding scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1697-1703
• /
• 2014

In this paper, we propose an indoor RSSI (received signal strength indication)-based localization method that uses virtually overlapped visible light with an indoor LED lighting system. In our system, a photodiode (PD) measures the RSSI from LED lamps that blink in one row or column units. Subsequently, the RSSI is used to obtain the horizontal distances between the LED lamps and the receiver with the predetermined characteristics curve, R-D curve, that represents the relation between the RSSI and the horizontal distances. When the controlled LED lamps blink in one row or column units, the R-D curve at the border of the LED lamps is different because of the weak lighting, which results in the position sensing error of the receiver. The deviation of the optical power of each LED also causes the error. To solve these problems, we propose a method that overlaps the visible light through the numerical operation at the receiver side without any modification of the light source side. Our proposed method has been simulated in a room measuring $1.2{\times}1.2{\times}1.8m^3$ considering the effect of the error on the optical power of the LED. The simulation result shows that the proposed method eliminates the error condition with the R-D curve and achieves an average positioning error of 13.4 mm under the error rate 3% of the optical power.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.74-79
• /
• 2015

In this paper, in order to improve the error is utilized to location tracking the smart sensor detects a walking information user, RSSI is to provide an indoor position tracking system that is capable of correcting an error in terms weak. The acceleration sensor is able to detect the activity in the user walking and detects the number of step and the moving distance using the same. The Direction sensor is utilized as a digital compass, to detect the moving direction of the user. As a result of detecting the walking information using the sensor, it can be showed that this proposed indoor positioning system has a high degree of accuracy for the number of steps and the movement direction. Therefore, this paper shows that the proposed technique can correct the error of the location information to be problem in the conventional indoor location system which uses the only Wi-Fi APs by estimating the user's movement direction and distance using the sensors in smartphone without an additional equipment and cost.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2014

In this paper, we propose a novel UE(User Equipment) position tracking algorithm of visible light signals, and analyze BER performance when optical beamforming scheme is applied in VLC(Visible Light Communications) system. The optical beamforming scheme as an interference mitigation method provides good optical channel conditions between UE(Rx) and LED light(Tx), and lead to better BER performance because UE is able to get a better RSSI(Received Signal strength indication) value. For the system BER, the proposed UE position tracking method for optical beamforming transmission demonstrates the performance enhancement compared to a system not applied the optical beamforming transmission scheme, and up to about 5~6dB SNR performance gain is achieved. The results of the paper can be applied to design of various VLC and LBS applications for ubiquitous home network systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1073-1080
• /
• 2023

The development and speed improvement of the Internet network, and the development of many platforms based on it, have brought about a rapid expansion of production and consumption of various contents. However, the existing IP-based Internet system cannot efficiently cope with such an urgent increase in data. Accordingly, an alternative called the CCN(Contents Centric Network) has emerged, enabling more efficient data transmission and reception centered on content rather than host. In this paper, we will deal with the mobility of intermediate nodes in CCN real-time streaming service, which is one of the major research fields of CCN, and minimize network overload through more efficient path switching through RSSI detection. In other words, by improving the method of selecting and switching a spare path when an intermediate node located between the requester(consumer) and the provider moves, a mechanism for managing data transmission is not interrupted and unnecessary load due to route switching does not occur in the network.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.4
• /
• pp.35-42
• /
• 2011

Link quality assessment is a crucial part of sensor network formation to stably operate large-scale wireless sensor networks (WSNs). A stability of path consisting of several nodes strongly depends on all link quality between pair of consecutive nodes. Thus it is very important to assess the link quality on the stage of building a routing path. In this paper, we present a link quality assessment method, Hybrid Link Quality Metric (HQLM), which uses both of LQI and RSSI from RF chip of sensor nodes to minimize set-up time and energy consumption for network formation. The HQLM not only reduces the time and energy consumption, but also provides complementary cooperation of LQI and RSSI. In order to evaluate the validity and efficiency of the proposed method, we measure PDR (Packet Delivery Rate) by exchanging multiple messages and then, compare PDR to the result of HQLM for evaluation. From the research being carried out, we can conclude that the HQLM performs better than either LQI- or RSSI-based metric in terms of recall, precision, and matching on link quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.239-241
• /
• 2011

Recently, studies on the indoor positioning system in application of wireless AP have been actively going on. The indoor wireless positioning system can be classified into several types according to the positioning techniques. Among them, the fingerprint technique is a technique that establishes the radio map by collecting MAC information of AP and RSSI (Received Signal Strength Indication) before executing positioning and then determines the position in comparison with the information of AP collected during the course of positioning. In the traditional fingerprint techniques, they control and manage by installing APs that are utilized for positioning. However, in case of specific indoors, the management can be done by installing a small number of APs but, in case of wide outdoors, it's practically impossible to install and manage equipments for positioning. In order to solve such problem, there is an improved fingerprint technique that utilizes the APs that are already scattered around. This technique will allow positioning without additional cost, but even the improved fingerprint positioning technique may incur dropped accuracy as well due to wide fluctuation of the AP information. In this paper, the traditional fingerprint technique and the improved fingerprint technique are explained in comparison, and we will compares difference in performance with the proposed WPS_WS (Wi-Fi Positioning System_Weak Signal) technique.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1310-1316
• /
• 2014

The IMO has recommended on VHF digital communications operation for sailing ships from 2017. And ships more than 5 tons is obliged to digital communications by fishing Vessels Act and Vessel Safety Act in domestic. The owner of all vessel is equipped to the automatic position reporting device in accordance with the Notice of the Ministry of Oceans and Fisheries to regulations, It shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on all vessels. The info-communications station of fishery is operating the automatic position reporting system using the VHF DSC in east sea from 2012, Continuously, which is underway the install plan in south sea and yellow sea. But this plan is very difficult, because of propagation environment is poor on account of complicated coastline and many islands. This paper has analyzed the propagation coverage for position setting of coast station in south sea and the traffic zone set up by compare with RSSI and methode of navigation tracking by VMS.