• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.15-26
• /
• 2007

L. A. 마모율 시험은 건설용 골재의 강도를 확인하기 위한 방법으로 주로 석산의 모암을 대상으로 시행하여 왔다. 본 연구는 경상분지 퇴적암이 집중 분포되어 있는 25 지점에서 지질학적 특성을 대표할 수 있는 324 브록의 시료를 채취하여 L. A. 마모율시험으로 각종 공학지수(일축 압축강도, 압열 인장강도, 탄성계수, 점하중 강도지수, Schmidt 해머 반발지수)를 추정하기 위한 실험을 시행하여 회귀 분석법으로 서로간의 상관성을 확인한 결과, 상호간 좋은 상관관계가 있음을 확인하였다. 이 방법이 다른 공학지수를 추정함에 손색이 없으므로 이후에도 많은 활용이 있기를 기대한다.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.63-70
• /
• 2004

The objective of this study is to evaluate the compressive strength of recycled aggregate concrete by the non-destructive testing. Main experimental variables were the replacement level of recycled aggregate and blast-furnace slag, which were divided into two series according to recycled aggregate maximum size. Test results showed that a recycled aggregate had a significant influence on the non-destructive testing results, such as rebound number, Ultrasonic pulse velocity, and frequency. A prediction model of compressive strength considering the replacement level of recycled aggregate was suggested by multi-regression analysis and was compared with test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.609-617
• /
• 2003

The use of Shotcrete(Sprayed concrete) for the support of underground excavations was pioneered by the Civil engineering industry. Permanent shotcrete tunnel linings such as Single-shell, NMT(Norwegian Method of Tunnelling) have been constructed in many countries for reducing construction time and lowering construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of Permanent Shotcrete Linings, high performance shotcrete having high strength, high durability, better pumpability has to be developed in advance. This paper presents the ideas and the first field test results of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) with powder types cement mineral accelerator. From the results, wet-mix SFRS with powdered accelerator exhibited good early strength improvement and less rebound ratio compared to the ordinary accelerator.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1536-1539
• /
• 2009

In this paper, The Ready-mixed Shotcrete which Factory with automatic production system is made Materials using synthetic fiber is evaluated the field application. Result of whole test, synthetic fiber(PP, PVA) is indicated almost equal result of steel fiber by rebound rate, compressive strength and bending test. especially, PP fiber(40mm, 12kg) is showed that bending strength and toughness is better than steel fiber, also I reason in that field application of synthetic fiber(PP, PVA) is proved.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.95-102
• /
• 2019

Non-destructive methods such as rebound hardness method and ultrasonic method are widely studied for evaluating the physical properties, condition and damage of concrete, but are not suitable for detecting delamination and cracks near the surface due to various constraints of the site as well as the accuracy. Therefore, in this study, the impact resonance method was applied to detect the separation cracks occurring near the surface of the concrete slab and bridge deck. As a next step, the principal component analysis were performed by extracting various features using the FFT data. As a result of principal component analysis, it was analyzed that the reliability was high in distinguishing defects in concrete. This feature extraction and application of principal component analysis can be used as basic data for future use of machine learning technique for the better accuracy.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.229-235
• /
• 2016

현장에서는 콘크리트 공사시 거푸집 탈형작업을 위한 다양한 기술들이 활용되고 있다. 그중에서 콘크리트의 압축강도추정을 위한 비파괴 시험방법에는 다양한 방법들이 제시되고 있지만, 일반적으로 타격법(반발경도법이라 칭함)과 비타격법(초음파법이라 칭함)을 활용한 시험방법이 주로 활용된다. 비파괴시험에 의한 압축강도의 추정은 경험 값에 의한 방정식에 의하여 계산할 수 있으며 다양한 식들이 제시되고 있으나, 초기재령에서 조기강도가 발현되는 콘크리트에 대한 데이터는 적은 편으로 기존의 강도추정식에 의한 압축강도의 계산에는 한계점이 있을 수 있다. 본 연구에서는 현장에서 주로 활용되는 조기탈형용 콘크리트의 배합을 활용하여 소형 공시체 및 Mock-up 시험체의 파괴 및 비파괴검사를 수행하였으며, 기존 비파괴검사 추정식을 통한 강도 결과 값을 분석하였다. 실험결과, 기존 연구의 비파괴시험에 의한 제안식을 활용한 압축강도 추정값은 파괴시험방법에 비하여 하회하는 경향으로 70% 이하의 값을 나타냈으며, 초음파속도에 의한 신뢰성은 강도가 높아질수록 낮아지는 것으로 확인되었다. 본 연구의 범위에서 조기강도 발현 콘크리트의 강도추정에 있어 기존식의 활용의 한계점이 있을 것으로 분석되어, 24~60MPa의 콘크리트를 대상으로 반발경도법 및 초음파속도법에 의한 추정식을 제안하였다.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.59-67
• /
• 2017

본 연구에서는 5~13mm 순환골재를 치환한 콘크리트의 현장 적용성을 평가하기 위하여 목업 시험체를 제작하여 콘크리트를 타설한 후 이들이 콘크리트의 제반특성에 미치는 영향을 실험적으로 고찰하고자 하였다. 기둥 및 벽체를 모사한 $1200{\times}800{\times}800mm$ 목업 시험체를 호칭강도 및 5~13mm 순환골재 치환율별로 7개 제작하였고, 24, 27 및 40MPa 급 호칭강도의 콘크리트에 5~13mm 순환골재 30%와 70%(24MPa만 해당)를 치환한 배합과 무치환배합을 선정하여 제조하였다. 실험항목으로 굳지않은 상태에서 슬럼프, 슬럼프플로, 블리딩을 측정하였고, 경화상태에서는 압축강도, 반발도, 코어강도 및 건조수축 길이변화율을 측정하였다. 연구결과 5~13mm 순환골재가 30% 치환된 경우 슬럼프, 슬럼프플로, 블리딩량은 플레인에 비해 향상되는 것으로 나타났고, 압축강도의 경우도 최밀 충전 효과에 기인하여 플레인보다 상승되는 것으로 나타났다. 목업 시험체의 높이별 반발도의 경우도 5~13mm 순환골재가 30%치환된 경우 상하간의 반발도차이가 감소되는 것을 알 수 있었다.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.359-371
• /
• 1994

A drop weight type impact test system is designed and set up to experimentally investigate impact responses of composite laminates subjected to the low-velocity impact. Using the test system, the impact velocity and the rebound velocity of the impactor as well as the impact force history are measured. An error of the measured data due to a difference in measuring position of the sensor is corrected and, for the estimation of real contact force history, a method of correcting an error due to friction forces is developed. Experimental methods to fix the boundary edgy of laminate specimens in impact testing are investigated and the impact tests on the specimens fixed by those methods are performed. Impact force histories and dynamic strains measured from the tests are compared with numerical results from the finite element analysis using the contact law. Consequently, the nonlinear numerical results considering the large deflection effects are agreed with the experimental results better than the linear ones.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1511-1516
• /
• 2009

In recent years, the large-scale shaft have been appling in domestic mine for mass production using a large machine, the safety of mine also have been increasing. And the new trial that shotcrete of tunnel field was apply to mine support was progressed. But, the conditions of domestic mine was different from that of tunnel, so, the batch plant of tunnel could not be installed in mine field because of low economical efficiency and difficulty for selection of site. Ready-mixed Shotcrete that mixed with high quality materials and could be controled shotcrete quality is producted in plants and transported to field, so do not need to batch plant. In this study, The Field test of the Ready-mixed Shotcrete was performed in the large-scale mine and was compared with the quality of Field mix shotcrete. As the result of the Field test, compressive strength and rebound of Ready-mixed Shotcrete were superior to these of Field mix shotcrete.

• 열처리공학회지
• /
• 제3권2호
• /
• pp.32-36
• /
• 1990

For the accurate measurements of hardness in a material, it is necessary to have a thorough understanding of the effects of test variables on the accuracy of hardness value. For the rebound hardness test, major test variables are the radius of hammer ball tip, type of backing materials, size and roughness of the specimen. In this study, effects of these variables on Equo-Tip hardness value were investigated. Hardness measurements were carried out using WC balls with various sizes of worn-ot zone. The sample materials chosen for the experiments were commercial standard hardness blocks and SM45C steel bars subjected to either normalization or quench and temper treatments. As backing materials, aluminum, steel and rubber plates were used in all the experiments. Experimental results show that for the accurate measurements of Equo-tip hardness, it is necessary to use the hammer ball with a worn-out zone parameter of less than 0.23, and the recommended minimum thickness and width of the specimen are 25mm and 70mm, respectively. Further for the surface preparation, the specimens need to be polished with an emery paper of No. 400 or finer, and for the backing matrials, it is recommended to use steels or rubbers.