• 제목/요약/키워드: Reattachment

검색결과 309건 처리시간 0.034초

변형된 치관부 파절편 재부착술식을 이용한 치관치근파절의 치료 (Treatment of crown-root fracture with a modified crown fragment reattachment technique)

  • 송창원;송민주;신수정;박정원
    • Restorative Dentistry and Endodontics
    • /
    • 제35권5호
    • /
    • pp.395-400
    • /
    • 2010
  • 치관부 파절편 재부착술식은 접착치의학의 발달과 더불어 치관파절 치료 방법 중 하나로 자리매김하였다. 하지만 치관치근파절된 치아에 있어서 기존의 치관부 파절편 재부착술식으로는 치은연하 영역의 수복 및 생물학적 폭경의 유지가 어려워 부가적인 치관연장술 또는 치아 정출술 등이 요구되게 된다. 하지만 이번 증례보고는 치수노출을 동반한 치관-치근파절을 치료함에 있어서 이러한 부가적인 술식 없이 변형된 치관부 파절편 재부착술식만을 이용하여 처치한 사례이다. 환자는 근관치료 후 post 삽입 및 재부착 술식을 시행 받았으며 이때 치관 파절편의 변형을 통해 생물학적 폭경을 위한 공간 유지 및 적절한 접착을 위한 영역을 확보할 수 있었고 이후 한차례의 재파절이 발생하였지만 재차 재부착 후 2년간의 follow up을 통해 치주부착상실 없이 치관 파절편이 잘 유지되는 것이 관찰되었다.

소아 및 청소년의 영구치 치관 파절시 파절편 재부착술의 추적 관찰 (Long-Term Outcome of Reattached Tooth Fragment in Permanent Anterior Teeth of Children and Adolescents)

  • 강호연;채용권;이고은;이효설;최성철;남옥형
    • 대한소아치과학회지
    • /
    • 제48권1호
    • /
    • pp.42-49
    • /
    • 2021
  • 이 연구의 목적은 소아 및 청소년의 영구치 치관 파절시 파절편 재부착술의 추적 관찰 결과를 평가하고자 함에 있다. 21명의 27개의 영구치 파절편 재부착술을 시행한 환자를 대상으로 임상 사진, 방사선 사진 및 의무기록을 활용하여 평가하였다. 파절편 탈락은 총 17개 치아에서 관찰되었으며 반복적인 외상이 가장 빈번한 실패 원인이었다. 파절편 재부착술과 치수치료 시행 유무는 통계적으로 유의미하지 않았다(p > 0.05). 평균 파절편 비율은 0.482 ± 0.147이며 성공률은 파절편 비율과 유의미한 상관관계를 나타냈다(p = 0.018). 평균 파절편 유지 기간은 72개월이며 파절편 유지 기간과 파절편의 비율은 통계적으로 유의미한 상관관계를 나타냈다(p = 0.003). 소아 및 청소년의 영구치 치관 파절시 파절편 비율이 50% 미만인 환자에서 파절편 재부착술은 예측 가능한 치료 방법이 될 수 있다고 판단된다.

다양한 $k-{\varepsilon}$ 난류모델과 Skew-Upwind 기법에 의한 단이 진 벽면분류에 대한 수치해석 (Numerical Analyses on Wall-Attaching Offset Jet with Various Turbulent $k-{\varepsilon}$ Models and Skew-Upwind Scheme)

  • 서호택;부정숙
    • 대한기계학회논문집B
    • /
    • 제24권2호
    • /
    • pp.224-232
    • /
    • 2000
  • Four turbulent $k-{\varepsilon}$ models (i.e., standard model, modified models with streamline curvature modification and/or preferential dissipation modification) are applied in order to analyze the turbulent flow of wall-attaching offset jet. For numerical convergence, this paper develops a method of slowly increasing the convective effect induced by skew-velocity in skew-upwind scheme (hereafter called Partial Skewupwind Scheme). Even though the method was simple, it was efficient in view of convergent speed, computer memory storage, programming, etc. The numerical results of all models show good prediction in first order calculations (i.e., reattachment length, mean velocity, pressure), while they show some deviations in ·second order (i.e., kinetic energy and its dissipation rate). Like the previous results obtained by upwind scheme, the streamline curvature modification results in better prediction, while the preferential dissipation modification does not.

박리전단층이 축대칭 하향단흐름에 미치는 영향 (Effect Of The Separating Shear Layer on the Flow Over an Axisymmetric Backward-Facing Step)

  • 부정숙;김경천;양종필
    • 대한기계학회논문집
    • /
    • 제19권4호
    • /
    • pp.1102-1115
    • /
    • 1995
  • An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purpose of the present study is to investigate the effect of the boundary layer thickness at the separation point on the reattachment length and to understand the structure of the recirculating flows. Local mean and fluctuating velocity components were measured in the separating and reattaching axisymmetric turbulent boundary layer over the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. The study demonstrated that the reattachment length increases with increasing boundary layer thickness. It was also observed that the reverse flow velocity and turbulent kinetic energy decrease with an increase in the momentum thickness at the separation point. The measured velocity field suggests that the boundary layer thickness at the separation can affect definitely on the formation of corner eddy.

후방 계단 주위의 난류 유동 수치 해석 (Numerical Computation of Turbulent Flow over a Backward Facing Step)

  • ;반석호;김형태
    • 한국해양공학회지
    • /
    • 제10권3호
    • /
    • pp.44-49
    • /
    • 1996
  • 후방계단(backward facting step) 주위의 난류 유동 특성을 수치 해석을 통해 파악하고자 하였다. 지배방정식은 2차 정도의 유한 차분 기법으로 이산화하였으며 비교차격자계를 사용하여 양해법으로 계산하였다. 난류 모형으로는 이층 모형(two-layer)을 사용하였고 압력 Poisson 방정식을 이용하여 압력과 속도를 연성 시켰다. Re=44,000인 경우에 대해 계산 결과로 부터 후방 계단 뒤의 속도 벡터, 유선, 압력 및 속도 분포, 재부착 길이(reattachment length)등의 실험치와 비교하였다. 본 계산에 사용한 수치 해석 기법은 박리등이 포함된 복잡한 난류 유동 현상을 잘 재현할 수 있음을 확인할 수 있었다.

  • PDF

수직벽 전방에서의 흡입/토출을 이용한 후류제어 연구 (Study of Wake Control by Blowing and Suction in Front of the Vertical Fence)

  • 최영호;김형범
    • 대한기계학회논문집B
    • /
    • 제32권1호
    • /
    • pp.47-53
    • /
    • 2008
  • The effect of periodic blowing and suction of upstream flow on the separated shear flow behind the vertical fence was experimentally investigated. The fence was submerged in the turbulent shear flow and DPIV method was used to measure the instantaneous velocity fields around the fence. Periodic blowing and suction flow was precisely generated by the syringe pump. Spanwise nozzle made 2D planar periodic jet flow in front of the fence and the effect of frequency and maximum jet velocity was studied. From the results, the reattachment length can be reduced by 60% of uncontrolled fence case under the control.

쉴리렌 간섭계에 의한 사각덕트내 후향계단후 유동에서의 혼합대류 전열에 관한 연구 (A Study on Mixed Convection Heat Transfer in Duct Flow behind a Backward-Facing Step by Using Schlieren Interferometer)

  • 백병준;박복춘;김진택
    • 설비공학논문집
    • /
    • 제6권1호
    • /
    • pp.1-10
    • /
    • 1994
  • The flow and heat transfer characteristics behind a backward facing step located in a vertical channel has been studied. In this study, the numerical prediction has been performed by solving the Navier-Stokes equation and energy equation simultaneously with the SIMPLE algorithm embedied in TEACH code. Local heat flux was measured by using Schlieren Interferometer. The flow visualization was performed using the cylindrical lens and the laser beam that is scattered by the supplied glycerine particles. The velocity and temperature distributions, recirculation region, reattachment length, and local heat flux are obtained under the various parameters to investigate the buoyancy effect on the flow and heat transfer characteristics behind the step.

  • PDF

사각관로의 축대칭 공동부에서의 열전달 (Heat Transfer in an Axisymmetric Cavity of a Rectangular Tube)

  • 박용일
    • 태양에너지
    • /
    • 제10권1호
    • /
    • pp.31-37
    • /
    • 1990
  • 사각관로의 축대칭 공동부내의 흐름에 대하이 실험적으로 연구를 하였다. 공동부의 측벽과 대향벽에서 압력과 전달계수를 측정하였다. 공동부의 길이는 80mm에서 ${\infty}$로 변화시켰을때 재부착점을 지나서 공동부의 길이를 증가시킨 경우 열전달계수는 감소하였고, 재부착점 근방에서 평균 열전달계수가 최대치가 됨을 얻었다.

  • PDF

표면유동가시화를 통한 박리유동의 고찰 (On Flow Separation Delineated with Surface Flow Visualization)

  • 전중환
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1998년도 추계 학술대회논문집
    • /
    • pp.1-6
    • /
    • 1998
  • From surface flow visualization on a MIRA notchback reference model using oil flow technique, the topology of the singular points of the skin friction lines are delineated. Separation and reattachment lines at the front screen, at the A-pillar, at the C-pillar and on the rear side of the car including the trunk have been identified. It is worth to mention that two vortices emerging from the top of the trunk coil in the opposite direction as that vortices starting from the C-pillar edge. The positions of the singular points and the separation and reattachment lines and the foci of the vortices provide a sensitive database for validation of CFD-codes

  • PDF

CFD에 의한 2차원 후향계단에서의 재부착 유동특성에 관한 연구 (A Study on Flow Characteristics of Two-Dimensional Backward-Facing Step by CFD)

  • 최영도;이영호
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1998년도 추계 학술대회논문집
    • /
    • pp.127-132
    • /
    • 1998
  • The present study is aimed to investigate flow characteristics of Two dimensional backward-facing step by numerical approach. A convection conservative difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar, transitional and turbulent flow conditions at which the experimental data can be available for the backward-facing step. The twenty kinds of Reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement, computations are performed on seven different meshes of uniformly increasing refinement. Also to investigate the result of inflow dependence, two kinds of the inflow profile are chosen for the laminar flow. As criterion of benchmarking the result of numerical simulation, reattachment length is used for the selected Reynolds numbers.

  • PDF