• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.175-181
• /
• 2006

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity. The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.

• 한국지구과학회지
• /
• 제40권5호
• /
• pp.487-501
• /
• 2019

In this study, steric height variability in the East Asian Seas (EAS) has been analyzed by using ocean reanalysis intercomparison project (ORA-IP) data. Results show that there are significant correlations between ocean reanalysis and satellite data except the phase of annual cycle and interannual signals of the Yellow Sea. Reanalysis ensemble derived from 15-different assimilation systems depicts higher correlation (0.706) than objective analysis ensemble (0.296) in the EAS. This correlation coefficient is also much higher than that of the global ocean (0.441). For the long-term variability of the thermosteric sea level during 1993-2010, a significant warming trend is found in the East/Japan Sea, while cooling trend is shown around the Kuroshio extension area. For the halosteric sea level, a dominant freshening trend is found in the EAS. However, below 300 m depth around this area, the signal-to-noise ratio of the linear trend is generally less than one, which is related to the low density of observation data.

• 한국태양에너지학회 논문집
• /
• 제37권2호
• /
• pp.1-11
• /
• 2017

The investigation on reliability of ERA-Interim reanalysis wind data was conducted using wind data from the five met masts measured at inland and coastal areas, Jeju island. Shinchang, Handong, Udo, Susan and Cheongsoo sites were chosen for the met mast location. ERA-Interim reanalysis data at onshore and offshore twenty points over Jeju Island were analyzed for creating Wind Statistics using WindPRO software. Reliability of ERA-Interim reanalysis wind data was assessed by comparing the statistics from the met mast wind data with those predicted at the interest point using the Wind Statistics. The relative errors were calculated for annual average wind speed and annual energy production. In addition, the trend of the error was analyzed with distance from met mast. As a result, ERA-Interim reanalysis wind data was more suitable for offshore wind resource assessment than onshore.

• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.505-513
• /
• 2001

본 연구에서는 지진하중을 받는 철근콘크리트(Reinforced Concrete : RC) 교각의 효율적인 최적설계 알고리즘을 제안하였다. 제안한 RC 교각 최적설계 알고리즘은 효율적인 강도재해석 기법을 기초로 하고 있다. 또한 RC 교각의 특성을 고려하여 제약조건 소거기법과 같은 근사화 기법을 도입 하였다. 기존의 최적설계 방법 비교를 통해 제안한 RC 교각의 최적설계 방법의 효율성과 신뢰성을 비교하였다. 그리고 시방서의 내진 규정에 따른 수치예제를 통하여 제안한 강도재해석기법에 의한 새로운 알고리즘이 기존의 최적설계 방법에 비해 효율성과 신뢰도가 우수하다는 것을 입증하였다.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.459-467
• /
• 2004

본 연구에서는 부분적 강성 변경이 연속적으로 필요한 경우, 전체 구조물을 재해석하지 않고도 관심을 두고 있는 변위와 부재력을 실시간 응답 수준에서 재계산할 수 있는 "적응형 부구조물화를 이용한 부분 재해석 알고리즘"을 제안한다. PRAS 알고리즘의 핵심 개념은, 1) 대상 구조물을 강성변경부분과 강성고정부분으로 구분하고, 2) 강성고정부분을 강성변경부재들이 연결된 잔류자유도만을 갖는 부구조물로 응축한 후, 3) 강성변경부재들과 강성고정부분 부구조물의 결합으로 전체 구조물을 모델랑함으로써, 최종 평형방정식의 잔류자유도수를 줄이는 데에 있다. 이 때 강성고정부분의 부구조물화 과정에서 본 연구에서 제시하는 또 하나의 알고리즘인 "적응형 부구조물화 알고리즘"을 적용하여 일단 초기 해석이 완료된 후에는 잔류자유도 구성이 달라질 때 다시 부구조물화에 소요되는 계산량을 최소화하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.363-370
• /
• 2004

This Paper presents the response force distribution factor(RDF) and its application to recalculation of member forces in case of partial changes of structures. Using RDF, the mutuality of response forces between members can be estimated. The reanalysis technique recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity using RDF. It is expected that RDF and the reanalysis technique can be used to develop efficient analysis techniques for tall buildings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.205-210
• /
• 2000

An optimum design algorithm of PSC box girder bridges using design sensitivity analysis is proposed in this paper. For the efficiency of the proposed algorithm, approximated reanalysis techniques using design sensitivity analysis are introduced. And also to save the numerical efforts, an efficient reanalysis technique through approximated structural responses is proposed. A design sensitivity analysis of structural response is executed by automatic differentiation(AD). The efficiency and robustness of the proposed algorithm, compared with conventional algorithm, is successfully demonstrated in the numerical example.

• Journal of the Korean Statistical Society
• /
• 제25권3호
• /
• pp.369-379
• /
• 1996

A study is made of approximate technique for structural reanalysis based on the force method. Perturbntion analysis of generalized least squares problem is adopted to reanalyze a damaged structure, and related results are presented.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.297-302
• /
• 2017

Structural reanalysis is frequently utilized to reduce the computational cost so that the process of design or optimization can be accelerated. The supports can be regarded as the design variables and may be modified in various types of structural optimization problems. The location, number, and type of supports can make a great impact on the performance of the structure. This paper presents a unified method for structural static reanalysis with imposition or relaxation of some support constraints. The information from the initial analysis has been fully utilized and the computational time can be significantly reduced. Numerical examples are used to validate the effectiveness of the proposed method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.201-208
• /
• 2003

Since the real steel box girder bridges have a large number of design variables and show complex structural behavior, it would be impractical to directly use the algorithm for its optimum design. Thus, in this study, for optimum design of real steel box girder bridge, approximated reanalysis using an higher-order Improved self-adjusted Convex Approximation (ISACA) which was newly proposed on a previous study by the author is applied for the numerical efficiency. To demonstrate the efficiency, robustness, and convergence of the approximated reanalysis technique using the ISACA, a real bridge having two continuous spans is used as an illustrative example. From the results of the numerical investigation, it may be positively stated that the efficiency, robustness, and convergence of the approximated reanalysis using an ISACA is superior compared with the previous approximated reanalysis techniques.