• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.241-246
• /
• 2006

The paper presents the preparations work and experiences gained from realtime GPS car monitoring during the European Rally Championships organized on 10-12 June 2005 in Poland. The developed system is based on GPS and GSM/GPRS technology. Distribution and teletransmission of data are possible using different GSM operators in Poland, which makes the system fully independent. The system's server collects data from rally cars, processing and send data through VPN connections to the SQL server located in main control room. Data can be collected in real time via Internet or GPRS. Some information on GSM/GPRS range during rally championships are also presented in the paper. The study covered many trials and tests of different software and various configurations of the GPRS modems before finally the system started to work. Information coming from 10 Rally Cars were collected to the SQL Server continuously in one second interval. In real time mode these all data were displayed simultaneously in the rally main control room and in the rally press conference room. Paper describes also adopted emergency procedures and remote reconfiguration of GPS/GPRS boxes inside rally cars made during championships. Some problems and method of practical solutions are presented to avoid active jamming dangerous for a driver and his pilot, having system of communication intercoms jammed by teletransmission of GPRS 900/1800 MHz. In cooperation with rally teams special GPS/GPRS safety boxes were designed and made. Monitoring of all 7 rally stages with GPS receivers and method of calibrations of the maps were presented. GSM signal coverage was also checked in all stages. All data transmitted from rally cars were recorded in the computer. Some of our GPS cars had accidents and dispite them information were continuously sent to server. There is possibility to show in post mission mode the position of chosen cars in our rally application. Some information of best rally cars are presented also in the paper.

• Geotechnical Engineering
• /
• v.26 no.9
• /
• pp.33-47
• /
• 2010

Underground constructions continue to provide challenges to Geotechnical Engineers yet they pose the best opportunities for development and deployment of advance technologies for analysis, design and construction. The reason for this is that, by virtue of the nature of underground constructions, more data and information on ground characteristics and response become available as the construction progresses. However, due to several barriers, these data and information are rarely, if ever, utilized to modify and improve project design and construction during the construction stage. To enable the use of evolving realtime data and information, and adaptively modify and improve design and construction, the paper presents an analysis and design system, called AMADEUS, for underground projects. AMADEUS stands for Adaptive, real-time and geologic Mapping, Analysis and Design of Underground Space. AMADEUS relies on recent advances in IT (Information Technology), particularly in digital imaging, data management, visualization and computation to significantly improve analysis, design and construction of underground projects. Using IT and remote sensors, real-time data on geology and excavation response are gathered during the construction using non-intrusive techniques which do not require expensive and time-consuming monitoring. The real-time data are then used to update geological and geomechanical models of the excavation, and to determine the optimal, construction sequences and stages, and structural support. Virtual environment (VE) systems are employed to allow virtual walk-throughs inside an excavation, observe geologic conditions, perform virtual construction operations, and investigate stability of the excavation via computer simulation to steer the next stages of construction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1793-1798
• /
• 2007

Recently there are some trends to construct smart home system infrastructure depending upon the development of Information and Communication Technology. Also requirements of the Ubiquitous Healthcare Systems at home which can monitor the status of health continuously are increased rapidly comparing with hospitals. Healthcare service can be divided into two categories. The first one is Alarm Service that can be used for the emergency status and the other one is Remote Support Service which can monitor the patient including home environments and give those diagnosis information to medical office or to his family. Generally wired networks and fixed healthcare measuring system have some limits to transmit reliable realtime based information for both categories described above comparing with portable monitoring system. Getting over the inefficiency we will design and implement portable healthcare system under the wireless Zigbee network environments.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.337-350
• /
• 2004

Because of a security problem and not enough IPv4 address space, the home network has been made up of private network, and it has been separated from Internet. This fact prevents people in Internet from controlling and monitoring home appliances. So, this paper designs and Implements the UPnP Proxy System which offers functions for users to control and monitor home appliances. When users are in the outside of the home network, they do not know which devices were connected in the home network because the advertisement messages of UPnP devices would not be delivered to the outside of the home network. Also, users cannot access devices directly, and their control messages are not delivered into the home network. So, this paper designs and implements the UPnP Proxy System to solve these problems. The merit of the system is that users can control and monitor home appliances in realtime using presentation web documents with the HTTP push technology.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.3
• /
• pp.9-17
• /
• 2013

Geospatial information data came recently in use to build the location-based service in various fields. These data were shown via a 2-D map in the past but now can be viewed as a 3-D map due to the dramatic evolution of IT technology, thus improving efficiency and raising practicality to a greater extent by providing a more realistic visualization of the field. In addition, many previous GIS applications have been provided under desktop environment, limiting access from remote sites and reducing its approachability for less experienced users. The latest trend offers service with web-based environment, providing efficient sharing of data to all users, both unknown and specific internal users. Therefore, real-time information sensors that have been installed on steep slopes are to be integrated with 3-D geospatial information in this study. It is also to be developed with web-based environment to improve usage and access. There are three steps taken to establish this system: firstly, a 3-D GIS database and 3-D terrain with higher resolution aerial photos and DEM (Digital Elevation Model) have been built; secondly, a system architecture was proposed to integrate real-time sensor information data with 3D Web-based GIS; thirdly, the system has been constructed for Gangwon Province as a test bed to verify the applicability.