• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.157-167
• /
• 2006

During the first and second NGIS projects by the Korean government, The first one (1995~2000) was limited on constructing geographic information and the second (2001~2005) was focused on circulation and practical use of geoinformation from the result of the first project. In the latter half of 2nd NGIS project, However, the geographic information from the NGIS projects have not been renewed even though there were significant geographical changes. The accurate renewal of geoinformation is a matter of great importance to the next generation industry (e.g. LBS, Ubiquitous, Telematics). In this respect, it is time to update the geographic information in the latter half of the second NGIS project. Therefore, It is not only important to build an accurate geoinformation but also rapid and correct renewal of the geoinformation. NGII (National Geographic Information Institute) has been studying for improvement of digital map that was constructed by the result of the 1st NGIS project. Through the construction of clean digital map, NGII constructed Framework Data to three kinds of formats (NGI, NDA, NRL). Framework Data was contained to other database, and provided the reference system of location or contents for combining geoinformation. Framework Data is consist of Data Set, Data Model and UFID (Unique Feature Identifier). It will be achieved as national infrastructure data. This paper attempts to explore a method of the update to practical framework data with realtime geoinformation on feature's creation, modification and destruction managed by 'Feature management agency' using UFID's process. Furthermore, it suggests a method which can provide important data in order to plan the Framework update with the land change ratio.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.78-88
• /
• 2014

Now, UTIS collects and provides traffic information by building RSE 1,150(unit) and OBE about 51,000(vehicle). it's inevitable to enlarge traffic information sources which use to improve quality of UTIS traffic information for Stabilizing UTIS's service. but there are missing data sections. And, In this study as a way to overcome these problems, based on BIS(Bus information system) installed and operating in the capital area to develop normal vehicle's link transit time estimation model which is used realtime collecting BMS data, we'll utilize the model to provide missing data section's information. For these problem, we selected partial section of suwon-city, anyang-city followed by drive only way or not and conducted model estimating and verification each of BMS data and UTIS traffic information. Consequently, Case2,4,6,8 presented highly credibility between UTIS communication data and estimated value but In the Case 3,5 we determined to replace communication data of UTIS' missing data section too hard for large error. So we need to apply high credibility model formula adjusting road managing condition and the situation of object section.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.384-390
• /
• 2010

Since many accidents have been constantly occurring in the workplace, requirements of Industrial Safety Management have also been increasing. In order to meet the needs and prevent the problems in advance, we designed wireless sensor network system based on PLC. This system is set with amain node including PLC Modem and Zigbee in the every workplace and each wireless sensor node is attached to every worker in the workplace. The main node is supposed to transmit and receive sensor data, and the data which is from a wireless sensor node to the main node is delivered to monitoring PC through PLC. In this paper, it is expected that, by perceiving the realtime situation of the work place through this system, we could prevent the problems in advance and reduce damages by accidents.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1207-1212
• /
• 2018

The ultrasound image uses ultrasonic pulses to receive the reflected waves and construct an image necessary for diagnosis. At this time, when the signal becomes weak, noise is generated and a slight difference in brightness occurs. In addition, fluctuation of image due to breathing phenomenon, which is the characteristic of ultrasound image, and change of motion in real time occurs. Such a noise is difficult to recognize and diagnose visually in the analysis process. In this paper, morphological features are automatically extracted by using image processing technique on ultrasound acquired images. In this paper, we implemented a GPU - based fast filter using a cloud big data processing platform for image processing. In applying the GPU - based high - performance filter, the algorithm was run with performance 4.7 times faster than CPU - based and the PSNR was 37.2dB, which is very similar to the original.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2820-2827
• /
• 2015

HSMS communication system using low-cost micro controller units(MCUs) is an essential technique for online semiconductor equipment system developments. It is intended as an alternative to SEMI E4 (SECS-I) for applications where higher speed communication is needed and the facilitated hardware setup is convenient. In this paper, an HSMS communication system using low-cost MCUS is designed and implemented. Using a MCU with a low price but high-performance as a main board, a module which processes HSMS communication is designed, and a circuit is designed to process BCR independently with a microminiature MCU. To convert tag data which is recognized from BCR into data based on HSMS communication protocol, SECS-II message is designed. Lastly, an HSMS communication system is implemented based on these designs. A low-cost HSMS communication module developed in this study can be applied in realtime monitoring and controlling system for semiconductor processes.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3011-3018
• /
• 2000

On ATM networks, ABR services are provided using the remained bandwidth after allocating CBR and VBR traffic. Realtime services such as transmitting audio or video data may be provided using CBR and VBR which have a constrained transmission delay, but in these cases, the communications bandwidth may be wasted. This paper proposes an efficient bandwidth allocation algorithm to transfer real-time data using ABR service. The proposed algorithm guarantees MCR and allocates bandwidth to each connection proportional to its MCR. The proposed algorithm divides the connections in two groups - a satisfied state group and a bottlenecked state group - and enhances bandwidth utilization by allowing the remained bandwidth after allocating the connections in the satisfied state to be allocated to the connections in the bottlenecked state. Our algorithm uses a Queue control function proposed by Ghani[5] to keep the Queue length within some boundary, which makes the transmission delay constant. We simulate and compare the performance of the proposed algorithm with that of the algorithms proposed by ATM Forum[1] and Kalampoukas[2].

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.2
• /
• pp.199-206
• /
• 2015

In this study, a new diagnosis method which can predict the working states of a pipe or its element in realtime is proposed by using an artificial neural network. The displacement data of an inspection element of a piping system are obtained by the use of PIV (particle image velocimetry), and are used for teaching a neural network. The measurement system consists of a camera, a light source and a host computer in which the artificial neural network is installed. In order to validate the constructed monitoring system, performance test was attempted for two kinds of mobile phone of which vibration modes are known. Three values of acceleration (minimum, maximum, mean) were tested for teaching the neural network. It was verified that mean values were appropriate to be used for monitoring data. The constructed diagnosis system could monitor the operation condition of a gas pipe.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.64-74
• /
• 2003

This paper proposes a new autonomous stationkeeping system suitable for geostationary satellite and conducts computer simulation to verify the proposed algorithm. The proposed onboard system receives pseudo-range signal from ground equipments located at two different position with long baseline, determines the orbit error in realtime and generates orbit control commands. For minimized onboard stationkeeping logic and better reliability, the orbit controller is designed to generate control signal to have the orbit roughly follow predetermined reference range data which is generated through ground based computer simulation. The reference range data is assumed to be uploaded with time tag. A simple orbit controller is proposed which combines the reference $\Delta$V and feedback control signal. Finally, the performance of the proposed system is verified through the computer simulations.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

Since its launching on 21 December 1999, the KOrea Multi-Purpose SATellite-Ⅰ (KOMPSAT-Ⅰ) has been successfully operated by the Mission Control Element (MCE), which was developed by the Electronics and Telecommunications Research Institute (ETRI). Most of the major functions of the MCE have been successfully demonstrated and verified during the three years of the mission life of the satellite. The Mission Analysis and Planning Subsystem (MAPS), which is one of the four subsystems in the MCE, played a key role in the Launch and Early Orbit Phase (LEOP) operations as well as the on-orbit mission operations. This paper presents the operational performances of the various functions in MAPS. We show the performance and analysis of orbit determinations using ground-based tracking data and GPS navigation solutions. We present four instances of the orbit maneuvers that guided the spacecraft from injection orbit into the nominal on-orbit. We include the ground-based attitude determination using telemetry data and the attitude maneuvers for imaging mission. The event prediction, mission scheduling, and command planning functions in MAPS subsequently generate the spacecraft mission operations and command plan. The fuel accounting and the realtime ground track display also support the spacecraft mission operations. We also present the orbital evolutions during the three years of the mission life of the KOMPSAT-Ⅰ.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.60-64
• /
• 2007

Increasing using multimedia services as VoIP, Video conference, DMB, IPTV, etc, it is necessary to increase network traffics and develop the mechanism about a flow control for real time traffic transmission. In order to transfer realtime multimedia data, the transfer rate can be control on network state data measuring packet losses of a receiver and delay time of packets through getting periodical feedback RTP/RTCP packet. This paper describes using efficiant flow control on multicast that can reduce errors according to getting feedback tranfer delay and proposes the mechanism that can adapt dynamic change of network. In simulation, the transfer rate can efficiently be control on dynamic change of network and it makes the maximum of the use of a bandwidth and the minimum of packet losses.