• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.245-250
• /
• 2008

Recently the numerical prediction technique is applied to many fields, because numerical models are developed so much for last decades. The real-time ocean prediction system is one of them and is capable of providing the real-time marine information for users to promote the safety af maritime traffic and preservation of marine resources. The system is composed of observing system, data distribution system and modelling system. In this study authors develop the modelling system and show the results as preliminary study for establishing the real-time ocean prediction system in Busan port. The system test is performed only for M2 tidal modelling due to the lack qf observation data, thus a full-scale test is required in future if enough data are provided Also observing system and data distribution system will be constructed continuously in future, then service for real-time data for users will be initiated.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.39-47
• /
• 1997

This paper presents a single board digital signal processing system which can perform two-dimensional (2-D) digital infinite impulse response (IIR) filtering in realtime. We have developed an architecture to provide not only the necessary computational power but also a balance of the system input/output and computational requirements. The architecture achieves large system throughput by using highly parallel processing at both the system and processor levels. It reduces system data communication requirements significantly by taking advantage of a custom-designed processor and by providing each processor with its own input and ouput channel. After system initialization, almost 100 percent of the time is used for data processing. Data transfers occur concurrently with data processing. The functional level simulation reveals that the system throughput can reach as high as one pixel per system cycle. With only 10MHz clock frequency system, it can implement up to fourth order 2-D IIR filters for video-rate data ($512\times512$ pixels per frame at 30 frames per second). If we increase the system frequency, the system can be used for the preprocessing and postprocessing of video signal of HDTV.

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.345-358
• /
• 2002

DGPS(Differential Global Positioning System) and RTK(Real time Kinematic) are in one of today's most widely used surveying techniques. However surveying with these techniques is restricted by the distance between reference and rover station, and it is difficult to process data in realtime by their own organizational limitation in precise measurement of positioning. To meet these new demands, in this paper, new DGPS and RTK correction data services through the Internet and PSTN(Public Switched Telephony Network) have been proposed. For this purpose, a DGPS and RTK error correction data transmission system is implemented for long-distance using the Internet and PSTN which allows a mobile user at which the rover receiver is located to receive the correction data from the reference in realtime, and analyzed and compared with DGPS and RTK performances by experiments through the Internet and PSTN for the distance and the time.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1478-1484
• /
• 2004

This paper presents a method that controls facial expression in realtime of 3D avatar by having the user select a sequence of facial expressions in the space of facial expressions. The space of expression is created from about 2400 frames of facial expressions. To represent the state of each expression, we use the distance matrix that represents the distances between pairs of feature points on the face. The set of distance matrices is used as the space of expressions. Facial expression of 3D avatar is controled in real time as the user navigates the space. To help this process, we visualized the space of expressions in 2D space by using the Principal Component Analysis(PCA) projection. To see how effective this system is, we had users control facial expressions of 3D avatar by using the system. This paper evaluates the results.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.8
• /
• pp.301-308
• /
• 2015

SNS is a web-based online platform service supporting the formation of relations between users. SNS users have usually used a desktop or laptop for this purpose so far. However, the number of SNS users is greatly increasing and their access to the web is improving with the spread of smart phones. They share their daily lives with other users through SNSs. We can detect events if we analyze the contents that are left by SNS users, where the individual acts as a sensor. Such analyses have already been attempted by many researchers. In particular, Twitter is used in related spheres in various ways, because it has structural characteristics suitable for detecting events. However, there is a limitation concerning the detection of events and their locations. Thus, we developed a system that can detect the location immediately based on the district mentioned in Twitter. We tested whether the system can function in real time and evaluated its ability to detect events that occurred in reality. We also tried to improve its detection efficiency by removing noise.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.387-396
• /
• 2009

No-Reference video-quality assessments are divided into two kinds of metrics based on decoding pixel domain or the bitstream one. Traditional full-/reduced- reference methods have difficulty to be deployed as realtime video transmission because it has problems of additional data, complexity, and assessment accuracy. This paper presents simple and highly accurate no-reference video-quality assessment in realtime video transmission. Our proposed method uses quantization parameter, motion vector, and information of transmission error. To evaluate performance of the proposed algorithm, we perform subjective test of video quality with the ITU-T P.910 Absolute Category Rating(ACR) method and compare our proposed algorithm with the subjective quality assessment method. Experimental results show the proposed quality metric has a high correlation (85%) in terms of subjective quality assessment.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.174-181
• /
• 2001

In this study, the architecture of the Web Camera System for realtime monitoring on Internet is proposed and implemented in two different structures. In the one architecture, a Web-server and a Camera-server are implemented on the same system, and the system transfers motion pictures compressed to JPEG file to users on the WWW(World Wide Web). In the other architecture, the Web-server and the Camera-server are implemented on different systems, and the motion pictures are transferred from the Camera-server to the Web-server, and finally to users. For JPEG image transferring in the Web Camera system, the Java Applet and the Java Script are used to maximize flexibility of the system from the Operating system and the Web browsers. In order to compare system performance between two architectures, data traffic is measured and simulated in the unit of byte per second.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.151-155
• /
• 2017

With the rapid growth of the up-to-date wireless network and Internet technologies, huge and various types of things around us are connected to the Internet and build the hyper-connected society, and lots of smart applications using these technologies are actively developed recently. IoT connects human, things, space, and data with various types of networks to construct the hyper-connected network that can create, collect, share and appling realtime information. Furthermore, most of the smart applications are concentrated on the service that can collect and store realtime contexts using various sensors and cloud technology, and provide intelligence by making inferences and decisions from them nowadays. In this paper, we design a smart application that can accurately control and process the current state of the specific context in realtime by using the state-of-the-art ICT techniques such as various sensors and cloud technologies on the IoT based mobile computing environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.45-53
• /
• 2015

Adaptive support-weight based algorithm can produce better disparity map compared to generic area-based algorithms and also can be implemented as a realtime system. In this paper, we propose a realtime system based on geodesic support-weight which performs better segmentation of objects in the window. The data scheduling is analyzed for efficient hardware design and better performance and the parallel architecture for weight update which takes the longest delay is proposed. The exponential function is efficiently designed using a simple step function by careful error analysis. The proposed architecture is designed with verilogHDL and synthesized using Donbu Hitek 0.18um standard cell library. The proposed system shows 2.22% of error rate and can run up to 260Mhz (25fps) operation frequency with 182K gates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.119-122
• /
• 2007

In this paper, we propose the method of hardware-design for the division operation of image frame-unit processing in mobile phone camera. Generally, there are two types of the data processing, which are the parallel and serial type. The parallel type makes it possible to process in realtime, but it needs significant hardware size due to many comparators and buffer memories. Compare the serial type with the parallel type, the hardware size of the serial type is smaller than the other because it uses only one comparator, but serial type is not able to process in realtime. To use the hardware resources efficiently, we employ the serial divider since frame-unit operation for image processing does not need realtime process. When compared with both in the same bit size and operating frequency, the hardware size of the serial divider is approximately in the ratio of 13 percentage compared with the parallel divider.