• Title/Summary/Keyword: Realized value

Search Result 428, Processing Time 0.028 seconds

LaNiO$_3$전도성 세라믹의 합성과 도전특성 (Synthesis and Conductivity Properties of LaNiO$_3$ Ceramic Conductors)

  • 조정호;조주현;김강언;정수태
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.406-409
    • /
    • 2001
  • The conductivity properties and synthesis of LaNiO$_3$ ceramics from La$\sub$1+$\delta$/NiO$_3$($\delta$=--0.06, 0, 0.06) were investigated. A single perovskite phase was realized at 800$^{\circ}C$. La$_2$NiO$_4$ and other unexpected oxide were observed at 1000$^{\circ}C$. The Microstructure was showed clearly that it is a low density porous material. LaNiO$_3$ ceramic showed a metallic conductivity. The conductivity of La rich samples had a higher value than the La poor samples.

  • PDF

제한된 각도에서 단층영상 획득을 위한 역투사 후 필터링 방법 (Backprojection Filtering Method for Limited Angle Tomography)

  • 조민국;김호경;인지혜;김태우
    • 대한의용생체공학회:의공학회지
    • /
    • 제29권1호
    • /
    • pp.46-51
    • /
    • 2008
  • We describe a backprojection filtering method for limited angle tomography. In order to reduce blur artifacts originated from the out-of-planes and control high-frequency noise, we employed two band-limited window functions, and which were realized by Hann filters in this study. Based on the experimentally measured data, the performance of the developed method is demonstrated by comparing with the conventional shift-and-add and filtered backprojection methods. Application of the developed method to the dental imaging has a potential to be used for the preoperative evaluation of the jaw for dental implants with much reduced patient dose instead of the conventional dental computed tomography.

직접변환 방식 수신기용 이득 조정 연속시간필터 설계 (Design of Gain- Tuning Continuous-Time Filter for Direct-Conversion Receiver)

  • 김병욱;방준호;김영민
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.515-516
    • /
    • 2007
  • A novel design of contious-time filter for direct conversion receiver applications is proposed. The filter supports different modes including GSM, WCDMA. A 5th chebyshev filter is realized in a gm-C filter topology. The filter circuit is implemented in a standard CMOS $0.35{\mu}m$ processing parameter with a supply voltage of 2.5V. The HSPICE results show that the filter has 200KHz and 5MHz cutoff frequency, and each 3.4us and 85.44us gm value.

  • PDF

유도전동기 회전자 저항 변동에 강인한 슬립제어기 (A Robust Slip Controller for the Variation of Rotor Resistance of Induction Motors)

  • 강현수;조순봉;이택기;현동석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.224-226
    • /
    • 1995
  • This paper presents an algorithm that the gain of the slip calculator is correctly adjusted for the variation of the rotor resistance. In the indirect field oriented controller, if the gain (rotor resistance) of the slip calculator is set the incorrect value, the torque and the flux are not properly controlled. Using of the two torque angles (i.e. stationary torque angle and rotating torque angle), we estimate the rotor resistance, and then adjust the gain of the slip calculator for the variation of the rotor resistance. It has been realized to confirm the validity of the proposed algorithm by the simulation results.

  • PDF

유도전동기의 토크 속응제어방식에 근거한 속도 추정법의 제안 (A Speed Estimation based on the Very Quick Torque Control method of Induction Motors)

  • 정석권;전봉환;김상봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.255-257
    • /
    • 1995
  • In this paper, a new speed estimation method of induction motors based on the very quick torque control is proposed to realize speed sensorless control. The proposed method can be realized very simply by detecting primary motor current and voltage command at every sampling time. As the method need not the differential value of primary current in a arithmetic of voltage command, it can be expected to promote the precision of speed estimation in low speed area, especially. Through the numerical simulation, the validity of the proposed method was successfully confirmed.

  • PDF

THE CONTROL OF PERMITTIVITY IN THE Ni-Zn FERRITE ABSORBER

  • Cho, S.B.;Oh, J.H.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.730-734
    • /
    • 1995
  • The variation of magnetic permeability and dielectric constant and their relationship with microwave absorbing properties are investigated in sintered Ni-Zn ferrite. Toroid specimens of ${(Ni_{0.5}Zn_{0.5}O)}_{1-y}{(Fe_{2}O_{3})}_{1+y}$ ferrites are prepared by conventional ceramic processing technique. The large change in magnetic permeability is observed by the variation of excess $Fe_{2}O_{3}$ in the Ni-Zn ferrites. The more the iron-excess from y=0.04 to y=0.12, the lower value of both $\mu_{r}'$ and $\mu_{r}"$ is observed. However dielectric permittivity increases with the increase of the increase of the excess $Fe_{2}O_{3}$. The control of permittivity is realized by nitrogen sintering atmosphere and excess $Fe_{2}O_{3}$ respectively.

  • PDF

Optimization of the Emission Spectrum of Red Color in Quantum Dot-Organic Light Emitting Diodes

  • Jeong, Byoung-Seong
    • 공업화학
    • /
    • 제32권2호
    • /
    • pp.214-218
    • /
    • 2021
  • We investigated the optimal stacked structure from the perspective of process architecture (PA) through emission spectrum analysis according to the wavelength of quantum dot (QD)-organic light-emitting diodes (OLED). We confirmed that the blue-light leakage through the QD can be minimized by increasing the QD filling density above a critical value in the red QD (R-QD) layer. In addition, when the thickness of red-color filter (R-CF) at the upper part of the R-QD increased to more than 3 ㎛, the leakage of blue light through the R-CF was effectively blocked, and a very sharp emission spectrum in the red wavelength band could be obtained. According to these outstanding results, we expect that the development of QD-OLED displays with very excellent color gamut can be possibly realized.

A Study on the Elements of Chinese Animation IP (Intellectual Property) Development Based on the Pan-Entertainment Industry

  • Yan, JiHui;Lee, Byung Chun;Yun, Taesoo
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제13권1호
    • /
    • pp.168-179
    • /
    • 2021
  • With the introduction of China's new policies, the Chinese animation industry has gradually formed a sustainable industrial structure chain, and the output value of the animation market is also in a state of continuous growth. Since 2013, domestic animation has been developing from "lower age" to "ageing" and "adults". At the same time, with the popularization of China's pan-entertainment industry model, the multi-domain symbiosis of the Internet and mobile Internet has been realized, creating a fan economy of star IP (Intellectual Property), and promoting the linkage of various industries under the same IP. This paper mainly analyzes the development of the animation IP market in China's pan-entertainment mode in recent years, and analyzes the cross-media operation mode of the animation industry. At the same time, it studies the application of self-media in animation.

Accurate Segmentation Algorithm of Video Dynamic Background Image Based on Improved Wavelet Transform

  • Ming, Ming
    • Journal of Information Processing Systems
    • /
    • 제18권5호
    • /
    • pp.711-718
    • /
    • 2022
  • In this paper, an accurate segmentation algorithm of video dynamic background image (VDBI) based on improved wavelet transform is proposed. Based on the smooth processing of VDBI, the traditional wavelet transform process is improved, and the two-layer decomposition of dynamic image is realized by using two-dimensional wavelet transform. On the basis of decomposition results and information enhancement processing, image features are detected, feature points are extracted, and quantum ant colony algorithm is adopted to complete accurate segmentation of the image. The maximum SNR of the output results of the proposed algorithm can reach 73.67 dB, the maximum time of the segmentation process is only 7 seconds, the segmentation accuracy shows a trend of decreasing first and then increasing, and the global maximum value can reach 97%, indicating that the proposed algorithm effectively achieves the design expectation.

Dynamics of the IBR-2M reactor at a power pulse repetition frequency of 10 Hz

  • Yu.N. Pepelyshev;D. Sumkhuu
    • Nuclear Engineering and Technology
    • /
    • 제55권9호
    • /
    • pp.3326-3333
    • /
    • 2023
  • The results of the analysis of a mathematical modeling for the IBR-2M pulsed reactor dynamics for a transition from a power pulse repetition frequency of 5 Hz-10 Hz are presented. The change in the amplitude response of the reactor for variable pulse delayed neutron fraction was studied. We used a set of power feedback parameters determined experimentally in 2021 at an energy output of 1820 MW·day. At a pulse repetition frequency of 10 Hz, the amplitude of pulse energy oscillations significantly depends on the value of the delayed neutron fraction in pulse βp. Depending on βp both suppression and amplification of reactor power fluctuations in the frequency ranges of 0.05-0.20 and 1.25-5.00 Hz can be realized.