• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.317-324
• /
• 2005

현재 인터넷관련 기술은 단순한 2D로부터 상호작용 하는 3D 컨텐츠 형태로 변화하고 있다. 본 논문에서는 저작도구인 TurnTool를 이용하여 고품질의 상호대화식 Web3D 컨텐츠를 구현하고 이를 제품 매뉴얼 제작에 응용한다. 여기에서, 보다 사실적이고 사용자와의 상호작용이 가능한 Web3D 매뉴얼을 쉽고 빠르게 구현하는 방법을 제시한다. 이것은 기존의 Web3D 컨텐츠 저작도구들이 가진 문제점을 보완한다. 따라서 용량을 최소화하고, 구현 과정을 축소하여 제작 시간을 줄이며, 별도 EAI(External Authoring Interface)의 연계 없이 자바 스크립트를 사용하여 쉽게 상호작용이 가능한 컨텐츠를 구현 할 수 있다.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.267-279
• /
• 2004

A modelling scheme for the stress analysis taking into account load transfer characteristics of the osseointegrated interfaces between dental implant and surrounding alveolar bone was investigated. Main aim was to develop a more realistic simulation methodology for the load transfer at the interfaces than the prefect bonding assumption at the interfaces which might end up the reduced level in the stress result. In the present study, characteristics of osseointegrated bone/implant interfaces was modelled with material nonlinearity assumption. Bones at the interface were given different stiffness properties as functions of stresses. Six different models, i.e. tens0, tens20, tens40, tens60, tens80, and tens100 of which the tensile moduli of the bones forming the bone/implant interfaces were specified from 0, 20, 40, 60, 80, and 100 percents, respectively, of the compressive modulus were analysed. Comparisons between each model were made to study the effect of the tensile load carrying abilities, i.e. the effectivity of load transfer, of interfacial bones on the stress distribution. Results of the present study showed significant differences in the bone stresses across the interfaces. The peak stresses, however, were virtually the same regardless of the difference in the effectivity of load transfer, indicating the conventional linear modelling scheme which assumes perfect bonding at the bone/implant interface can be used without causing significant errors in the stress levels.

• Tribology and Lubricants
• /
• 제30권5호
• /
• pp.247-255
• /
• 2014

Charged polymer chains, i.e., polyelectrolytes, are known to show superior aqueous lubricating properties compared to those of neutral polymer chains, especially in brush conformation. This is primarily because of the incorporation of a large amount of counterions within the polymer layers and the consequently increased osmotic pressure. However, this effect is active only when the polymer chains remain immobilized even under tribostress, which is not realistic for high-contact pressure tribological applications, especially when they are irreversibly immobilized on tribopair surfaces. In contrast, with free polymers, which can be included as surface-active additives in the base lubricant (water), long-term lubricating performance based on "self-healing" properties is readily expected. In order to assess whether the superior aqueous lubricating properties of polyelectrolyte chains are valid for free polymers too, this study reviews recent studies on the tribological properties of many charged biopolymer and synthetic copolymers at a nonpolar, hydrophobic interface. In contrast to the irreversibly immobilized polyelectrolyte chains, free polyelectrolyte chains show inferior aqueous lubricating properties compared to their neutral counterparts owing to charge accumulation and the consequently impeded surface adsorption on the nonpolar surface. Nevertheless, bovine submaxillary mucin (BSM), a representative biopolymer, shows a sufficiently effective surface adsorption and aqueous lubricating capabilities even at neutral pH without losing the polyanionic characteristics.

• 대한전자공학회논문지TE
• /
• 제42권1호
• /
• pp.69-76
• /
• 2005

멀티미디어 환경을 통한 비동기원격교육 시스템의 설계에 있어서 중요한 이슈는 상호작용과 일반 사용자가 얼마나 편리하고 용이하게 사용할 수 있느냐를 결정해 주는 사용자 인터페이스 설계에 있다. 본 연구에서 개발한 비동기 원격교육 시스템이 기존 시스템과 차별화된 현저한 특성은 비동기 원격교육에 꼭 필요한 멀티미디어적이고 사실적인 메타포를 사용하여 만들어졌으며, 학습자들이 즉석에서 피드백 효과를 거둘 수 있도록 상호작용적으로 설계되었다는 것, 그리고 퍼포먼스 측면을 고려하여 설계되어졌다는 것이며 교육공학적인 인터페이스 설계원리를 바탕으로 설계되었다는 것이다.

• 대한산업공학회지
• /
• 제32권2호
• /
• pp.111-119
• /
• 2006

In the last decade, the research of the usability of mobile phones has been a newly evolving area with few established methodologies and realistic practices that ensure capturing usability in evaluation. Thus, there exists a growing demand to explore appropriate evaluation methodologies that evaluate the usability of mobile phones quickly as well as comprehensively. This study aims to develop a task-based usability checklist based on heuristic evaluation in views of mobile phone UI practitioners. A hierarchical structure of UI design elements and usability principles related to mobile phones were developed and then utilized to develop the checklist. In order to demonstrate the practical effectiveness of the proposed checklist, comparative experiments were conducted on the usability checklist and usability testing. A majority of usability problems found by usability testing and additional problems were discovered by the proposed checklist. It is expected that the usability checklist proposed in this study could be used quickly and efficiently by usability practitioners to evaluate the mobile phone UI in the middle of the mobile phone development process.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.463-474
• /
• 2015

Future Ground Control Stations (GCSs) for Unmanned Aerial Vehicles (UAVs) teleoperation targets better situational awareness by providing extra motion cues to stimulate the vestibular system. This paper proposes a new virtual environment for long range Unmanned Aerial Vehicle (UAV) control via Non-Line-of-Sight (NLoS) communications, which is based on motion platforms. It generates motion cues for the teleoperator for extra sensory stimulation to enhance the guidance performance. The proposed environment employs the distributed component simulation over GSM network as a simulation platform. GSM communications are utilized as a multi-hop communication network, which is similar to global satellite communications. It considers a UAV mathematical model and wind turbulence effects to simulate a realistic UAV dynamics. Moreover, the proposed virtual environment simulates a Multiple Axis Rotating Device (MARD) as Human Machine Interface (HMI) device to provide a complete delay analysis. The demonstrated measurements cover Graphical User Interface (GUI) capabilities, NLoS GSM communications delay, MARD performance, and different software workload. The proposed virtual environment succeeded to provide visual and vestibular feedbacks for teleoperators via GSM networks. The overall system performance is acceptable relative to other Line-of-Sight (LoS) systems, which promises a good potential for future long range, medium altitude UAV teleoperation researches.

• 대한의용생체공학회:의공학회지
• /
• 제32권4호
• /
• pp.295-304
• /
• 2011

In this study, we evaluated the EEG based BCI algorithm using common spatial pattern to find realistic applicability using neurofeedback EEG based BCI algorithm - EEG mode, feature vector calculation, the number of selected channels, 3 types of classifier, window size is evaluated for 10 subjects. The experimental results have been evaluated depending on conditioned experiment whether neurofeedback is used or not In case of using neurofeedback, a few subjects presented exceptional but general tendency presented the performance improvement Through this study, we found a motivation of development for the specific classifier based BCI system and the assessment evaluation system. We proposed a need for an optimized algorithm applicable to the robust motor imagery evaluation system with more useful functionalities.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.5-8
• /
• 2001

광대역 코드분할다중 접속은 가장 광범위하게 채택되고 있는 3세대 무선접속이다. 무선접속의 물리계층은 표준화 과정에서 주요 토의 주제이다. 본 논문은 실제적인 환경에서 많은 고려 가능한 전송 시나리오상에서 상향 WCDMA 성능을 조사하는 것이 목적이다. 본 논문의 초점은 주파수 선택적 페이딩 채널조건에서 다중 접속 간섭 및 혼합 서비스 환경 경우의 성능분석에 있다. 본 조사를 위해 시뮬레이터를 개발하였으며 다양한 WCDMA 의 무선접속 특징을 포함하고 있다. 시뮬레이션 결과에 의하면 성능은 다중접속 간섭에 의해 크게 영향을 받으며 또한 주파수 선택적 페이딩 조건에 의해 성능열화 현 상을 초래하게 되어 적절한 보상기술 적용이 요구된다.

• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.571-587
• /
• 2012

This paper presents results of a numerical analysis performed on a corrugated steel plate (CSP) bridge during a backfilling process. The analysed bridge structure was a box culvert having a span of 12315 mm as well as a clear height of 3550 mm. Obtained calculation results were compared with the experimental ones. The paper is presented with the application of the Fast Lagrangian Analysis of Continua (FLAC) program based on the finite differences method (FDM) to determine behaviour of the soil-steel bridge structure during backfilling. The assumptions of a computational 2D model of soil-steel structure with a non-linear interface layer are described. Parametric analysis of the interface element is also given in order to receive the most realistic calculation results. The method based on this computational model may be used with large success to design calculations of this specific type of structure instead of the conventional and fairly inaccurate analytical methods. The conclusions drawn from such analysis can be helpful mostly for the assessment of the behaviour of steel-soil bridge structures under loads of backfilling. In consideration of an even more frequent application of this type of structure, conclusions from the conducted analysis can be generalized to a whole class of similar structural bridge solutions.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.103-116
• /
• 2014

본 논문에서는 석션파일의 하중지지력 및 압밀 거동에 대한 수치해석 내용을 다루었다. 수치해석에서는 파일-지반 간 인터페이스 거동이 고려된 3차원 모델을 적용하여 석션파일의 길이 대 직경 비, 하중 형태(수직하중, 수평 및 조합하중)를 변화시키며 해석을 수행하고 그 결과를 토대로 수직 및 수평지지력 거동 특성을 고찰하였다. 아울러 임의의 수직하중이 작용하는 조건에 대해 응력-간극수압 연계해석을 수행하여 석션파일의 하중재하 후 압밀거동을 고찰하였다. 해석 결과 석션파일의 지지력은 석션파일과 지반간의 상호작용 모델링 여부에 따라 큰 차이가 발생하는 것으로 검토되어 인터페이스 모델링의 중요성이 부각되었으며 산정된 하중지지력 결과를 토대로 제시된 조합하중에 대한 파괴포락선을 제시하였다. 아울러 응력-간극수압 연계해석에 근거한 압밀해석 결과를 분석한 결과 석션파일은 주면마찰이 주 하중지지 구조인 관계로 수직하중 재하시 과잉간극수압 발생량 및 압밀침하량은 미미한 것으로 검토되었다.