• 한국정보기술학회 영문논문지
• /
• 제10권1호
• /
• pp.99-109
• /
• 2020

As environmental pollution has become severe due to the rapid increase in pollutant generation in the air, measurement, collection, and analysis of atmospheric environment information plays an important role. However, it is difficult to measure the high-resolution and real-time atmospheric environment of the cities and tourist spots with high population mobility only by measuring equipment of stationary measuring stations. Therefore, this paper proposes a portable atmospheric environment measurement system for real-time measurement and monitoring of atmospheric environment information. The proposed system is a portable client with a low-power wireless communication method. It is possible to reliably transmit and receive the measured data through a multi-threaded server to monitor the trend of pollutants in the air in real-time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4698-4716
• /
• 2017

Wireless signal transmission is influenced by environmental effects. These effects have also been challenging for Vehicular Ad hoc Network (VANET) in real-time communication. More specifically, in an urban environment, with high mobility among vehicles, a vehicle's status from the transmitter can instantly trigger from line of sight to non-line of sight, which may cause loss of real-time communication. In order to overcome this, a deterministic signal propagation model is required, which has less complexity and more feasibility of implementation. Hence, we propose a realistic path loss model which adopts ray tracing technique for VANET in a grid urban environment with less computational complexity. To evaluate the model, it is applied to a vehicular simulation scenario. The results obtained are compared with different path loss models in the same scenario based on path loss value and application layer performance analysis. The proposed path loss model provides higher loss value in dB compared to other models. Nevertheless, the performance of vehicle-vehicle communication, which is evaluated by the packet delivery ratio with different vehicle transmitter density verifies improvement in real-time vehicle-vehicle communication. In conclusion, we present a realistic path loss model that improves vehicle-vehicle wireless real-time communication in the grid urban environment.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.132-138
• /
• 2010

In the present study, the real-time monitoring system is developed based on the wireless sensor network (WSN) and power line communication (PLC) employed in the 3,000-ton-class training ship. The WSN consists of sensor nodes, router, gateway and middleware. The PLC is composed of power lines, modems, Ethernet gateway and phase-coupler. The basic tests show that the ship has rather good environments for the wired and wireless communications. The developed real-time monitoring system is applied to recognize the thermal environments of main-engine room and one cabin in the ship. The main-engine room has lots of heat sources and needs careful monitoring to satisfy safe operation condition or detect any human errors beforehand. The monitoring is performed in two regions near the turbocharger and cascade tank, considered as heat sources. The cabin on the second deck is selected to monitor the thermal environments because it is close to the heat source of main engine. The monitoring results of the cabin show the thermal environment is varied by the human activity. The real-time monitoring for the thermal environment would be useful for the planning of the ventilation strategy based on the traces of the human activity against inconvenient thermal environments as well as the recognizing the temperature itself in each cabin.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.29-34
• /
• 2007

This paper proposes a MAC protocol for real-time VBR (rt-VBR) services in wireless ATM networks. The proposed protocol is characterized by a contention-based mechanism of the reservation request, a contention-free polling scheme for transferring the dynamic parameters, and a priority scheme of the slot allocation. The design objective of the proposed protocol is to guarantee the real-time constraint of rt-VBR traffic. The scheduling algorithm uses a priority scheme based on the maximum cell transfer delay parameter. The wireless terminal establishes an rt-VBR connection to the base station with a contention-based scheme. The base station scheduler allocates a dynamic parameter minislot to the wireless terminal for transferring the residual lifetime and the number of requesting slots as the dynamic parameters. Based on the received dynamic parameters, the scheduler allocates the uplink slots to the wireless terminal with the most stringent delay requirement. The simulation results show that the proposed protocol can guarantee the delay constraint of rt-VBR services along with its cell loss rate significantly reduced.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.7-12
• /
• 2006

본 논문에서는 근거리 및 광역 무선 데이터 통신 상호 연동을 통한 실시간 원격 감시 시스템을 설계 제안하였다. 근거리 망은 소출력 무선 통신용 모듈을 사용하였고 광역망은 CDMA Cellular System의 Packet Data Service를 이용하여 구현하였다. Sensor Unit에서 수집된 데이터는 Data logger를 경유하여 Host computer로 전송되어 인터넷 망을 통하여 윈격 감시 제어 된다.

• Journal of Information Processing Systems
• /
• 제19권6호
• /
• pp.817-829
• /
• 2023

Variable wireless channel is a big challenge for real-time video applications, and the rate adaptation of realtime video streaming becomes a hot topic. Intra-video coding is important for high-quality video communication and industrial video applications. In this paper, we proposed a novel adaptive scheme for real-time video transmission with intra-only coding over a wireless network. The key idea of this scheme is to estimate the instantaneous remaining capacity of the network to adjust the quality of the next several video frames, which not only can keep low queuing delay and ensure video quality, but also can respond to bandwidth changes quickly. We compare our scheme with three different schemes in the video transmission system. The experimental results show that our scheme has higher bandwidth utilization and faster bandwidth change response, while maintaining low queuing delay.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.108-112
• /
• 2021

For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.36-41
• /
• 2009

The IEEE 802.16 wireless metropolitan area network (WMAN) standard is designed to correct expensive communication costs in CDMA-based mobile communication systems and limited coverage problems in wireless LAN systems. Thus, the IEEE 802.16e standard can provide mobile high-speed packet access between mobile stations and the Internet service provider through the base station with cheap communication fees. To efficiently accommodate voice over IP (VoIP) services in IEEE 802.16 systems, an uplink quality of service packet-scheduling scheme is proposed, and its performance is evaluated with an NS-2 network simulator in this paper. Numerical results show that this proposed scheme can increase the system capacity by 100% more than in the unsolicited rand service (UGS) scheme and 30% more than the extended real-time polling service (ertPS) scheme, respectively.