• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.94-96
• /
• 2004

In order to observe the thermal behavior of oil immersed power transformers the temperature rise prediction algorithm and monitoring system were developed. The algorithm is formulated into a computer program based on the TNM (Thermal Network Method) which was divided into several elements, and the temperature of each element was calculated according to each time lapse. A monitoring system can show the real time active part temperatures of the transformer under various electric loads and for any types of thermal environment.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.801-805
• /
• 2018

In this study, an underwater radiation detector was built using a GAGG(Ce) scintillator and silicon photomultiplier to establish an underwater radiation exposure monitoring system. The GAGG(Ce) scintillator is suitable for small radiation detectors as it strongly absorbs gamma rays and has a high light emission rate with no deliquescent properties. Additionally, the silicon photomultiplier is a light sensor with characteristics such as small size and low applied voltage. Further, a program and mobile app were developed to monitor the radiation coefficient values generated from the detector. According to the results of the evaluation of the characteristics of the underwater radiation monitoring system, when tested for its responsiveness to radiation intensity and reactivity, the system exhibited a coefficient of determination of at least 0.99 with respect to the radiation source distance. Additionally, when tested for its underwater environmental temperature dependence, the monitoring system exhibited an increase in the count rate up to a certain temperature because of the increasing dark current and a decrease in the count rate because of decreasing overvoltage. Extended studies based on the results of this study are expected to greatly contribute to immediate and continuing evaluation of the degree of radioactive contamination in underwater environments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.479-482
• /
• 2003

We propose a real time gas monitoring system for classifying various gases with different concentrations. Using thermal modulation of operating temperature of two sensors, we extract patterns of gases from the voltage across the load resistance. We adopt the relative resistance as a pre-processing method and an ART2 neural network as a pattern recognition method. The proposed method has been implemented in a real time embedded system with tin oxide gas sensors, TGS 2611, 2602 and an MSP430 ultra-low power microcontroller in the test chamber.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.414-420
• /
• 2003

The domestic needs for larger capability of power sources are increasing to cope with the expanding power load which results from the industrial developments & the progressed life style. In summer, the peak load is mainly due to the non-industrial reasons such as air-conditioners and other cooling equipments. To cover the concentrated peak load in stable, the power transmission lines should be more constructed and efficiently operated. The ampacity design of the underground cable system is generally following international standards such as IEC287, IEC60853 and JCS168 which regards the shape of 100% daily full power loads. It is not so efficient to neglect the real shapes of load curves generally below 60~70% of full load. The dynamic (real time) rating system tends to be used with the measured thermal parameters which make it possible to calculate the maximum ampacity within required periods. In this paper, the CTM(Conductor Temperature Monitoring) which is the base of dynamic rating systems for tunnel environment is proposed by a design of lumped thermal network ($\pi$-type thermal model) and distribution temperature sensor attached configuration, including the estimation results of its performances by load cycle test on 345kV single phase XLPE cable.

• 한국통신학회논문지
• /
• 제36권12B호
• /
• pp.1708-1721
• /
• 2011

최근 구제역과 같은 가축질병으로 인한 살 처분된 가축매몰지의 적절한 모니터링 시스템의 필요성이 대두되고 있다. 그러나 현재 사용되는 모니터링 시스템은 살 처분된 매몰지 현장에서의 시료를 채취한 후 1~2주간의 모니터링 기간을 필요로 함으로 실시간 감시가 필요로 하는 매몰지에 대한 연속측정이 불가능하다. 이에 본 논문에서는 이런 실시간 모니터링을 가능하게 하는 우선 센서네트워크 기반의 가축매몰지 환경정보 모니터링 시스템 설계 및 구현을 제안한다. 제안된 시스템의 무선 센서노드는 환경센서(Dust, Co2, NH3, H2s, Temperature, Humidity)와 위치확인을 위한 GPS센서로 구성된다. 제안된 시스템은 게이트웨이를 통해 원격지 서버에 전송된 매몰지 환경정보를 분석함으로 언제 어디에서나 유해환경 모니터링이 기능하고 위치확인을 통한 상황에 따른 능동적인 대응을 가능케한다. 따라서 제안된 시스템의 유효성 검증을 위해 규정된 가스 배출관에 센서를 설치하였고, 통합 모니터링이 가능한 테스트 베드에서 실시간으로 수신된 데이터를 수집, 분석하여 시간의 변화에 따른 매몰지 위치의 악취환경변화를 모니터링 하였다. 이를 통한 상황에 따른 실시간 대응을 함으로 유사시 환경오염의 사전예방이 가능 한 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.829-834
• /
• 2004

This research is to development advanced health(condition) monitoring system of superconducting motors. Development of advanced condition monitoring systems offers the prospect of improved performance, assessment, and operation, simplified design, enhanced safety, and reduced overall cost of advanced and next generation superconducting motor. For advanced and next generation superconducting motor design, the opportunity exists to develop and implement real-time and continuous monitoring systems by integrating wireless and computational technique. Generally, condition monitoring and control of temperature is essential for managing the superconducting motor components, rotor and structures. In this research, development of advanced monitoring in low temperature and high speed operating environments offers the potential to greatly improve the control of harsh environments. In conventional method, slip rings have been used to acquire data from these sensors. However, the increase of sensors leads to vibration of the rotation axis and noise signals due to kinematics contact. In this study, the wireless data acquisition technique was employed to develop more stable monitoring system adequate for high speed rotating system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.585-588
• /
• 2009

무선센서네트워크는 처리능력과 자원이 제한된 수많은 소형의 센서노드들로 구성된다. 따라서 무선센서네트워크에 있어서 가장 중요하고 기본적인 요소는 환경 정보를 수집하고 이를 사용자 응용시스템에 전송하는 센서노드 기술이다. 기술의 발전에 따라 센서노드는 점점 소형화 되고 지능화 되어 그 응용범위를 넓혀가고 있다. 특히 이식형 센서노드 기술은 인체나 가축의 체내에 이식되어 질병을 감시하고 치료하는데 사용됨으로써 무선센서네트워크의 미래 발전 방향을 제시한다. 본고에서는 가축의 체온을 실시간으로 감시할 수 있는 이식형 무선 센서노드를 설계하였다. 또한, 실시간 생체 감시 시스템 구현을 위한 추가적인 고려사항에 대하여 논하였다.

• 정보보호학회논문지
• /
• 제29권6호
• /
• pp.1403-1412
• /
• 2019

터빈, 배관 및 저장탱크와 같은 물리장치들의 경우 노후화뿐만 아니라 제어장치에 대한 사이버공격으로 인해 PLC(Programmable Logic Controller)와 같은 제어시스템의 보호 및 상태감시기능이 동작하지 않는 경우, 피해파급력이 크고, 가동 중지 시 그 비용 손실 또한 매우 크다. 가동 중인 물리장치의 작동을 중지하지 않고 간접적으로 상태감시를 함으로써 가용성을 유지하기 위한 방안으로써 온도, 가속도, 전류 등을 간접적으로 감지하고, 데이터들을 Influx DB에 저장하여 실시간으로 감시하는 시스템을 설계 및 구현한다. 실제 구현된 시스템으로부터 데이터를 얻고 이를 이용하여 이상상태를 감지할 수 있음을 검증하였다. 간접적 실시간 감시시스템의 범용화를 통해 데이터를 축적해 활용하면, 추가비용 없이 가동을 중지하지 않고 사용할 수 있을 뿐만 아니라 미리 고장을 예측하고 필요한 경우에만 조치를 취하는 고장예지기술, 이상상태를 이중으로 감시하는 신뢰도 높은 건전성 관리 기술을 통해 유지보수비용과 위험도를 대폭적으로 감소시키고, 보안위협에 대한 대비가 가능하다.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.242-249
• /
• 2019

Old people and patients with cardiovascular disease could die of a heart attack in the bath with heated water for a long time. Various researches have been studied to prevent these accidents from happening such as measuring the ECG signal when taking bath. However, these devices are hard to use and the higher price is not easily accepted by the public. In this paper, a low-cost and use-friendly, real time high precision water temperature monitoring device to prevent heart attack in the bath was developed. The device with waterproof design that lets the device can float on the surface of the water, and an accurate way to make water temperature measurement method was proposed by this paper that is immerging the sensor into water with 4cm depth to measure the temperature of underwater. The manufactured device was conducted to two experiments; one was to verify the basic functions of the device, and another one was for compare the proposed device with commercial products for monitoring the water temperature in the bathtub. As the experimental results shown, the proposed device has stable performance for the water temperature measurement and communicating with laptop in wireless.