• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1580-1588
• /
• 1999

This paper evaluates the real-time performance of the Train Communication Network (TCN) that consists of WTB and MVB. A run-time scheduling algorithm for the hard-real time communication was proposed and its performance was evaluated. Also, a new addressing method and the adaptive tree algorithm were suggested to enhance performance. The overall performance was evaluated by computer simulation using Arena.

• 한국콘텐츠학회논문지
• /
• 제17권10호
• /
• pp.1-8
• /
• 2017

최근 군용장비의 첨단화가 가속됨에 따라 장비의 성능을 실시간으로 검증하는 점검장비 역할이 중요해지고 있다. 대부분 점검장비가 개발 편의성, 개발기간 등을 고려해서 윈도우 기반으로 개발되었다. 하지만 윈도우 기반 점검장비가 실시간성을 제공하지 않아 이기종간의 데이터 통신에 대한 주기를 만족해주지 못하는 단점이 있으며, 이러한 문제를 해결하기 위해 고가의 상용 솔루션을 이용하여 윈도우 기반의 점검장비에 실시간성을 보장해주고 있다. 본 논문에서는 고가의 상용 솔루션을 대체하는 실시간 이식 커널인 RTiK-MP를 기반으로 하는 실시간 점검장비 소프트웨어를 설계하는 방법을 제시하며, 성능을 검증하기 위해 고속으로 통신하는 유도탄과 연동시험을 통해서 실시간성과 데이터 정확성을 측정하고 이를 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권11호
• /
• pp.21-27
• /
• 2019

임베디드 시스템에서는 서비스 특성에 따라 정해진 시간 내에 처리해야하는 하드 실시간 시스템과 처리 시간이 더 유연한 유연한 실시간 시스템을 분리해야합니다. 실시간을 동시에 수행하기 위해 운영 체제를 8BIT MCU와 같은 저 성능 임베디드 장치로 이식하는 것은 어렵습니다. RTOS (실시간 OS)를 사양이 낮은 MCU에 포팅하고 여러 작업을 수행 할 때 실시간 및 일반 처리 성능이 크게 저하되어 8BIT MCU와 같은 저 성능 MCU로 포팅 된 운영체제에 하드 실시간 시스템이 필요한 경우 성능 저하로 인해 하드웨어 및 소프트웨어를 다시 설계하는 문제가 발생되고 있습니다. 저성능 MCU에 이식 된 RTOS (저 성능 MCU로 포팅)에서 실시간 처리 시스템 요구 사항을 처리에 대하여 연구하고 프로세스 스케줄링에 대하여 연구가 진행되었습니다.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.84-91
• /
• 2005

In this paper, we describe the real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed from mathematic models, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer, and graphic user interface program resided in host computer. The real-time computer consists of six TIC-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to apply the real-time parallel processing simulator to performance analysis equipment of rolling missiles it is essential to perform the performance verification test of simulator.

• Journal of Computing Science and Engineering
• /
• 제9권2호
• /
• pp.51-72
• /
• 2015

Time predictability is crucial in hard real-time and safety-critical systems. Cache memories, while useful for improving the average-case memory performance, are not time predictable, especially when they are shared in multicore processors. To achieve time predictability while minimizing the impact on performance, this paper explores several time-predictable scratch-pad memory (SPM) based architectures for multicore processors. To support these architectures, we propose the dynamic memory objects allocation based partition, the static allocation based partition, and the static allocation based priority L2 SPM strategy to retain the characteristic of time predictability while attempting to maximize the performance and energy efficiency. The SPM based multicore architectural design and the related allocation methods thus form a comprehensive solution to hard real-time multicore based computing. Our experimental results indicate the strengths and weaknesses of each proposed architecture and the allocation method, which offers interesting on-chip memory design options to enable multicore platforms for hard real-time systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.375-378
• /
• 1996

Robot control software is a hard real-time system that must output the planned trajectory points within an explicit short time period. In this paper, we present a design and implementation method for robot control software using commercial real-time operating systems, RTKemel 4.5. Therefore, various robot motions, efficient user interface, and system failure check are easily implemented by using multitasking function, intertask communication mechanism, and real-time runtime libraries of RTKernel. The performance analysis of commercial real-time operating system for robot control is presented based on Timed Petri net(TPN) and we can use these results to design an optimal system.

• 전자공학회논문지CI
• /
• 제48권3호
• /
• pp.82-90
• /
• 2011

마이크로프로세서의 발전과 함께 멀티코어 시스템은 점차 보편화 되어가고 있다. 이러한 하드웨어 성능향상 패러다임의 변화로 인해 소프트웨어의 성능향상을 위해서는 기존의 싱글 스레드 어플리케이션들을 멀티 스레드 어플리케이션들로 교체하는 과정이 필수적이다. 멀티 스레드 어플리케이션 개발의 복잡성 때문에, 성능모니터링 도구는 어플리케이션의 성능 최적화를 지원하기에 유용한 도구로 사용된다. 기존의 성능모니터링 도구는 사용의 편의성이나 실시간성의 지원보다는 성능 측정 자체에 초점이 맞춰져 있다. 실시간 성능 모니터는 멀티 스레드 어플리케이션이 수행하는 동안 나타나는 문제점을 파악하는 것 뿐 아니라 실시간으로 어플리케이션의 동작 상태를 개발자가 확인 할 수 있기 때문에 단순한 성능 지표들만으로 문제점의 원인을 찾아내야하는 비 실시간 성능 모니터에 비해 효과적인 도구로 사용될 수 있다. 본 논문에서는 멀티코어 시스템을 위한 실시간 성능모니터링 도구인 RMPM(Real-time Multi-core Performance Monitor)를 제안하고 성능 측정 주기로 인한 오버헤드와 정확성 사이의 관계를 비교하여 최적의 측정 주기를 결정하였다. 제안한 성능모니터는 전체시스템의 CPU 사용량, 메모리 사용량, 네트워크 사용량 뿐아니라 시스템의 코어별, 어플리케이션의 스레드별 부하 분산상태를 나타낼 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권10호
• /
• pp.3361-3377
• /
• 2014

Synchronous computing models provided by real-time synchrony protocols, such as TTA [1] and PALS [2], greatly simplify the design, implementation, and verification of real-time distributed systems. However, their application to real systems has been limited since their assumptions on underlying systems are hard to satisfy. In particular, most previous real-time synchrony protocols hypothesize the existence of underlying fault tolerant real-time networks. This, however, might not be true in most soft real-time applications. In this paper, we propose a practical approach to a synchrony protocol, called Quality-Aware PALS (qPALS), which provides the benefits of a synchronous computing model in environments where no fault-tolerant real-time network is available. qPALS supports two flexible global synchronization protocols: one tailored for the performance and the other for the correctness of synchronization. Hence, applications can make a negotiation flexibly between performance and correctness. In qPALS, the Quality-of-Service (QoS) on synchronization and consistency is specified in a probabilistic manner, and the specified QoS is supported under dynamic and unpredictable network environments via a control-theoretic approach. Our simulation results show that qPALS supports highly reliable synchronization for critical events while still supporting the efficiency and performance even when the underlying network is not stable.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.273-281
• /
• 2022

In this paper, we propose a robot sound recognition system that detects various sound events. The proposed system is designed to detect various sound events in real-time by using a microphone on a robot. To get real-time performance, we use a VGG11 model which includes several convolutional neural networks with real-time normalization scheme. The VGG11 model is trained on augmented DB through 24 kinds of various environments (12 reverberation times and 2 signal to noise ratios). Additionally, based on random forest algorithm, a decision logic is also designed to generate event signals for robot applications. This logic can be used for specific classes of acoustic events with better performance than just using outputs of network model. With some experimental results, the performance of proposed sound recognition system is shown on real-time device for robots.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.23-33
• /
• 2003

The possibility of real time analysis about hot melt resins and pressure sensitive adhesives in newsprint stock was investigated by performing comparative tests using conventional image analysis method and real time contaminants analyzer. Based on the test results, the performance of real time contaminants analyzer in terms of detecting primary stickies in newsprint stock could be verified. Real time stickies analysis showed good precision and over-estimation of hot melt resins and under-estimation of pressure sensitive adhesives could be corrected by adapting new method. Real time analysis of primary stickies in the actual newsprint stock also showed good correlation with conventional image analysis and the performance of real time contaminants analyzer could be verified again. Adjustment of the contrast sensitivity of real time contaminants analyzer was enough to set the proper monitoring conditions for primary stickies in newsprint stock.