• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.669-673
• /
• 2007

In this study, real-time hybrid test using a shaking table for the control performance evaluation of a U-shaped TLCD controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a U-shaped TLCD adopted as an experimental part was installed to reduceits response. At first, the force that is acting between a TLCD and building structure is measured from the load cell attached on shaking table and is fed-back to the computer to control the motion of shaking table. Then, the shaking table is so driven that the error between the interface acceleration computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the shaking table. The control efficiency of the TLCD used in this paper is experimentally confirmed by implementing this process of shaking table experiment on real-time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2409-2421
• /
• 2011

본 논문에서는 지진하중에 의한 1경간 1층 강재골조구조에 대한 하이브리드 실험을 수행하였다. 오른쪽 기둥 1개소와 상부의 트러스요소 또는 보요소는 수치해석모형으로, 왼쪽기둥 1개소는 물리적 부분구조모형으로 선택하여 요소의 성능 및 거동을 평가하였다. 실험은 1자유도 또는 3자유도만을 고려하여 실시간으로 하이브리드 실험을 수행하였으며, 이를 위한 제어 알고리즘은 MATLAB/Simulink를 이용한 방법과 OpenSees, OpenFresco와 xPCTarget를 이용하는 방법으로 나누어 수행하였다. 그리고 수치해석모형과 물리적 부분구조모형의 실시간 데이터 통신을 위하여 SCRAMNet을 사용하였다. 파이버단면을 이용한 구조해석이 가능한 OpenSees를 사용하여 수치해석을 실시하였으며, 실시간 하이브리드 실험결과를 이와 비교하였다. 단순한 구조모형을 이용하여 제어시스템의 유효성을 검증하고자 실시간 하이브리드 실험이 실시되었으며, 추후 심각한 비선형성을 갖거나 복잡한 구조물의 하이브리드 실험으로 확장할 예정이다.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.281-291
• /
• 2019

In order to reflect complex and diverse building types, resident characteristics and disaster factors, it is necessary to introduce a flexible situation-based response system based on real-time information. Intelligent CCTV, hybrid sensor, location scanner, and customized broadcasting device were examined to introduce for the real-time response intelligent response system and its feasibility was verified through field test. In addition, based on the real-time information, the evacuation simulation was executed by assuming the dormitory building and the resident of the school, and the safety of the evacuation and the shortening of the pinnacle time were confirmed. The feasibility of real time information based evacuation comparing with the existing evacuation system were verified in the case of evacuation.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1005-1030
• /
• 2014

The need for assessing dynamic response of typical industrial piping systems subjected to seismic loading motivated the authors to apply model reduction techniques to experimental dynamic substructuring. Initially, a better insight into the dynamic response of the emulated system was provided by means of the principal component analysis. The clear understanding of reduction basis requirements paved the way for the implementation of a number of model reduction techniques aimed at extending the applicability range of the hybrid testing technique beyond its traditional scope. Therefore, several hybrid simulations were performed on a typical full-scale industrial piping system endowed with a number of critical components, like elbows, Tee joints and bolted flange joints, ranging from operational to collapse limit states. Then, the favourable performance of the L-Stable Real-Time compatible time integrator and an effective delay compensation method were also checked throughout the testing campaign. Finally, several aspects of the piping performance were commented and conclusions drawn.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2005년도 학술대회
• /
• pp.117-120
• /
• 2005

A Digital Broadcasting Satellite (DBS) receiver converts digital A/V streams received from a satellite to analog NTSC A,/V signals in real-time. Multi-tasking is an efficient way to improve the utilization of the processor core in real-time applications. In this paper, we propose a hybrid approach with a balanced trade-off between hardware kernel and multi-tasking programming to increase a system throughput. First, the schedulability of the critical hard real-time tass in the DBS receiver is verified by using a simple feasibility test. Then. several soft real-time tasks are thoughtfully programmed to satisfy functional requirements of the system.

• 방송공학회논문지
• /
• 제12권1호
• /
• pp.53-60
• /
• 2007

Digital Broadcasting Satellite (DBS) 수신기는 실시간으로 위성으로부터 수신되는 방송신호를 실시간으로 NTSC A/W 스트림으로 변환하는 기능을 수행한다. 따라서 Multi-tasking 방식은 실시간 응용시스템에서 프로세서의 효율적인 사용에 매우 효과적인 방법이다. 본 논문에서는 H/W, S/W micro kernel을 이용한 hybrid approach를 통하여 H/W micro kernel과 multi-tasking programming과의 관계를 적절히 조절하여 시스템의 처리속도를 증가시켰다. 또한 DBS수신기에서의 실시간 처리를 위해 각각의 프로세스들간의 스케줄 적정성을 확보하기 위해 시스템의 요구사항이 만족되도록 개발된 critical hard real-time task들에 대한 스케줄 적정성을 먼저 평가하고, 그 밖의 soft real-time task 들에 대한 스케줄링 가능성에 대한 평가를 진행하여 전체적으로 실시간 처리에 문제가 발생하지 않도록 embedded 소프트웨어를 개발하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.189-194
• /
• 2007

An experimental real-time hybrid method, which implements the wind response control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure, which is subjected to the excitations of the measured interface control force at its top story and an wind-load input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.485-495
• /
• 2008

An experimental real-time hybrid method, which implements the vibration control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure, which is subjected to the excitations of the measured interface control force at its top story and sinusoidal waves input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD.

• Smart Structures and Systems
• /
• 제31권5호
• /
• pp.437-454
• /
• 2023

Real-time hybrid simulation (RTHS), which has the advantages of a substructure pseudo-dynamic test, is widely used to investigate the rate-dependent mechanical response of structures under earthquake excitation. However, time delay in RTHS can cause inaccurate results and experimental instabilities. Thus, this study proposes a model-based adaptive control strategy using a Kalman filter (KF) to minimize the time delay and improve RTHS stability and accuracy. In this method, the adaptive control strategy consists of three parts-a feedforward controller based on the discrete inverse model of a servohydraulic actuator and physical specimen, a parameter estimator using the KF, and a feedback controller. The KF with the feedforward controller can significantly reduce the variable time delay due to its fast convergence and high sensitivity to the error between the desired displacement and the measured one. The feedback control can remedy the residual time delay and minimize the method's dependence on the inverse model, thereby improving the robustness of the proposed control method. The tracking performance and parametric studies are conducted using the benchmark problem in RTHS. The results reveal that better tracking performance can be obtained, and the KF's initial settings have limited influence on the proposed strategy. Virtual RTHSs are conducted with linear and nonlinear physical substructures, respectively, and the results indicate brilliant tracking performance and superb robustness of the proposed method.