• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.18-27
• /
• 2013

Real-time monitoring is one of the prime necessities in a weapon flight test that is required for the efficient and timely collection of large amounts of high-rate sampled data acquired by an event-trigger. The wireless sensor network is a good candidate to resolve this requirement, especially considering the inhospitable environment of a weapon flight test. In this paper, we propose a priority based multi-channel MAC protocol with CSMA/CA over a single radio for a real-time monitoring of a weapon flight test. Multi-channel transmissions of nodes can improve the network performance in wireless sensor networks. Our proposed MAC protocol has two operation modes: Normal mode and Priority Mode. In the normal mode, the node exploits the normal CSMA/CA mechanism. In the priority mode, the node has one of three grades - Class A, B, and C. The node uses a different CSMA/CA mechanism according to its grade that is determined by a signal level. High grade nodes can exploit more channels and lower backoff exponents than low ones, which allow high grade nodes to obtain more transmission opportunities. In addition, it can guarantee successful transmission of important data generated by high grade nodes. Simulation results show that the proposed MAC exhibits excellent performance in an event-triggered real-time application.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.403-408
• /
• 2020

Photovoltaic (PV) has both intermittent and uncertainty in nature, so it is difficult to accurately predict. Thus anomaly detection technology is important to diagnose real time PV generation. This paper identifies a correlation between various parameters and classifies the PV data applying k-nearest neighbor and dynamic time warpping. Results for the two classifications showed that an outlier detection by a fault of some facilities, and a temporary power loss by partial shading and overall shading occurring during the short period. Based on 100kW plant data, machine learning analysis and test results verified actual outliers and candidates of outlier.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.83-86
• /
• 2015

In this paper, we propose a real-tim measurement management system UI development linked the Water treatment facilities broadband Convergence Network. The sensor and the image data received by the server develop a program to interact with Web through water treatment facilities broadband convergence network. So, Separately develop UI capable of independently operating. Building a web server for remote monitoring of the transmission sensor and the image data. And Monitoring and control is possible the sensor data and image data through the Web-based UI. We can grasp the current state such as measurement time, concentration and depth of interface through the proposed real-time measurement management system UI development liked the water treatment facilities broadband convergence network. So, we can check in whether the normal operation of water treatment facilities and whether the casualties such as fire and security. As well as real time to see the information at a glance due to UI development can be raal-time monitoring of real-time measurement management system.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.111-116
• /
• 2013

Because LEO (Low Earth Orbit) satellite has very limited contact time between satellite and ground station, all telemetry data generated on satellite are stored in a mass memory and transmitted to the ground during the contact time. There are two downlink modes, real-time mode and playback mode. Only real-time data frames are transmitted to the ground in real-time mode, real-time and playback data frames stored into mass memory are transmitted to the ground in playback mode. In accordance with the data transmission rate, there are two downlink rates, low downlink rate and high downlink rate. This paper briefly introduces downlink interfaces and flight software of a LEO satellite developed in KARI. And it presents the telemetry storage method, real-time and playback downlink management method, and downlink channel and rate control method.

• MALSORI
• /
• no.65
• /
• pp.143-152
• /
• 2008

This paper focuses on the real time implementation of an adaptive multi-rate (AMR) speech codec, that is a standard speech codec of IMT-2000, using the TMS320VC5510. The series of TMS320VC55x is a 16-bit fixed-point digital signal processor (DSP) having low power consumption for the use of mobile communications by Texas Instruments (TI) corporation. After we analyze the AMR algorithm and source code as well as the structure and I/O of 7MS320VC55x, we carry out optimizing the programs for real time implementation. The implemented AMR speech codec uses 55.2 kbyte for the program memory and 98.3 kbyte for the data memory, and it requires 709,878 clocks, i.e. about 3.5 ms, for processing a frame of 20 ms speech signal.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1447-1450
• /
• 2002

In this paper, we propose a new access method named UR (Use. Relay) scheme to improve the channel efficiency in mobile communications. In UR scheme, packets of a data terminal that do not demand real time communications are relayed by other terminals during their inactive periods, which ue communicating with the base station through a fixed channel at that time. Simulation results show that with UR scheme, the blocking probability md the throughput are improved considerably with an allowable increase in the average delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.90-98
• /
• 2003

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial communications. More specifically, this paper presents an analytical and experimental performance evaluation of the switched Ethernet and a case study about networked control system.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.84-94
• /
• 2008

Displacement estimation is a crucial step in ultrasonic strain imaging. The displacement between a pre- and postcompression signal in the current data window is estimated by first shifting the postcompression signal by the displacement obtained in the previous data window to reduce their decorrelation and then determining the remaining part of the displacement through autocorrelation and conversion of phase difference into time delay. However, since strain image quality tends to vary with the amount of compression applied, we propose two new methods for enhancing strain image quality, i.e., displacement normalization and adaptive persistence. Both in vitro and in vivo experiments are carried out to acquire ultrasound data and produce strain images in real time under the application of quasi static compression. The experimental results demonstrate that the methods are quite effective in improving strain image quality and thus can be applied to implementing an ultrasound elasticity imaging system that operates in real time.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.65-71
• /
• 2005

The main obstacles for adopting a mobile health information system to existing hospital information system are the redundancy of clinical data and the additional workload for implementing the new system. To obtain a seamless communication and to reduce the workload of implementation, an easy and simple implementation strategy is required. We propose a mobile clinical information system (MobileMed) which is specially designed for the easy implementation. The key elements of MobileMed are a smart interface, an HL7 message server, a central clinical database (CCDB), and a web server. The smart interface module transfers the key information to the HL7 message server as new clinical tests data is recorded in the existing laboratory information system. The HL7 message server generates the HL7 messages and sends them to the CCDS. As a central database the CCDS collects the HL7 messages and presents them to the various mobile devices such as PDA. Through this study we might conclude that the architecture for the mobile system will be efficient for real-time data communication, and the specially designed interface will be an easy tool for implementing the mobile clinical information system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.641-649
• /
• 2004

We propose a dynamic traffic management model which uses adaptive priority reassignment algorithm to deliver service differentiation in home networks, and implement adaptive priority reassignment algorithm using FPGA. The proposed architecture is designed to handle home network traffic without the need for signaling protocol. We categorize home network traffic into three kinds of traffic class: control data traffic class, the Internet data and non-real-time data traffic class, and multimedia data traffic class (include non-real-time and real-time multimedia data traffic). To support differential service about these kinds of traffic class, we designed and implemented a traffic management framework that dynamically change each traffic class priority depending on bandwidth utilization of each traffic class.