• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권4호
• /
• pp.305-312
• /
• 2014

This paper discusses real-time peak shaving algorithms for a large-scale battery energy storage system (BESS). Although several transmission and distribution functions could be implemented for diverse purposes in BESS applications, this paper focuses on a real-time peak shaving algorithm for an energy time shift, considering wind power generation. In a high wind penetration environment, the effective load levels obtained by subtracting the wind generation from the load time series at each long-term cycle time unit are needed for efficient peak shaving. However, errors can exist in the forecast load and wind generation levels, and the real-time peak shaving operation might require a method for wind generation that includes comparatively large forecasting errors. To effectively deal with the errors of wind generation forecasting, this paper proposes a real-time peak shaving algorithm for threshold value-based peak shaving that considers fuzzy wind power generation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.414-414
• /
• 2000

This paper presents a method for building a real-time kernel of autonomous mobile robot control systems. Until now, most of robots have their own operation softwares dedicated only for their use. Sometimes, operation softwares were developed based on MS-DOS or other real -time kernel based on UNIX. However, MS-DOS has many restrictions for use as a robot operation system. Also, mix based real-time kernel has some Limitations for use with mobile robots. So, in this paper, we focus on building a real-time kernel based on Linux. The in this paper, the software modules of Task Management, Memory Management, Intertask Communication, and Synchronization are redesigned. To show the efficiency of the paper, it was applied to run Nomad Super Scout II avoiding obstacles detected by sonar sensor array.

• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.622-629
• /
• 1999

This paper discusses a real time multi-tasking system model and a development environment for an elevator control system. Recently, as the elevator systems become large-scaled and operate with high speed, there are lots of software tasks to be processed with time constraints. Thus, the control systems are designed with distributed control structure and characteristics of typical real time systems. For stuructural design of such real time system, we introduce a multi-tasking model based on a real time operating system model and an software development environment based on virtual protopyping which simulates real system operation in the cross development of a new elevator system with distributed control structure and its system reliability can be verified through numerous field tests.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.458-458
• /
• 2000

Quick evaluations of two in-plane orbit maneuvers using small see of real-time CPS navigation solutions were peformed lot the KOMPSAT-1 spacecraft operation. Real-time GPS navigation solutions of the KOMPSAT-1 were collected during the Korean Ground Station(KGS) pass. Only a few sets of position and velocity data after completion of the thruster firing were used for the quick maneuver evaluations. The results were used for antenna pointing data predictions for the next station contact. Normal orbit maneuver evaluations using large see of playback GPS navigation solutions were also performed and the result were compared with the quick evaluation results.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권12호
• /
• pp.630-640
• /
• 2007

센서 네트워크의 응용 범위가 점차 넓어지면서 군사 분야나 방사능 감지와 같이 실시간성을 요구하는 응용분야가 생겨나게 되었다. 하지만 기존의 센서 운영체제 연구는 효율적인 자원 활용에 초점을 두고 연구가 진행되었기 때문에 실시간성을 만족시켜 주기 어려운 구조를 가지고 있다. 본 논문에서는 정시성을 보장하는 실시간 분산 객체 TMO 모델을 센서 네트워크의 제한된 자원 환경에 알맞도록 경량화 시킨 ${\mu}TMO$ 모델을 제안한다. ${\mu}TMO$ 모델을 이용한 실시간 센서 네트워크 운영체제를 개발하기 위하여 한국전자통신연구원에서 개발한 센서 노드용 운영체제인 Nano-Q+를 이용하였다. Nano-Q+의 타이머 모듈을 높은 해상도를 가질 수 있도록 수정하였으며, EDF(Earliest-Deadline-First)기반의 실시간 스케줄러에 CST(Context Switch Threshold)와 PAS(Power Aware Scheduling) 기법을 적용하여 센서 노드에 적합한 실시간 스케줄러로 변경하였다. ${\mu}TMO$ 모델을 지원하기 위해 채널 기반의 통신 수단인 ITC-Channel을 새롭게 구현하였으며, 주기적인 스레드를 관리하는 WTMT(Watchdog TMO Management Task) 모듈을 구현하여 SpM 스레드를 주기에 맞게 실행할 수 있도록 하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.735-738
• /
• 1998

To develop an effective virtual prototyping methodology for the PLC(Programmable Logic Controller) based real-time systems, a conversion algorithm from RLL(Relay Ladder Logic) to statechart is presented in this paper. The RLL is the main programming language to represent the operation of the PLC, and the statechart is the most widely used tool in the field of virtual prototyping in order to represent the behaviour of real-time systems. A virtual prototyping for an example case is implemened to evaluate the benefit of the proposed algorithm.

• 산업공학
• /
• 제17권2호
• /
• pp.233-241
• /
• 2004

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types of effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and AGV)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1028-1031
• /
• 1996

Dynamic scheduling is very important in constructing CIM and improving productivity of chemical processing systems. Computation at the scheduling level requires mostly a long time to generate an optimal schedule, so it is difficult to immediately respond to actual process events in real-time. To solve these problems, we developed dynamic scheduling algorithms such as DSMM(Dynamic Shift Modification Method), PUOM(Parallel Unit Operation Method) and UVVM(Unit Validity Verification Method). Their main functions are to minimize the effects of unexpected disturbances such as process time variations and unit failure, to predict a makespan of the updated dynamic schedule and to modify schedule desirably in real-time responding to process time variations. As a result, the algorithms generate a new pertinent schedule in real-time which is close to the original schedule but provides an efficient way of responding to the variation of process environment. Examples in a shampoo production batch process illustrate the efficiency of the algorithms.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1259-1265
• /
• 2014

In this paper, the real-time attitude determination based Matlab using low-cost receivers was designed and evaluated. The GNSS attitude determination system was implemented to operation in real-time by TimerCallback in MATLAB. The TTM(Transmission Time Misalignment) of U-blox receiver was confirmed through zero baseline tests and this problem was revised. The computed attitude by the high-cost NovAtel receiver was compared to the computed attitude by the low-cost U-blox receiver. As a result of this, the performance of attitude determination systems by low-cost receiver was confirmed. To determine baseline, LAMBDA and BC-LAMBDA for integer ambiguities search methods were used. To confirm suitable integer ambiguity search method in real-time attitude determination algorithm, determined baselines by two methods were compared, and it was confirmed that BC-LAMBDA is more suitable. As a result of this, the operation of real-time attitude determination system was confirmed using 3 low-cost receivers.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.649-659
• /
• 2013

Real time control (RTC) can be broadly defined as a system that dynamically adjusts the operation of facilities in response to online measurements in the field to maintain and meet the operational objectives, both during dry and wet weather conditions. RTC adds a dynamic component that is actively adjusted in real time based on system conditions. In terms of reducing or eliminating sewer flooding, CSOs and/or managing flows, implementation of RTC has various benefits to sewer system operation. It has been emerging as an attractive approach, but related elements (such as framework for the application, its components and equipments, aspects to be considered) towards its application on sewer systems have not been throughly introduced so far. The main goal of this study is to review several applications of RTC and firm guidelines published abroad, and finally to provide a framework for the proper application of RTC on sewer systems.