• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.543-552
• /
• 1996

The goal of this paper is to developed a DSP based power analyzing and control system by 3-Dimensional (3-D) space current co-ordinates. A developed system is made up of 486-PC and DSP (Digital Signal Processor) board, Active Power Filter, Non-linear thyristor load, and Power analyzing and control program for Windows. Power is analyzed using signal processing techniques based on the correlation between voltage and current waveforms. Since power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm, flexibility of the proposed system which has both power analysis mode and control mode, is greatly enhanced. Non-active power generated while speed of induction motor is controlled by modulating firing angle of thyristor converter, is compensated by Active Power Filter for verifying a developed system. Power analysis results, before/after compensation, are numerically obtained and evaluated. From these results, various graphic screens for time/frequency/3-D current co-ordinate system are displayed on PC. By real-time analysis of power using a developed system, power quality is evaluated, and compared with that of conventional current co-ordinate system. (author). refs., figs. tabs.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3193-3199
• /
• 2009

본 실시간 지능형 홈 네트워크 제어시스템은 여러 모바일 기기를 이용하여 통신이 가능한 곳이면 언제 어디서든지 실시간으로 시스템 제어와 모니터링이 가능한 시스템이다. 본 논문은 실시간 지능형 홈 네트워크 제어시스템을 구현하기 위하여 무선 홈 네트워크 기술 중 ZigBee 기술을 이용하여 각종 USN 센서를 제어하는 서버 모듈 구현과 모바일 기기에 탑재되어 사용자에 의해 구동되는 클라이언트 모듈을 GUI환경으로 구성하여 설계 및 구현하였다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1314-1319
• /
• 2010

The excitation control system of an emergency diesel generator is classified as a kind of safety-related system. Compared with other control systems in a power plant, this system is required to be more reliable and have better performance. KEPCO Research Institute successfully developed the excitation control system for a diesel generator. This paper presents its field test results by using a real time simulator on a nuclear power plant.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.13-25
• /
• 2000

A simulation model is developed to analyze the large-structure driving system and its integrated behavior in the whole weapon system. It models every component in the driving system such as mechanical and electrical characteristics, and it is programmed by simulation language in a way which strongly reflects the system's real time dynamics and reduces computation time as well. A useful parameter identification method is proposed, and it is tuned on the given physical system. The model is validated through comparing to real test, and it is applied to analysis and prediction of integrated system functions relating to the fire control system.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.734-743
• /
• 1999

In this paper, a real-time communication method using a PICNET-NP(Plant instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS(Distributed Control System) in nuclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others. In addition, the method was used to analyze the data characteristics of the DCS in existing nuclear power plant. The result shows that use of this method meets the response time requirement(100ms).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1324-1327
• /
• 1996

This paper presents an open architecture controller (OAC) for machining systems and describes the OAC testbed at Seoul National University. Because our OAC is designed for fully open systems, it does not depend on any specific hardware or software components. This openness includes software reusability which enables integration of a wide range of monitoring and control features. In addition to openness, our OAC system provides guaranteed real-time performance, an important requirement for advanced manufacturing.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.105-114
• /
• 1999

By using the conceptual impedance and the elasticity of a serial chain of spring-damper system, a real-time collision-free trajectory generation algorithm is proposed. The reference points on a trajectory connected by the spring-damper system have a mechanism for self-Position adjustment to avoid a collision by the impedance, and the local adjustment of each reference point is propagated through the elasticity to a real robot at the end of the spring-damper system. As a result, the overall trajectory consisting of the reference points becomes free of collision with environmental obstacles and efficient having the shortest distance as possible. In this process, the reference points connected by the spring-damper system take role of virtual robot as global guidance for a real robot, and a cooperative optimization is carried out by the system of virtual robots. A control algorithm is proposed to implement the impedance for a car-like mobile robot.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.166-171
• /
• 2003

This paper presents the algorithms and Matlab Toolbox for co-simulation of distributed real-time control system based on OSEK-OS and CAN protocol. This toolbox enables the developers to analyze the timing uncertainty, which is caused by resource sharing including shared memories and networks, and to take the timing uncertainty into consideration in the early design phase. Furthermore, this toolbox helps the developers to model the behaviors of a control system by providing graphical user interface for objects of OSEK-OS and CAN. To prove the feasibility of this toolbox, a vehicle body network system is modeled with this toolbox, and the timing uncertainties are analyzed.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.171-171
• /
• 2000

We have developed m innovative surface inspection system for automated quality control for steel products in POSCO. We had ever installed the various kinds of surface inspection systems, such as a linear CCD and a laser typed surface inspection systems at cold rolled strips production lines. But, these systems cannot fulfill the sufficient detection and classification rate, and real time processing performance. In order to increase detection and classification rate, we have used the Dark, Bright and Transition Field illumination and area type CCD camera, and fur the real time image processing, parallel computing has been used. In this paper, we introduced the automatic surface inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms and its performance obtained at the production line.