• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.277-285
• /
• 2002

This paper proposes and analyzes an error control scheme for the transmission control based real-time communication, such as FDDI, TDMA, and wireless LAN, which delivers the message according to the round robin fashion after the off-line bandwidth allocation. Taking into account the time constraint of each message, the proposed error control scheme makes the receiver transmit the error report via asynchronous traffic while the sender resend the requested message via overallocated access time which is inevitably introduced by the bandwidth allocation procedure for hard real -time guarantee. The error control procedure does not interfere other real -time message transmissions. In addition, as each frame contains the size of the message it belongs, the receiver can recognize the end of completion of message transmission. This enables earlier error report to the receiver so that the sender can cope with more network errors. The analysis results along with simulation performed via SMPL show that the proposed scheme is able to enhance the deadline meet ratio of messages by overcoming the network errors. Using the proposed error control scheme, the hard real -time network can be built at cost lower than, but performance comparable to the expensive dual link network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.728-735
• /
• 2013

In this paper, we present a method of transmitting ECG signals in real-time mobile environment to be possible to implement the ubiquitous healthcare system. Because of the excessive amount of data transmission of ECG signals, it is necessary to propose a limitation to the real-time transmission. We propose a real-time electrocardiographic monitoring system based on the proposal of unusual waveform detection algorithm which detects the R-wave distortions from the arrhythmia ECG signals having unusual waveform of about 10% on average. It is very effective in terms of time and cost for medical staffs to monitor and analyze ECG signals for a long period of time. Monitoring unusual waveform by gradually adjusting the threshold values of potential and kurtosis makes the amount of data transmitted decrease and significance level of waveform to be enhanced. The unusual waveform detection algorithm is implemented with ubiquitous environment inter-working device client. It is applicable to ubiquitous healthcare system capable of real-time monitoring the ECG signal. While ensuring the mobility, it allows for real-time continuous monitoring of ECG signals.

• Journal of Korea Multimedia Society
• /
• v.19 no.1
• /
• pp.10-21
• /
• 2016

Images taken from outdoor are degraded quality by fog or haze, etc. In this paper, we propose a method that provides the visibility improved images through fog or haze removal. We proposed haze removal method that uses brightness transform based on atmospheric scatter coefficient rate with local histogram equalization. To calculate the transmission rate that indicate fog rate in original image, we use atmospheric scatter coefficient rate based on quadratic equations about haze model. And primary brightness transformed image can be obtained by using the obtained transmission rate. Also we use local histogram equalization with proposed brightness transform for effectively image visibility enhancement. Unlike existing methods, our method can process real-time with stable and effect image visibility enhancement. Proposed method use only the luminance images processed by good performance surveillance systems because it represents the real-time processing is required, black-box, digital camera and multimedia equipment is applicable. Also because it shows good performance only with the luminance images processed, Surveillance systems, black boxes, digital cameras, and multimedia devices etc, that require real-time processing can be applied.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.29-37
• /
• 2013

This study intended to introduce the method of designing an eco-friendly building based on BIM(Building Information Modeling) and BIM-based application. The proposed application aimed to generate the environmental performance of the designed alternative automatically in real-time manner in the process of architectural design. We focused on the feasibility of BIM-based eco-friendly design process and the applicability of the developed application for the architectural design practice. In this manner, in the end of paper, we proposed the so-call EcoBIM which is the performance evaluation module for the designed alternative using BIM in the real-time manner and the new design process with it. EcoBIM generate the coefficient of overall heat transmission of wall, roof and slab of the designed alternative with their physical characteristics such as thickness, thermal resistance and so on.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.136-144
• /
• 2021

The purpose of this study was to develop and verify a precision transmission error measurement system for a gear pair. The transmission error measurement system of the gear pair was developed as a measurement unit, signal processing unit, and signal analysis unit. The angular displacement for calculating the transmission error of the gear pair was measured using an encoder. The signal amplification, interpolation, and transmission error calculation of the measured angular displacement were conducted using a field-programmable gate array (FPGA) and a real-time processor. A high-pass filter (HPF) was applied to the calculated transmission error from the real-time processor. The transmission error measurement test was conducted using a gearbox, including the master gear pair. The same test was repeated three times in the clockwise and counterclockwise directions, respectively, according to the load conditions (0 - 200 N·m). The results of the gear transmission error tests showed similar tendencies, thereby confirming the stability of the system. The measured transmission error was verified by comparing it with the transmission error analyzed using commercial software. The verification showed a slight difference in the transmission error between the methods. In a future study, the measurement and analysis method of the developed precision transmission error measurement system in this study may possibly be used for gear design.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.281-284
• /
• 2004

This paper presents the design and implementation of a QoS based enhanced collaboration system in MDO. This is an efficient distributed communication tool between designers. It supports text communication, audio/video communication, file transfer and XML data sending/receiving. Specially, this system supports a dynamic QoS self-adaptation by using the improved direct adjustment algorithm (DAA+). The original direct adjustment algorithm adjusts the transmission rate according to the congestion level of the network, based on the end to end real time transport protocol (RTP), and controls the transmission rate by using the information of loss ratio in real time transport control protocol (RTCP). But the direct adjustment algorithm does not consider when the RTCP packets are lost. We suggest an improved direct adjustment algorithm to solve this problem. We apply our improved direct adjustment algorithm to our of QoS (Quality of Service) [1] based collaboration system and show the improved performance of transmission rate and loss ratio.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1387-1392
• /
• 2012

These days people use a lot of electric power, because industry advancement and a standard of living is elevated. So voltage stability analysis and control problems are very important in these days. U.S.A has already developed voltage stability analysis program, and use it on power transmission scheme such as generator overhaul, transmission line off and so on. So voltage stability analysis is more and more interested in Korea, too. In this paper, we introduce a standard theory of voltage stability analysis and real time voltage stability analysis program that use sPMU(Satellite Phasor Measurement Unit). And we also introduce the calculation result about voltage stability in Jeju power transmission system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.68-73
• /
• 2017

In this study, we design a low-cost test equipment for real-time image observation and transmission/reception distance test using 1m by 1.5m bang-pai kite. The image observation is made by using two servo motors to enable the camera to control the two axis attitude. The image observation equipment is hung on the string of a kite and the test is performed to observe the real time image. The transmission and reception distance test of the wireless RF transceiver module is conducted on the ground and in the air.

• International Journal of Advanced Culture Technology
• /
• v.4 no.4
• /
• pp.1-5
• /
• 2016

In this paper, we present the study on the proposed design of a real-time transmission of a video from the drone to broadcasting station (OBVan) by using F8L10D-N LoRa Module. Nowadays, LoRa technology is proved to be the mass of low cost, long range machine-to-machine connectivity. Particularly in the field of broadcasting and communication system, F8L10D-N LoRa RF Module spread spectrum technology with long transmission distance and strong penetrative ability that is double stronger than traditional FSK as well as PSK modulation scheme.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.07a
• /
• pp.121-125
• /
• 2003

In this paper, we propose a framework of Transmission Control Protocol with Software Rejuvenation methodology, which is applicable for network system survivability. This method is utilized to improve the survivability because it can limit the damage caused by successful attacks. The main objectives are to detect intrusions in real time, to characterize attacks, and to survive in face of attacks. To counter act the attacks' attempts or intrusions, we perform the Software Rejuvenation methods such as killing the intruders' processes in their tracks, halting abuse before it happens, shutting down unauthorized connection, and responding and restarting in real time. These slogans will really frustrate and deter the attacks, as the attacker can't make their progress. This is the way of survivability to maximize the deterrence against an attack in the target environment. We address a framework to model and analyze the critical intrusion tolerance problems ahead of intrusion detection on Transmission Control Protocol (TCP).