• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1559-1567
• /
• 2015

This study investigated the association between $PM_{2.5}$ concentrations obtained with portable real-time monitors and those obtained with gravimetric methods in national urban air-quality monitoring sites in Seoul, South Korea. We used the SidePak AM510 Personal Aerosol Monitor (TSI Inc., 500 Cardigan Road Shoreview, MN) and DustTrak DRX 8533 (TSI Inc., 500 Cardigan Road Shoreview, MN) as portable real-time monitors for measuring $PM_{2.5}$ concentrations and compared these values with those measured with the PMS-103 or SEQ 47/50 models operated by Federal Reference Method (FRM) or the European Committee for Standardization(ECS), respectively, in national urban air-quality monitoring sites in Seoul. Measurements were conducted every other day in the winter and spring seasons of 2014. The estimated daily mean concentrations of $PM_{2.5}$ ranged between 13.4 and $161.9{\mu}g/m^3$ using AM 510 and between 22.0 and $156.0{\mu}g/m^3$ using DustTrak. The Spearman correlation coefficient for $PM_{2.5}$ concentrations between AM 510 and gravimetric results was 0.99, and the correlation between DustTrak and gravimetric results was 0.87. The correction factor suggested was 0.42 and 0.29 for AM 510 and DustTrak, respectively. We found that $PM_{2.5}$ concentrations measured with real-time monitors could overestimate true $PM_{2.5}$ concentrations and therefore the application of a correction factor (0.43) is strongly suggested for quantification when Real-time monitors were operated of $PM_{2.5}$ levels at urban atmospheric environment of South Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1316-1319
• /
• 1996

This paper proposes the algorithm for the correction of a position and orientation of small object such as chip in the precise construction process. In the past, it is general to correct position and orientation of object using human sight and simple vision sensors. But recently, researches using image processing devices have been studied to improve the corrective precision of a position and orientation of object. In this piper, maximum-axis moment and p-theta algorithm are used to correct the position and orientation. Algorithm of maximum-axis moment is widely applied to hetero-object except being applied to a perfect rectangle. This is reason that moments of the X and Y-axis are equal. Therefore, being the shape of a perfect rectangle, the object is applied to other algorithm. In the light of time problem, real-time control is as important as correction of object. To solve it, we use the DSP(Digital Signal Processing) which is far more fast than PC.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.201-214
• /
• 2020

This study proposes a bias correction method of dual-pol radar rain rate in real time using the dual Kalman filter. Unlike the conventional Kalman filter, the dual Kalman filter predicts state variables with two systems (state estimation system and model estimation system) at the same time. Bias of rain rate is corrected by applying the bias correction ratio to the rain rate estimate. The bias correction ratio is predicted from the state-space model of the dual Kalman filter. This method is applied to a storm event with long duration occurred in July 2016. Most of the bias correction ratios are estimated between 1 and 2, which indicates that the radar rain rate is underestimated than the ground rain rate. The AR (1) model is found to be appropriate for explaining the time series of the bias correction ratio. The time series of the bias correction ratio predicted by the dual Kalman filter shows a similar tendency to that of observation data. As the variability of the bias correction increases, the dual Kalman filter has better prediction performance than the Kalman filter. This study shows that the dual Kalman filter can be applied to the bias correction of radar rain rate, especially for long and heavy storm events.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.300-312
• /
• 2009

An indoor location-based service cannot be realized unless the indoor positioning problem is solved. However, the cost-effective indoor positioning systems are suffering from their inaccurateness. This paper proposes a map information-based correction method for the indoor positioning systems. Using our Kalman filter with map information-based appropriate parameter values, our method estimates the track of the moving object, then it performs the Frechet Distance-based map matching on the obtained track. After that it applies our real time correction method. In order to verify efficiency of our method, we also provide our test results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1214-1219
• /
• 2009

Many studies are being applied for various parts of USN (Ubiquitous Sensor Network) technology. The world's large retail stores and warehouses that apply logistic management are also studied. With this, USN technology is increasing in its utilization. However, to handle and process real-time data will never be never easy if these huge warehouses are using too many sensors, and real-time data correction is almost impossible. Software implementation and high-speed hardware are insufficient to solve these complex problems. To solve this problem, a key solution is to implement high-speed software. Hence, this paper suggests a USN logistics management system that applies pipelining techniques for efficiency in real-time data correction and reduces errors of generated values.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.269-275
• /
• 2022

In ideal configuration, elapsed-time method can measure the exact reaction wheel speed. But in real configuration, the speed measurement error exists due to tacho pulse non-uniformity. In this research, we study the method which overcome the non-uniformity effects. First, we introduce the method which spin the wheel at the specific speed and measure the non-uniformity. Then, we propose the real-time measurement error correction method which uses the obtained non-uniformity information. This method calculate the speed candidates from the elapsed-time method's counts and non-uniformity information, and choose the closest speed to the real speed. Through simulation, we show that proposed method measure the exact speed regardless of non-uniformity, and fast wheel speed control is possible.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.4 no.2
• /
• pp.369-378
• /
• 2014

The Reed-Muller code is one of the efficient algorithms for multiple bit error correction, however, its high-computation requirement inherent in the decoding process prohibits its use in practical applications. To solve this problem, this paper proposes a graphics processing unit (GPU)-based parallel error control approach using Reed-Muller R(r, m) coding for real-time wireless communication systems. GPU offers a high-throughput parallel computing platform that can achieve the desired high-performance decoding by exploiting massive parallelism inherent in the algorithm. In addition, we compare the performance of the GPU-based approach with the equivalent sequential approach that runs on the traditional CPU. The experimental results indicate that the proposed GPU-based approach exceedingly outperforms the sequential approach in terms of execution time, yielding over 70× speedup.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2116-2120
• /
• 2007

A realization for image distortion correction processing system with DSP processor is presented in this paper. The image distortion correcting algorithm is realized by DSP processor for focusing on more real time processing than image quality. The lens and camera distortion coefficients are processed by the Lookup Tables and the correcting algorithm is applied to reverse mapping method for geometrical transform. The system experimentation results in the processing time about 31.3 msec $720{\times}480$ wide range image, and the image is stable and spontaneous to be about 8.3% average PSNR variation with changing a wide angle.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.39-44
• /
• 2012

This paper propose a transmission method for "Transportation system" that can decide precise position under wide area road traffic environment. For precise position detecting, central station collect multiple receiver station's satellite navigation data and generate correction information. In this process, we need efficient real time transmission method for satellite navigation message that has variable data size. We propose real time data transmission method. This real time transmission method offer efficient processing structure for multiple receiver station's satellite navigation message. This paper explains proposed real time transmission method and proofs this transmission method.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1682-1692
• /
• 2021

Digital Twin, one of the core technologies of the Fourth Industrial Revolution, is attracting attention as a very suitable technology for disaster monitoring such as fires and earthquakes. In this paper, we implement a system equipped with UWB RTLS(Ultra-Wideband Real Time Location System), real-time remote control, and video streaming, which are element technologies for disaster monitoring digital twin. Since the proposed system structure is based on a cloud server, the actual location of the UWB indoor positioning-based client is transmitted to the user device in real time and stored on the cloud server for statistical and data analysis. In addition, we demonstrate through experiments that outliers occurs when the value of RSSI(Received Signal Strength Indicator) decreases due to communication collisions between UWB Tags, and propose an RSSI outlier correction algorithm to solve this problem.