• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.429-435
• /
• 2012

In this study, a real-time architecture for the detection of clock jumps in the GPS clock behavior is proposed. GPS satellite atomic clocks have characteristics of a second order polynomial in the long term showing sudden jumps occasionally. As satellite clock anomalies influence on GPS measurements which could deliver wrong position information to users as a result, it is required to develop a real time technique for the detection of the clock anomalies especially on the real-time GPS applications such as aviation. The proposed strategy is based on Teager Energy operator, which can be immediately detect any changes in the satellite clock bias estimated from GPS carrier phase measurements. The verification results under numerous cases in the presence of clock jumps are demonstrated.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.953-961
• /
• 2011

IGS(Internation GNSS Service) 초신속궤도력에 포함된 예측궤도력은 실시간 혹은 준실시간 정밀 항법에 적합한 궤도력이다. 이 논문에서는 예측궤도력에서 발생할 수 있는 궤도 이상 발생 현황을 점검하고, NANU(Current Notice Advisories to NAVSTAR Users)와 IGS 방송궤도력(BRDC, Broadcast Ephemerides)를 이용하여 예측궤도력의 이상 검출 성능을 분석하였다. 그 결과 예측궤도력은 2010년 1년간 93회의 궤도 이상이 나타났으며, NANU를 이용할 경우 88%, NANU와 BRDC를 함께 사용할 경우 95%의 이상 검출이 가능함을 확인할 수 있었다.

• Smart Structures and Systems
• /
• 제29권1호
• /
• pp.129-140
• /
• 2022

The effectiveness of system identification, damage detection, condition assessment and other structural analyses relies heavily on the accuracy and reliability of the measured data in structural health monitoring (SHM) systems. However, data anomalies often occur in SHM systems, leading to inaccurate and untrustworthy analysis results. Therefore, anomalies in the raw data should be detected and cleansed before further analysis. Previous studies on data anomaly detection mainly focused on just single type of data anomaly for denoising or removing outliers, meanwhile, the existing methods of detecting multiple data anomalies are usually time consuming. For these reasons, recognising multiple anomaly patterns for real-time alarm and analysis in field monitoring remains a challenge. Aiming to achieve an efficient and accurate detection for multi-type data anomalies for field SHM, this study proposes a pattern-recognition-based data anomaly detection method that mainly consists of three steps: the feature extraction from the long time-series data samples, the training of a pattern recognition neural network (PRNN) using the features and finally the detection of data anomalies. The feature extraction step remarkably reduces the time cost of the network training, making the detection process very fast. The performance of the proposed method is verified on the basis of the SHM data of two practical long-span bridges. Results indicate that the proposed method recognises multiple data anomalies with very high accuracy and low calculation cost, demonstrating its applicability in field monitoring.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.30-39
• /
• 2021

Research in the field of health lighting has continued to advance to reproduce the color temperature of natural light which periodically changes. However, most of this research could only reproduce a uniform circadian color temperature of natural light, therefore failing to realize the characteristics of the circadian cycle of color temperature difference by latitude and longitude. To reproduce the color temperature of natural light on which the characteristics of a region are reflected, the collection technology of real-time characteristics of natural light is needed. If the color temperatures which are not within a periodical pattern due to climate changes, etc., are measured, it will be difficult to judge the occurrence (presence) of the anomalies and to reproduce the circadian cycle of the color temperature of natural light. Therefore, this study proposes an algorithm for judging the anomalies in real time based on the sliding window to reproduce the color temperature of natural light. First, the natural light characteristics DB collected through the on-site measurement were analyzed, the differential values at a one-minute interval were calculated and examined, and then representative color temperature circadian patterns by solar terms were drawn. The anomalies were then detected by the application of the sliding window that calculated the deviation of the color temperature for the measured color temperature data set, which was collected through RGB sensors, while moving along the time sequence. In addition, the presence of anomalies was verified through the comparison study between the detection results and the representative circadian cycle of the color temperature by solar term. The judgment method for the anomalies from the measured color temperature of natural light was proposed for the first time, confirming that the proposed method was capable of detecting the anomalies with an average accuracy of 94.6%.

• 정보처리학회논문지C
• /
• 제12C권1호
• /
• pp.19-28
• /
• 2005

최근 알려지지 않은 공격(unknown attack)으로부터 네트워크를 보호하기 위한 네트워크 트래픽 어노멀리(anomaly) 검출에 대한 관심이 고조되고 있다. 본 논문에서는 캠퍼스 네트워크의 보드라우터(border router)의 NetFlow 데이터로 제공되는 초당비트수(bits per second)와 초당플로수(flows per second)의 상관관계를 단순회귀분석을 통하여 새로운 어노멀리 검출 기법을 제시하였다. 새로이 제안된 기법을 검증하기 위해 실지 캠퍼스 네트워크에 적용하였으며 그 결과론 Holt-Winters seasonal(HWS) 알고리즘과 비교하였다. 특히, 제안된 기법은 기존 RRDtool에 통합시켜 실시간 검출이 가능하도록 설계하였다.

• 한국컴퓨터정보학회논문지
• /
• 제28권4호
• /
• pp.13-20
• /
• 2023

본 논문에서는 데이터의 이상을 탐지하고 예측하는 모델을 통해 VOC 저감 설비에서 실측한 데이터를 분석했다. 이상 탐지 분야에서 안정적인 성능을 보이는 USAD 모델을 이용하여 실시간 데이터의 이상을 탐지하고 이상 원인이 되는 센서를 탐색한다. 또한 자기 회귀 모델을 통해 미래의 이상치를 예측하여 이상이 발생할 시점을 예측하고 경고하는 방법을 제안한다. 실험은 VOC 저감 설비에서 실측한 데이터를 이용하여 시스템의 이상을 탐지할 수 있는지 검증하는 실험을 진행했으며 이상 탐지 실험 결과는 정밀도, 재현율, F1-점수가 각각 98.54%, 89.08%, 93.57%로 높은 성능의 탐지율을 보였다. 센서 별 학습된 모델의 성능은 8개 센서의 정밀도, 재현율, F1-점수를 평균한 결과 각각 99.64%, 99.37%, 99.63%로 높은 성능의 탐지율을 보였다. 또한, 센서 별 탐지 실험에 대한 타당성을 확인하기 위해 구한 해밍 손실은 0.0058로 안정적인 성능을 보였다. 그리고 이상 예측 실험 결과는 평균절대오차 0.0902로 안정적인 성능을 보였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.236-241
• /
• 1998

The NOAA AVHRR remote sense SST data, collected by the National Fisheries Research and Development Institute (NFRDI), are analyzed in order to understand the spatial and temporal distributions of SST in the seas adjacent to Korea. Our study is based on 10-day SST images during last 7 years (1991-1997). For a time series analysis of multiple 557 images, all of images must be aligned exactly at the same position by adjusting the scales and positions of each SST image. We devised an algorithm which yields automatic detections of cloud pixels from multiple SST images. The cloud detection algorithm is based on a physical constraint that SST anomalies in the ocean do not exceed certain limits (we used $\pm$ 3$^{\circ}C$ as a criterion of SST anomalies). The remote sense SST data are tuned by comparing remote sense data with observed SST at coastal stations. Seasonal variations of SST are studied by harmonic fit of SST normals at each pixel. The SST anomalies are studied by statistical method. We found that the SST anomalies are rather persistent with time scales between 1 and 2 months. Utilizing the persistency of SST anomalies, we devised an algorithm for a prediction of future SST Model fit of SST anomalies to the Markov process model yields that autoregression coefficients of SST anomalies during a time elapse of 10 days are between 0.5 and 0.7. We plan to improve our algorithms of automatic cloud pixel detection and prediction of future SST. Our algorithm is expected to be incorporated to the operational real time service of SST around Korea.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.183-188
• /
• 2001

The NOAA AVHRR remotely sensed SST data, collected by the National Fisheries Research and Development Institute (NFRDI), are analyzed in order to understand the spatial and temporal distributions of SST in the sea near korea. Our study is based on 10-day SST images during last 7 years (1991-1997). For a time series analysis of multiple SST images, all of images must be consistent exactly at the same position by adjusting the scales and positions of each SST image. We devised an algorithm which automatically detects cloud pixels from multiple SST images. The cloud detection algorithm is based on a physical constraint that SST anomalies in the ocean do not exceed certain limits (we used $\pm$3$^{\circ}C$ as a criterion of SST anomalies). The remotely sensed SST data are tuned by comparing remotely sensed data with observed SST at coastal stations. Seasonal variations of SST are studied by harmonic fit of SST normals at each pixel and the SST anomalies are studied by statistical method. It was found that the SST anomalies are rather persistent for one or two months. Utilizing the persistency of SST anomalies, we devised an algorithm for a prediction of future SST. In the Markov lprocess model of SST anomalies, autoregression coefficients of SST anomalies during a time elapse of 10 days are between 0.5 and 0.7. The developed algorithm with automatic cloud pixel detection and rediction of future SST is expected to be incorporated to the operational real time service of SST around Korea.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.71-77
• /
• 2013

Advanced semiconductor manufacturing technology requires methods to maximize tool efficiency and improve product quality by reducing process variability. Real-time plasma process monitoring and diagnosis have become crucial for fault detection and classification (FDC) and advanced process control (APC). Additional sensors may increase the accuracy of detection of process anomalies, and optical monitoring methods are non-invasive. In this paper, we propose the use of a chromatic data acquisition system for real-time in-situ plasma process monitoring called the Plasma Eyes Chromatic System (PECS). The proposed system was initially tested in a six-inch research tool, and it was then further evaluated for its potential to detect process anomalies in an eight-inch production tool for etching blanket oxide films. Chromatic representation of the PECS output shows a clear correlation with small changes in process parameters, such as RF power, pressure, and gas flow. We also present how the PECS may be adapted as an in-situ plasma arc detector. The proposed system can provide useful indications of a faulty process in a timely and non-invasive manner for successful run-to-run (R2R) control and FDC.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.376-382
• /
• 2014

E-Actuator is an essential part of an eVGT, it receives the command from the main ECU and controls the vane. An e-Actuator failure can cause an abrupt change in engine output and it may induce an accident. Therefore, it is required to detect anomalies in the e-Actuator in real time to prevent accidents. In this paper, an e-Actuator fault detection method using on-line parameter identification is proposed. To implement on-line fault detection algorithm, many constraints are considered. The test input and sampling rate are selected considering the constraints. And new recursive system identification algorithm is proposed which reduces the memory and MCU power dramatically. The relationship between the identified parameters and real elements such as gears, spring and motor are derived. The fault detection method using the relationship is proposed. The experiments with the real broken gears show the effectiveness of the proposed algorithm. It is expected that the real time fault detection is possible and it can improve the safety of eVGT system.