• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.21-27
• /
• 2018

Wearing degree and uneven wearing detection algorithm using horizontal edge information is proposed in this paper. The noise in the input image is removed by bilateral filter, and then edges are extracted from the filtered image by using the proposed mask. As the tire is worn, grooves of tire shoulder or sipes are changed more than the vertical grooves. Therefore the edges from grooves of tire shoulder or sipes have more information about the tire wearing than the edges from vertical grooves. Proposed mask that is reflected this feature is used to extract the horizontal edges. After edge extraction, the edge image is represented in two-level system. The edge pixels of the binarization image are used to decide the wearing degree and uneven wearing. This proposed method can be used easily without any other equipments. The proposed method is conducted with a real vehicle, and the experimental results show the good performance of the proposed method in detecting wearing degree and uneven wearing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.3
• /
• pp.101-106
• /
• 2004

Recently, a network defense simulator becomes essential in studying cyber incidents because the cyber terror become more and more interesting. The network defense simulator is a tool to estimate damages and an effectiveness of a defense mechanism by modeling network intrusions and defense mechanisms. Using this tool, users can find efficient ways of preventing a cyber terror and recovering from the damage. Previous simulators start the simulation after entire scenario has made and been loaded to simulation engine. However, in this way it can't model human judgement and behavior, and it can't simulate the real cyber terror very well. In this paper, we have added a dynamic simulation component to our previous network security simulator. This component improved accurate modeling of network intrusions and defense behaviors. We have also proposed new modified architecture of the simulation system. Finally we have verified correct simulation results from stammer worn simulation.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.83-100
• /
• 1998

The purpose of this study is to figure out how stage costume of Peking Opera communicates what the character wants to inform to spectator. The stage costume means the clothing, shoes, headdress, accessory that the cast is worn for communicating personality of character. Stage costume not only reveals the character of new spirit who the director and the work is like to create, but also makes the style of play harmonizing with the atmosphere of the work. So, the stage costume in the play is a sort of symbol system that forms the depth of play. The stage costume of Peking Opera was formed on the basis of the Chinese traditional stage costume in the Qing period, however the style of stage costume was beautified the costume of Ming period and here contained the factors of successive costumes. But the stage costume of Peking Opera don't have the same rank system with real history costume and don't have demarcation according to period and history. Only it is that transformed and created the real history costume with Chinese fine view and made how they wear Chinese fine view and made how they wear the costume according to position, age, personality of character in the play. In the stage costume of Peking Opera, the color is cultural language that director can communicate to spectators and can inform spectator of sex, age, personality, position of the character. The color of the stage costume of Peking Opera reflects the principles of Yin and Yang and the five elements of the Chinese cosmogony. The pattern of decoration also makes the personality and characteristic of the character. The dragon pattern symbols the authority and majesty, so only the character of high position can use it. The pattern of tiger and leopard symbols bravery, so the military officer can use it. Civil officer decorates with the pattern of Japanese apricot, orchid, chrysanthmum, bamboo that symbols integrity and honor. The stage costume of Peking Opera communicates the identity of character with the special form of costume. Kanjien is a costume of the young priestess, Houyi is the Sunwukong'costume. Chayi is a costume of boatman. Lingzi, Sweixiu, Kaoqi is the props for the foramtive effect of stage costume, also they play an important part in expressing the emotion situation. In the result of study, we could know that the form, color, pattern of the stage costume and props of Peking Opera play important parts in communicating informations that let spectator can understand the play. So, the stage costume of Peking Opera is an‘picturizing costume’that the form, color, pattern of the stage costume is a sort of symbol system. It makes spectator feels actually the viewing Peking Opera.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.21-31
• /
• 2018

Korean banknotes are similar in size, and their braille tend to worn out as they get old. These characteristics of Korean banknotes make the blind people, who mainly rely on the braille, even harder to distinguish the banknotes. Not only that, this can even lead to economic loss. There are already existing systems for recognizing the banknotes, but they don't support Korean banknotes. Furthermore, because they are developed as a mobile application, it is not easy for the blind people to use the system. Therefore, in this paper, we develop a Raspberry Pi-based banknote recognition system that not only recognizes the Korean banknotes but also are easily accessible by the blind people. Our system starts recognition with a very simple action of the user, and the blind people can hear the recognition results by sound. In order to choose the best feature extraction algorithm that directly affects the performance of the system, we compare the performance of SIFT, SURF, and ORB, which are representative feature extraction algorithms at present, in real environments. Through experiments in various real environments, we adopted SIFT to implement our system, which showed the highest accuracy of 95%.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.534-546
• /
• 2023

If the disc cutter is excessively worn or damaged, it becomes incapable of rotating and efficiently cutting rockmass. Therefore, it is important to appropriately manage the replacement cycle of the disc cutter based on its degree of wear. In general, the replacement cycle is determined based on the results of manual inspection. However, the manual measurements has issues related to worker safety and may lead to inaccurate measurement results. For these reasons, some foreign countries are developing the real-time measurement system of disc cutter wear by using different sensors. The ultrasonic sensors, eddy current sensors, magnetic sensors, and others are utilized for measuring the wear amount of disc cutters. In this study, the applicability of eddy current sensors for real-time measurement of wear amount in TBM disc cutters was evaluated. The distance measurement accuracy of the eddy current sensor was assessed through laboratory tests. In particular, the accuracy of eddy-current sensor was evaluated in various environmental conditions within the cutterhead chamber. In addition, the measurement accuracy of the eddy current sensor was validated using a 17-inch disc cutter.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.125-135
• /
• 1993

The purposes of this research are firstly to define the characteristics of movement on the costume, secondly to demonstrate that fine art, expecially in relation to kinetic art, has become a good motif in modern costume de-sign, and thirdly to examin the characteristics of movement as shown in modern costume de-sign. For this study, we selected and analyzed some costume designs among those introduced in fashion magazines, which are Collections, Fashion-Preview, Fashion Show, Collezioni, and L'Officiel that have been issued since 1988. As this research is carried out only through the analysis of pictures, it is not ac-companied by a study on material itself. The result of this study is that the ex-pression of movement on modern fashion can be shown in two ways, one is the inclusive and subordinate movement expressed on the cloth-ing according to the motion of body when they are worn, and the other is the movement caused by the very designs of clothing. And the latter can be also divided in two ways, the illusionistic movement and the actual move-ment. The expression of actual movement is made through the emphasis of direction, rhythm, and dimension of the costume. And the illusionistic movement is expressed by the de-sign to which the textile pattern or reflection of light is applied so that the movement is larger than the actual movement. A sense of direction expressed on the cos-tume by the actual movement creates a light rhythm and adds interest to the costume. This reflects a part of psychology of modern men who are not accustomed to the statics. In the rapidly changing society of information our modern men seek after movement even in the statics. It is also true in the clothing and they seem to get a psychological rest through the immediated visual change as shown in fashion design. The simple and cheerful rhythm expressed by the illusionistic movement on the costume is attempted in order to overcome the static tediousness caused by simple design. These elements of movement cause the en-largement of visible range and create another enlarged shape other than the real one, so that they come to remove the dullness and monot-ony in costume design and provoke interest in costume, as if kinetic art reveals the various aspects that transcend the closed area of fine art upon the motif of 'movement'. finally, as this paper deals with the ex-pression of movement as shown in the costume design which prevailed after 1988, it is desir-able hereafter to study more about the fashion since 1950 when kinetic art began in earnest, along with the comparative study on the ex-pression of movement in our Korean designer's and foreign designer's works.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.553-581
• /
• 2022

Shortly after tunnel boring machine (TBM) was introduced in the tunneling industry, the use of TBM has surprisingly increased worldwide due to its performance together with the benefit of being safely and environmentally friendly. One of the main cost items in the TBM tunneling in rock and soil is changing damaged or worn cutters. It is because that the cutter change is a time-consuming and costly activity that can significantly reduce the TBM utilization and advance rate and has a major effect on the total time and cost of TBM tunneling projects. Therefore, the importance of accurately evaluating the cutter life can never be overemphasized. However, the prediction of cutter wear in soil, rock including mixed face is very complex and not yet fully clarified, subsequently keeping engineers busy around the world. Various prediction models for cutter wear have been developed and introduced, but these models almost usually produce highly variable results due to inherent uncertainties in the models. In this study, a case study of design and construction of disc cutter change is introduced and analyzed, rather than proposing a prediction model of cutter wear. As the disc cutter is strongly affected by the geological condition, TBM machine characteristic and operation, authors believe it is very hard to suggest a generalized prediction model given the uncertainties and limitations therefore it would be more practical to analyze a real case and provide a detailed discussion of the difference between prediction and result for the cutter change. By doing so, up-to-date idea about planning and execution of cutter change in practice can be promoted.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.933-943
• /
• 2021

Objective : Percutaneous pedicle screw (PPS) fixation is a needle based procedure that requires fluoroscopic image guidance. Consequently, radiation exposure is inevitable for patients, surgeons, and operation room staff. We hypothesize that reducing the production of radiation emission will result in reduced radiation exposure for everyone in the operation room. Research was performed to evaluate reduction of radiation exposure by modifying imaging manner and mode of radiation source. Methods : A total of 170 patients (680 screws) who underwent fusion surgery with PPS fixation from September 2019 to March 2020 were analyzed in this study. Personal dosimeters (Polimaster Ltd.) were worn at the collar outside a lead apron to measure radiation exposure. Patients were assigned to four groups based on imaging manner of fluoroscopy and radiation modification (pulse mode with reduced dose) : continuous use without radiation modification (group 1, n=34), intermittent use without radiation modification (group 2, n=54), continuous use with radiation modification (group 3, n=26), and intermittent use with radiation modification (group 4, n=56). Post hoc Tukey Honest significant difference test was used for individual comparisons of radiation exposure/screw and fluoroscopic time/screw. Results : The average radiation exposure/screw was 71.45±45.75 µSv/screw for group 1, 18.77±11.51 µSv/screw for group 2, 19.58±7.00 µSv/screw for group 3, and 4.26±2.89 µSv/screw for group 4. By changing imaging manner from continuous multiple shot to intermittent single shot, 73.7% radiation reduction was achieved in the no radiation modification groups (groups 1, 2), and 78.2% radiation reduction was achieved in the radiation modification groups (groups 3, 4). Radiation source modification from continuous mode with standard dose to pulse mode with reduced dose resulted in 72.6% radiation reduction in continuous imaging groups (groups 1, 3) and 77.3% radiation reduction in intermittent imaging groups (groups 2, 4). The average radiation exposure/screw was reduced 94.1% by changing imaging manner and modifying radiation source from continuous imaging with standard fluoroscopy setting (group 1) to intermittent imaging with modified fluoroscopy setting (group 4). A total of 680 screws were reviewed postoperatively, and 99.3% (675) were evaluated as pedicle breach grade 0 (<2 mm). Conclusion : The average radiation exposure/screw for a spinal surgeon can be reduced 94.1% by changing imaging manner and modifying radiation source from real-time imaging with standard dose to intermittent imaging with modified dose. These modifications can be instantly applied to any procedure using fluoroscopic guidance and may reduce the overall radiation exposure of spine surgeons.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.45-66
• /
• 1997

This thesis is a study on the kaftan styles iin Asia. The purpose of he study was to examine the origin o the kaftan concentrating on the history and cultural backgrounds of nomads in he Western Central and North Eastern Asia. Secondly for more thorough study and expla-nation on how these kaftans contributed to East-West trade along the silk road. wall paintings and miniature illuminations along Oasis roads persia and Saracen period were compared, Also real kaftans were compared and analyzed the characteristics of Western (Turkey palestine) Central(Kazakistan Uz-bekistan Tadzhistan Qyrgyztan Turkmenistan) and the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the style classifications according to their peculiarities of the various kaftans as well as how kaftan gave important influences on custumes of different religious sects. The kaftan is a long coat-like garment with front openings fastened with long sash having an extra long sleeves which were worn by middle and high class nomadics throughout the West Central and North Eastern Asia This type of kaftans were a basic clothing for nomadics since they were constantly moving fromone to another areas on their horse back riding. They also wore tight trousers with boots. Kaftans seem to be originated from nomads of Steppe around B.C. 800 On B. C 400 west asian areas such as Solokha Kul-oba Kulogan had pictures sculptues on vases showing kaftans of half coat type length with front opening tied with band. Also the materials used were the products of animals such as wool or felt with animal designs showing Scythian nomads. In the North Eastern Asia Hsiung-Nu were active in Kazakha North Altai and Mongol The Clothing and fabrics exfavated near Noin-ula Pazyrik showed many samples of kaftan with trousers with other interment be-longings with a corpse around B.C 300 to A. D 100 when trades along the silk roads were proven by many historians Kaftans excavated in this area wore red front opening silk materials which suggesting settling down of nomads. in he central Asia Dol-gull near Altai mountain area were mainly miners who later had many trades with Persia and Bizantine. After Dol-gull Bezeklik temple Samarkant Kizil cow Budda sculture wall paintings of Astana tomb showed typical kaftan of this re-gion. These were both hip covered length as well as long coat with narrow sleeves. Es-pecially they had different color band fron the main kaftan with grogeously and splendously designed silk. In perusia during A. D 1400 to 1600 minia-ture illumination showed kaftan as a high class symbol more than clothing purpose. They had best quality silk with extra long sleeves draping and had a layers of kaftans one on top of anther as a symbol of wealth These Kaftans with different colors and designs were even more beautiful with their effective combinations and contrast of colors. On the other hand the lower class common people and servants wore simple kaftan with the front part of the kaftan were slipped into the belt in order to be more active and con-venient to work, The real kaftans discovered at Topkapi Saray palace of Turkey from A. D 1300 to 1900 were also compared. These kaftans were very numerous in numbers as well as designs The materials and designs used were also vari-ous such as Chinese to Italian silk. The shaped and pattern itself were not much different from the previous nomad's Kaftans. The Palestian kaftans remained were from the beginning of 19th and 20th century. Since this area is hot and dry desert they used black and navy blue colors mostly in order to exclude the sun lights. The patterns used were similar to Nomads and Bedouin with cross stiches and patch work decorations. In the central Asia they had similar life style and natural environmental cnditions with Turkish tribe which resulted in similar kaftan styles as nomads. Mongols conserved basic patterns of kaftan since Cinggis Khan with deep folding in order to keep warm. At last the kaftans studided in this thesis were classified in to four such as half coat long coat jacket and vest style. A pattern used in the Central Asia were zigzag and ani-mal design whereas in the West Asia were floral plant arabesk and circle pattern. As I discussed previously kaftan styles of nomads in the Asia maintained its basic pat-tern throughout the history except slight changes in color gusset sleeve shapes. These slight changes were made according to the need to adapt the need of environmental natu-ral conditions, The reason for aboriginality of kaftan in Asia was its simplicity and con-venience Most interesting fact is that for all these years Mongols are still wearing kaftan in their life ensuring us that they art the preserves of old kaftan. Since this thesis dealt enormous Asian regions I had a limitation of not being able to cover the Far Esatern asian areas such as Korea China and Japan how these kaftans were influenced in their clothing history as well as Eastern and Western culture. This topic along with the studies on materials and designs of patterns of kaftan will be another research project in the future.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.143-155
• /
• 2011

Lately electronic tagging policy for the sexual offenders was introduced in order to reduce and prevent sexual offences. However, most sexual offences against children happening these days are committed by the tagged offenders whose identities have been released. So, for the crime prevention, we need measures with which we could minimize the suffers more promptly and actively. This paper suggests a new system to relieve the sexual abuse related anxiety of the children and solve the problems that electronic bracelet has. Existing bracelets are only worn by serious criminals, and it's only for risk management and positioning, there is no way to protect the children who are the potential victims of sexual abuse and there actually happened some cases. So we suggest also letting the students(children) wear the LBS(Location Based Service) and USN(Ubiquitous Sensor Network) technology based electronic bracelets to monitor and figure out dangerous situations intelligently, so that we could prevent sexual offences against children beforehand, and while a crime is happening, we could judge the situation of the crime intelligently and take swift action to minimize the suffer. And by checking students' attendance and position, guardians could know where their children are in real time and could protect the children from not only sexual offences but also violent crimes against children like kidnapping. The overall system is like follows : RFID Tag for children monitors the approach of offenders. While an offender's RFID tag is approaching, it will transmit the situation and position as the first warning message to the control center and the guardians. When the offender is going far away, it turns to monitoring mode, and if the tag of the child or the offender is taken off or the child and offender stay at one position for 3~5 minutes or longer, then it will consider this as a dangerous situation, then transmit the emergency situations and position as the second warning message to the control center and the guardians, and ask for the dispatch of police to prevent the crime at the initial stage. The RFID module of criminals' electronic bracelets is RFID TAG, and the RFID module for the children is RFID receiver(reader), so wherever the offenders are, if an offender is at a place within 20m from a child, RFID module for children will transmit the situation every certain periods to the control center by the automatic response of the receiver. As for the positioning module, outdoors GPS or mobile communications module(CELL module)is used and UWB, WI-FI based module is used indoors. The sensor is set under the purpose of making it possible to measure the position coordinates even indoors, so that one could send his real time situation and position to the server of central control center. By using the RFID electronic roll book system of educational institutions and safety system installed at home, children's position and situation can be checked. When the child leaves for school, attendance can be checked through the electronic roll book, and when school is over the information is sent to the guardians. And using RFID access control turnstiles installed at the apartment or entrance of the house, the arrival of the children could be checked and the information is transmitted to the guardians. If the student is absent or didn't arrive at home, the information of the child is sent to the central control center from the electronic roll book or access control turnstiles, and look for the position of the child's electronic bracelet using GPS or mobile communications module, then send the information to the guardians and teacher so that they could report to the police immediately if necessary. Central management and control system is built under the purpose of monitoring dangerous situations and guardians' checking. It saves the warning and pattern data to figure out the areas with dangerous situation, and could help introduce crime prevention systems like CCTV with the highest priority. And by DB establishment personal data could be saved, the frequency of first and second warnings made, the terminal ID of the specific child and offender, warning made position, situation (like approaching, taken off of the electronic bracelet, same position for a certain time) and so on could be recorded, and the data is going to be used for preventing crimes. Even though we've already introduced electronic tagging to prevent recurrence of child sexual offences, but the crimes continuously occur. So I suggest this system to prevent crimes beforehand concerning the children's safety. If we make electronic bracelets easy to use and carry, and set the price reasonably so that many children can use, then lots of criminals could be prevented and we can protect the children easily. By preventing criminals before happening, it is going to be a helpful system for our safe life.