• 제목/요약/키워드: Real grid

검색결과 710건 처리시간 0.024초

정밀 위치정보 데이터를 이용한 수중 하저면의 수심 정보 획득 시스템 (Data Collection System to Water Depth in Reservoir Using Accurate Location Information)

  • 김온;고영진
    • 한국전자통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.327-334
    • /
    • 2020
  • 본 논문에서는 위성으로부터의 전파를 이용해 지상의 위치를 측정하는 글로벌 위성항법시스템(GNSS)과 음향측심기를 같이 사용하여 저수지의 정확한 위치 정보와 수심 정보 데이터를 동시에 획득할 수 있는 무인 조사 시스템을 개발하였다. 이 시스템은 자동 경로 생성 프로그램으로 5m, 10m 및 20m의 그리드 크기에 대한 입력 조건에 따라 자동으로 순항 경로를 생성토록 하였고, 또한 자동으로 정확한 순항 경로를 제어하도록 하였다. 개발된 시스템은 전라남도 순천시 서면에 위치한 용곡(건천) 저수지에서 적용 가능성을 검증하였다. 61.1ha의 전체 저수지 수역 조사 시간에 대한 검증 결과는 새로운 시스템이 매우 높은 품질의 공간 분해능을 포함하여 저수지의 수심을 신속하게 조사할 수 있음을 나타내었다.

다수 BESS의 SOC Balancing을 고려한 퍼지 드룹 제어 (Fuzzy Droop Control considering SOC Balancing of BESSs)

  • 한성근;유형준;김학만
    • 전기학회논문지
    • /
    • 제64권4호
    • /
    • pp.616-622
    • /
    • 2015
  • A microgrid which is composed of distributed generation systems, energy storage systems and loads is operated in the grid-connected mode and in the islanded mode. Especially, in the islanded mode, a microgrid should maintain frequency in the allowed range. The frequency is decided by a balance between power supply and power demand. In general, the frequency is controlled by using battery energy storage systems (BESSs) in the microgrid. Especially, droop control is applied to controlling BESSs in the microgrid. Meanwhile, over-charging and deep-discharging of BESS in operation and control cause life-shortening of batteries. In this paper, a fuzzy droop control is proposed to change droop gains adaptively by considering state of charge (SOC) of BESSs to improve the life cycle of the battery. The proposed fuzzy droop control adjusts droop gains based on SOC of BESSs in real time. In other to show the performance of the proposed fuzzy droop control, simulation based on Matlab/Simulink is performed. In addition, comparison of the convention droop control and the proposed fuzzy droop control is also performed.

Design of Falling Context-aware System based on Notification Service using Location Information and Behavior Data

  • Kwon, TaeWoo;Lee, Daepyo;Lee, Jong-Yong;Jung, Kye-Dong
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제10권3호
    • /
    • pp.42-50
    • /
    • 2018
  • The majority of existing falling recognition techniques provide service by recognizing only that the falling occurred. However, it is important to recognize not only the occurrence of falling but also the situation before and after the falling, as well as the location of the falling. In this paper, we design and propose the falling notification service system to recognize and provide service. This system uses the acceleration sensor of the smartphone to recognize the occurrence of a falling and the situation before and after the falling. In order to check the location of falling, GPS sensor data is used in the Google Map API to map to the map. Also, a crosswalk map converted into grid-based coordinates based on the longitude and latitude of the crosswalk is stored, and the locations before and after falling are mapped. In order to reduce the connection speed and server overload for real-time data processing, fog computing and cloud computing are designed to be distributed processing.

음해법에 의한 2차원 조류유동 계산법 (An Implicit Numerical Method for Two-Dimensional Tidal Computation)

  • 김선영;송무석
    • 대한조선학회논문집
    • /
    • 제35권1호
    • /
    • pp.1-14
    • /
    • 1998
  • 2차원 천수방정식에 기초한 조류계산 수치모델을 개발하였다. 복잡한 해안선의 입력을 단순화할 수 있는 직각격자를 사용하였으며, 방정식은 효율이 뛰어난 것으로 알려져 있는 인수분해음해법(Implicit Factorization Method)에 의하여 수치적으로 풀었다. 대류항은 상류차분법으로 처리하여 수치소산이 자동적으로 들어가도록 하였으며, 따라서 수치불안정에 의한 발산을 억제할 수 있었다. 모델의 검증을 위하여 선형화된 천수방정식을 풀고 계산결과를 해석해와 비교하였으며 잘 일치하고 있음을 확인하였다. 수치모델의 응용 예로서 인천항부근의 경인운하 개발예정인 수로에서의 조류 계산결과를 보였다.

  • PDF

Investigation on the inductive and resistive fault current limiting HTS power cable

  • Lee, Sangyoon;Choi, Jongho;Kim, Dongmin;Kwon, Yonghyun;Kim, Seokho;Sim, Kideok;Cho, Jeonwook
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제16권2호
    • /
    • pp.59-63
    • /
    • 2014
  • HTS power cable bypass the fault current through the former to protect superconducting tapes. On the other hand, the fault current limiting (FCL) power cable can be considered to mitigate the fault current using its increased inductance and resistance. Using the increased resistance of the cable is similar to the conventional resistive fault current limiter. In case of HTS power cable, the magnetic field of HTS power cable is mostly shielded by the induced current on the shield layer during normal operation. However, quench occurs at the shield layer and its current is kept below its critical current at the fault condition. Consequently, the magnetic field starts to spread out and it generates additional inductive impedance of the cable. The inductive impedance can be enhanced more by installing materials of high magnetic susceptibility around the HTS power cable. It is a concept of SFCL power cable. In this paper, a sample SFCL power cable is suggested and experimental results are presented to investigate the effect of iron cover on the impedance generation. The tests results are analyzed to verify the generation of the inductive and resistive impedance. The analysis results suggest the possible applications of the SFCL power cable to reduce the fault current in a real grid.

RTDS를 이용한 영구자석형 동기발전기를 갖는 풍력발전시스템의 과도현상 해석 (RTDS based Transient Analysis of PMSG Type wind Power Generation System)

  • 황철상;김경훈;김남원;이효근;서효룡;박정도;이동영;이상진;박민원;유인근
    • 전기학회논문지
    • /
    • 제60권3호
    • /
    • pp.572-576
    • /
    • 2011
  • The operation of permanent magnet synchronous generator (PMSG) type wind power generation system (WPGS) can be affected by the utility condition. Consequently, transient condition of utility should be analyzed for the safe and reliable operation of WPGS. This paper presents transient analysis results of a PMSG type WPGS using real time digital simulator (RTDS). A fault condition was applied to the transient analysis of PMSG type WPGS as the transient grid condition. The simulation results were analyzed to show the operational characteristic of PMSG type WPGS under the transient phenomenon of utility.

모더니즘 조경설계에 미친 미술의 영향에 관한 연구 (A Study on the Influences of Fine Art On Modern Landscape Design)

  • 김한배
    • 한국조경학회지
    • /
    • 제29권4호
    • /
    • pp.53-66
    • /
    • 2001
  • Modern art has had a great impact on the concepts and the formal attributes of modern landscape design. This study aimed at examining the origins of modern landscape design languages especially in relation to the influence of find art during the modernist age. The formal reductionism of Cubistic paintings finally lead to the formulation of Geometrical Abstractionism which became the basic formal model for ˝Regular Style˝; one of the representative modern landscape style. This Regular Style is mostly based on the formal structure of ´Grids´, which was developed by many landscape designer like Eckbo, Kley and Halprin. On the other hand, the ´Bio-morphic Form´ originally used in Surrealistic Art became the formal model for ˝Organic Style˝; the other representative modern landscape style, developed mostly by the landscape designers like Church, Burle-Mark and Bye. Thus, ´Grids´ and ´Bio-morphic Form´ became the dual icons of modern art and modern landscape design. Although these modern landscape design styles were ground breaking departure from the conventional formal/informal tradition and expanded possibilities in formal experimentations, They also produced several crucial limitations originated from the scientific reductionism and autonomous aesthetics of modern art, like the physical and cultural discontinuation from surrounding environments and the formal alienation from the real life world, which gave rise to the emergence of post-modern thinking of landscape design.

  • PDF

물체의 3-D 형상 복원을 위한 삼각측량 시스템 (A Study on the 3-D Information Abstraction of object using Triangulation System)

  • 김국세;이정기;조애리;배일호;이준
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2003년도 춘계학술발표논문집 (상)
    • /
    • pp.409-412
    • /
    • 2003
  • The 3-D shape use to effect of movie, animation, industrial design, medical treatment service, education, engineering etc... But it is not easy to make 3-D shape from the information of 2-D image. There are two methods in restoring 3-D video image through 2-D image; First the method of using a laser; Second, the method of acquiring 3-D image through stereo vision. Instead of doing two methods with many difficulties, I study the method of simple 3-D image in this research paper. We present here a simple and efficient method, called direct calibration, which does not require any equations at all. The direct calibration procedure builds a lookup table(LUT) linking image and 3-D coordinates by a real 3-D triangulation system. The LUT is built by measuring the image coordinates of a grid of known 3-D points, and recording both image and world coordinates for each point; the depth values of all other visible points are obtained by interpolation.

  • PDF

Model of Information Exchange for Decentralized Congestion Management

  • Song, Sung-Hwan;Jeong, Jae-Woo;Yoon, Yong-Tae;Moon, Seung-Il
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권2호
    • /
    • pp.141-150
    • /
    • 2012
  • The present study examines an efficient congestion management system compatible with the evolving environment. The key is to build an information model shared and exchanged for marketbased solutions to alleviate congestion. Traditional methods for congestion management can be classified into two categories, i.e., the centralized scheme and the decentralized scheme, depending on the extent to which the independent system operator (ISO) is involved in market participants' (MPs) activities. Although the centralized scheme is more appropriate for providing reliable system operation and relieving congestion in near real-time, the decentralized scheme is preferred for supporting efficient market operation. The minimum set of information between the ISO and MPs for decentralized scheme is identified: i) congestion-based zone, ii) Power Transfer Distribution Factors, and iii) transmission congestion cost. The mathematical modeling of the proposed information is expressed, considering its process of making effective use of information. Numerical analysis is conducted to demonstrate both cost minimization from the MP perspective and the reliability enhancement from the ISO perspective based on the proposed information exchange scheme.

Optimization of Wind Power Dispatch to Minimize Energy Storage System Capacity

  • Nguyen, Cong-Long;Lee, Hong-Hee
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권3호
    • /
    • pp.1080-1088
    • /
    • 2014
  • By combining a wind turbine with an energy storage system (ESS), we are able to attenuate the intermittent wind power characteristic making the power derived from a wind farm dispatchable. This paper evaluates the influence of the phase delay of the low-pass filter in the conventional smoothing power control on the ESS capacity; longer phase delays require a larger ESS capacity. In order to eliminate the effect of the phase delay, we optimize the power dispatch using a zero-phase low-pass filter that results in a non-delayed response in the power dispatch. The proposed power dispatching method significantly minimizes the ESS capacity. In addition, the zero-phase low-pass filter, which is a symmetrical forward-reverse finite impulse response type, is designed simply with a small number of coefficients. Therefore, the proposed dispatching method is not only optimal, but can also be feasibly applied to real wind farms. The efficacy of the proposed dispatching method is verified by integrating a 3 MW wind turbine into the grid using wind data measured on Jeju Island.