• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.735-738
• /
• 1998

To develop an effective virtual prototyping methodology for the PLC(Programmable Logic Controller) based real-time systems, a conversion algorithm from RLL(Relay Ladder Logic) to statechart is presented in this paper. The RLL is the main programming language to represent the operation of the PLC, and the statechart is the most widely used tool in the field of virtual prototyping in order to represent the behaviour of real-time systems. A virtual prototyping for an example case is implemened to evaluate the benefit of the proposed algorithm.

• 전자공학회논문지CI
• /
• 제43권6호
• /
• pp.60-70
• /
• 2006

유비쿼터스 환경에서의 비디오 적응 변환을 위하여 현재 MPEG-4 AVC/SE SVC에서는 공간적, 시간적, 품질적 스케일러빌리티를 지원하고 있다. 이러한 스케일러빌리티의 변환은 가변적인 대역폭을 가지는 네트워크 특성에 따라 실시간으로 이루어져야 한다. 그러나 현재의 SVC에서는 품질적 스케일러빌리티에 대해서는 실시간으로 스케일러빌리티를 변환할 수 잇지만 공간적, 시간적 스케일러빌리티에 대해서는 이를 제대로 지원할 수 없다. 이에 본 논문에서는 이와 관련된 문제점들을 자세히 알아보고 이를 해결하기 위한 방법을 제안한다. 부호시에는 주기적으로 IDR NAL을 삽입하였다. 추출시에는 실시간 추출에 필요한 정보들을 미리 분석한 후 실제 추출시에 활용하여 실시간 추출을 가능하도록 하였다. 마지막으로 복호시에는 실시간 스케일러빌리티를 지원할 수 있는 프로세스를 정의하였다. 이를 JSVM4.0에 구현하였고 주어진 네트워크 대역폭에 스케일러빌리티를 통하여 적응된 비트스트림의 비트레이트, PSNR, 스케일러빌리티를 측정하여 제안된 방법의 유효성을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1767-1770
• /
• 2003

This paper proposes an efficient network architecture for reflective memory system (RMS). Using this architecture, the time for broadcasting a shared-data to all nodes can be significantly shortened. The device named topology conversion switch (TCS) is implemented to realize the network architecture. The implemented TCS is applied to the ethernet based real time control network (ERCnet) to evaluate the performance.

• 시스템엔지니어링학술지
• /
• 제2권2호
• /
• pp.21-26
• /
• 2006

In modern systems technology, increasingly more systems are anticipated to operate in real-time environment. These systems are usually complex to implement since it is not easy to satisfy the real-time requirement for both hardware and software components simultaneously. In this paper, we first review an object-oriented development process that was proposed earlier for software-intensive real-time system using the Unified Modeling Language (UML). We then study how to improve the problems that the UML approach might have. Applying the systems engineering(SE) process yields useful results which include : 1) an improved requirements management over the whole system life-cycle ; 2) a detailed scenario on how to carry out the SE process ; and 3) a conversion process from the text-based requirements to the UML-based graphic ones.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.63-68
• /
• 2009

As the complexity of the power system becomes higher, tests of the new devices, such as exciter and PCS(Power Conversion System) of the distributed generation sources, in the real operating condition are more important. However tests of the unverified devices in the real power system may cause hazardous malfunction of the system. In order to avoid this problem, power devices may be tested with the real-time simulators instead of the real power system. This paper presents an real-time multi machine power system simulator using PCs(Personal Computer) and Fast Ethernet. Developed real-time simulator performs the electro-mechanical dynamic simulation of multi-machine power system by the network distributed computing technique. Because the simulator consists of usual PCs and Fast Ethernet, it is possible to make up a simulation system very cheaper than the conventional real-time simulator which consists of dedicated expensive hardware devices. The performance of the developed simulator is tested and verified with the scaled model excitation system. The test which adjust the control parameters of the exciter is performed with the well-known New England 10 generator 39 bus sample power system.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.717-722
• /
• 2013

The wastewater reclamation and reusing system has been rising as an alternative of water resource exhaustion that the whole world is experiencing. In order to be able to bring about improvement of the existing wastewater reclamation and reusing system, this research has developed of Conversion-Human Machine Interaction (C-HMI) based real-time control and monitoring system such as a sensor module and gate module, web monitoring system. This system was communication almost-error-free in various environment and situation. As a result, we have achieved our goal that has to doing work correctly as a sensor and gateway module that communication error is less than 0.2% throughout the embodied system and add that it can be easily controled and configured as an interface equipment to a complex sensor of water quality. According to this, the construction of a database capable of analyzing and assessing collection, storage and various elements of reliable water quality and flow rate data can be possible.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.396-402
• /
• 2010

In this paper the principles and structure of a WTS (Wind Turbine Simulator) are described. The proposed WTS is a versatile system specially designed for the purpose of developing and testing new control strategies for wind energy conversion systems. The simulator includes two sub-systems; a torque controller which controls a 3-phase induction motor in order to simulate the wind turbine and wind speed generator which can simulate an actual wind speed. In order to make the proposed system working in real-time, two sub-systems are incorporated into one simulink block by using Real-time workshop. The performance of the proposed system is verified by considering various wind speeds.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.311-312
• /
• 2006

In this paper, a real-time stereoscopic image conversion method using a single frame from a 2-D image is proposed. If original image is too much dark, it is difficult to create correct luminance value. So stereoscopic image is generated after applied image enhancement algorithm to original image. The Stereoscopic image is generated by creating depth map using vertical position information and parallax processing.

• 한국컴퓨터정보학회논문지
• /
• 제21권5호
• /
• pp.57-64
• /
• 2016

In this paper, we propose the design of railway safety common data model to provide common transformation method for collecting data from railway facility fields to Real-time railway safety monitoring and control system. This common data model is divided into five abstract sub-models according to the characteristics of data such as 'StateInfoMessage', 'ControlMessage', 'RequestMessage', 'ResponseMessage' and 'ExtendedXXXMessage'. This kind of model structure allows diverse heterogeneous data acquisitions and its common conversion method to DDS (Data Distribution Service) format to share data to the sub-systems of Real-time railway safety monitoring and control system. This paper contains the design of common data model and its DDS Topic expression for DDS communication, and presents two kinds of data transformation case studied for verification of the model design.