• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.59-68
• /
• 2022

본 논문은 주어진 현품 영상과 도면 영상의 유사도를 비교하여 1:1 검증을 위한 방법을 제시한 것으로, CNN(Convolutional Neural Network) 기반의 딥러닝 모델을 두 개로 결합하여 Siamese Net을 구성하고 현품 영상과 도면 영상(정면도, 좌우 측면도, 평면도 등)을 같은 제품이면 1로 다른 제품이면 0으로 학습하며, 추론은 현품 영상과 도면 영상을 쌍으로 질의하여 해당 쌍이 같은 제품인지 아닌지를 판별하는 딥러닝 모델을 제안한다. 현품 영상과 도면 영상과의 유사도가 문턱 값(Threshold: 0.5) 이상이면 동일한 제품이고, 문턱 값 미만이면 다른 제품이라고 판별한다. 본 연구에서는 질의 쌍으로 동일제품의 현품 영상과 도면 영상이 주어졌을 때(긍정 : 긍정) "동일제품"으로 판별할 정확도는 약 71.8%로 나타났고, 질의 쌍으로 다른 현품 영상과 도면 영상이 주어졌을 때(긍정: 부정) "다른제품"으로 판별할 정확도는 약 83.1%를 나타내었다. 향후 제안한 모델에 파라미터 최적화 연구를 접목하고 데이터 정제 등의 과정을 추가하여 현품 영상과 도면 영상의 매칭 정확도를 높이는 연구를 진행할 예정이다.

• 산업경영시스템학회지
• /
• 제23권60호
• /
• pp.1-9
• /
• 2000

This paper deals with the difference between human sensibility collected from real product and that through graphic image(photographs and graphic images on CRT monitor) on the same automotive interior. The objective of this study is to verify the possibility that, If there are some restrictions in collecting human sensibility through real product directly, they can be overcome by using graphic image instead, making it easy to collect and analyze human sensibility so as to reflect consumers sensibility in the design of automotive interior, and also comparing the result between real product and graphic image on CRT monitor in order to confirm the potentiality of developing a remote human sensibility survey system through Internet. Therefore two experiments were conducted and the object for experiments was limited to automotive interior. The analysis results showed that there were significant differences between graphic image and real product in case of total interior and IPC(Instrument Panel Center) and no significant difference in case of display panel. Also, there were no significant difference when the subject group was female(housewife). To conclude, we can infer, in case of display panel, that it is possible to replace real product with graphic image to extract similar results on human sensibility and to collect human sensibility through Internet.

• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.7077-7092
• /
• 2014

본 연구에서는 자아이미지와 기업이미지와의 일치성 측면에서 기업이미지와 제품에 대한 태도와의 관계를 살펴보았다. 특히 실제적 이미지와 사회적 자아이미지로 구분하여, 일치성의 조절효과에 대해 살펴보았다. 연구결과를 사회적 기업의 책임활동이 기업이미지에 미치는 영향은 사회적 이미지에 미치는 영향요인 일부를 제외하고 유의한 영향을 미치는 것으로 나타났다. 그리고 실제적 자아이미지 일치성은 기업이미지 가운데 기업활동행위와 사회공헌행위가 제품태도에 미치는 영향을 조절하는 것으로 나타났다.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.168-173
• /
• 2011

In this paper, an optical image hiding technique using real-valued decoding key is proposed. In the embedding process, a each zero-padded original image placed in a quadrants on an input plane is multiplied by a statistically independent random phase pattern and is Fourier transformed. An encoded image is obtained by taking the real-valued data from the Fourier transformed image. And then a phase-encoded pattern, used as a hidden image and a decoding key, is generated by the use of multiple phase wrapping from the encoded images. A transmitted image is made from the linear superposition of the weighted hidden images and a cover image. In reconstruction process, the mirror reconstructed images can be obtained at two quadrants by the inverse-Fourier transform of the product of the transmitted image and the decoding key. Computer simulation and optical experiment are demonstrated in order to confirm the proposed technique.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.277-284
• /
• 2011

In tangible augmented reality (AR) environments for virtual prototyping, the user interacts with virtual products by manipulating tangible objects with his or her hands, but the user often encounter awkward situations in which his or her hands are occluded by augmented virtual objects, which reduces both immersion and ease of interaction. In this paper, we present how to resolve such hand region occlusion in order to enhance natural interaction and immersive visualization. In the AR environment considered, we use two types (product-type and pointer-type) of tangible objects for tangible user interaction with a virtual product of interest. Holding the tangible objects with his or her hands, the user can create input events by touching specified regions of the product-type tangible object with the pointer-type tangible object. We developed a method for resolving hand region occlusion frequently arising during such user interaction, It first detect hand region in a real image and refines the rendered image of the virtual object by subtracting the hand region from the rendered image, Then, it superimposes the refined image onto the real image to obtain an image in which the occlusion is resolved. Incorporated into tangible AR interaction for virtual prototyping of handheld products such as cellular phones and MP3 players, the method has been found by a preliminary user study that it is not only useful to improve natural interaction and immersive visualization of virtual products, but also helpful for making the users experience the products' shapes and functions better.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1367-1377
• /
• 2001

Cousumers developed self-image through clothing symbolic product for reveal one’self image. When consumers select particular brand of various brand in the market that congruent with one’self image. They have to continue image. In this purpose, the research model was constituted and the questionnaire was made, reviewing preceding studies on self-image, shopping orientation. As for the method of the research, 635 female consumers were the object for the data of this research. The major results of this were as follows: 1. The factor or real self-image was composed of four factors: the refined and deluxe image, casual and simple image, decorous and dressy image, quiet and feminine image. 2. The consumer with real self-image were classified three groups: the group of feminine and dressy image 288 persons, the group of casual image 167 persons and poor image 171 persons. In the consumer’s classified real purchasing brand-image the group of feminine and dressy image was given higher score at feminine and refined and deluxe image, the group of casual image was given higher score at casual and active. 3. The factor of shopping orientation was composed of four factors: pleasant, planned, loyal, recreational shopping orientation. The group of feminine and dressy image was given higher score at pleasant and planned shopping orientation, the group of casual image was given lower score loyal and confident shopping orientation than the other group.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.504-509
• /
• 1994

Recently SMT is used widely to place the SMD on bare board which is very small and highly integrated. And that is one of the issue directly in the electric products assembly process and especiallly in the field of optimizing electric product's performance, automatically tuning method which is highly demanded in the electronics industry. To tune product's performance, variable resistances's resistivity should be changed until it has good performance characteristics. In this paper to automatically regulate the 8mm camcoder's performance, it is proposed variable resistence's center position and orientation detection algorithm by image processing, which has very precise and accurate result. And we found optimal conditions which can have effects on image acquisition process. And real time processing is done by DSP to detect vr's center and orientation. This results make it possible to utilize proposed image processing algorithm and system directly in electronics industry.

• 감성과학
• /
• 제23권2호
• /
• pp.75-88
• /
• 2020

정보 기술 발전으로 인하여 제품 정보를 전달하는 방식이 오프라인과 2D중심에서 온라인과 3D로 이동하면서 효율적인 정보 전달을 위한 다양한 시도가 이루어지고 있다. 이러한 시도는 실물이 부재된 온라인 공간에서 단순히 제품의 정보를 전달하는 것에 그치지 않고 소비자에게 가상의 체험을 제공하면서 온라인 쇼핑의 다변화 및 활성화에 중요한 역할을 하고 있다. 360 제품 이미지는 피사체를 회전시켜 촬영하여 대상을 다양한 시점에서 입체적으로 볼 수 있는 실사 기반의 VR이다. 360 제품 이미지는 기존의 정지 이미지와 비교하여 대상물에 대해 풍부한 정보를 전달할 수 있다는 측면에서 주목받고 있다. 360 제품 이미지는 다양한 제작 요인에 의해 영향을 받으며, 이에 따라 이용자의 반응에 차이가 있으나 기술의 역사가 짧은 만큼 관련 연구 또한 미비하다. 따라서 본 연구에서는 360 제품 이미지의 제품의 형태와 소스 이미지의 수에 따라 변하는 이용자의 반응을 파악하고자 하였다. 이를 위해 온라인 쇼핑몰에서 많이 접할 수 있는 상품군 중 대표적인 제품들을 선정하여 360 제품 이미지를 제작하고 75인의 이용자를 대상으로 실험을 진행하였으며, 의미분별법을 적용한 실험 설문을 통해 360 제품 이미지에 대한 감성 반응을 분석하였다. 본 연구의 결과는 360 제품 이미지에 대한 수용자의 감성을 이해하고 파악하는데 기초 자료로 활용될 수 있을 것이다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.102-111
• /
• 1990

In this thesis, an optical bidirectional inner-product associative memory model using liquid crystal television is proposed and analyzed theoretically and realized experimentally. The LCTV is used as a SLM(spatial light modulator), which is more practical than conventional SLMs, to produce image vector in terms of computer and CCD camera. Memory and input vectors are recorded into each LCTV through the video input connectors of it by using the image board. Two multi-focus hololenses are constructed in order to perform optical inner-product process. In forward process, the analog values of inner-products are measured by photodetectors and are converted to digital values which are enable to control the weighting values of the stored vectors by changing the gray levels of the pixels of the LCTV. In backward process, changed stored vectors are used to produce output image vector which is used again for input vector after thresholding. After some iterations, one of the stored vectors is retrieved which is most similar to input vector in other words, has the nearest hamming distance. The experimental results show that the proposed inner-product associative memory model can be realized optically and coincide well with the computer simulation.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.92-99
• /
• 1999

The inspection unit which is developed and used in this study, is processed the shape data from the CCD camera to seek welding bite section shape, and then calculated as a real dimension from measuring the value of each inspection item. The reason of measuring with the real in this study is came out from the image method which used for a long time, which is extricated the characteristic as the dimension of pixel by recognize pixel. The measurement method of the section shape is that we decide the thresholding value after we drew the histogram to binarizate the object. After that, we make flat the object to get rid of the noise and measure the shape of welded part through the boundarization of the object. The shape measurement is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual dimension of the standard specimen and the dimension of image, to measure the ratio between the actual product and the camera image. The inspection algorithm which estimates the quality of welded product is developed and also, the software GUI(Graphic User Interface) which processes the automatic test function of the inspection system is developed. We make the foundation of the inspection automatic system and we will help to apply other welding machine.