• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.148-152
• /
• 2008

Coated filters were developed to replace the glass impinger methods that use reagent solutions. The purpose of this study was to simultaneously measure nitrogen dioxide ($NO_2$) and respirable suspended particles (RSP) by a filtration method with a cyclone connected to a pump. A first pre-filter for RSP and second filter for $NO_2$, which was soaked in a TEA (Triethanolamine) solution, were loaded into a filter cassette with a pump flow rate of 1.7 l/m. After sampling, the TEA soaked filter was removed from the cassette, placed in a large test tube (10 ml), mixed, and allowed time to develop. The absorbance (abs) of the diazo compound of the $NO_2$ and N-(1-Napthylethylenediamine dihydrochloride) in the color reagent was measured at 545 nm on a spectrophotometer. The collection efficiency(%) of $NO_2$ by each 3 filter soaked in TEA solution and used in the cyclone with a pump flow rate 1.7 l/m was $89{\pm}3%$ and the correlation coefficient between the true $NO_2$ concentration and that determined by the TEA soaked filters was 0.993(p<0.001).

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.184-188
• /
• 2012

Alcohol components are illegally mixed with petroleum products for tax evasion purposes, but this degrades vehicle performance. The alcohol content in petroleum fuel can be analyzed by gas chromatography. However, this technique requires a long analysis time and is expensive. $CrO_3$, also known as Jones reagent, changes color upon reaction with an alcohol. In this study, therefore, we analyze alcohol contents in vehicle fuel by using $CrO_3$ aqueous solution.

• Journal of Nutrition and Health
• /
• v.15 no.1
• /
• pp.9-14
• /
• 1982

The present paper describes a colorimetric method of determining the free and total unsaturated fatty acids in animal tissues. The procedure is based in three steps on the following principles : First step is that the tissue homogenates are extracted in chilled acetone in order to eliminate the interfering substance, such as phospholipids, sulfatides and proteins. At next step, after centrifugation acetone layer is decanted and evaporated to dryness. Then the extract is shaken with heptane to solve in the solvent. That the characteristic nature of copper salts of unsaturated fatty acids are freely soluble in heptane and those of saturated acids are not is the bases of separating one from another. Thus unsaturated fatty acids can be isolated in heptane as their salts from saturated acids and other lipid mixture by shaking with copper reagent. Finally the yellowish brown color developed by adding color reagent (0.2% sodium diethyldithiocarbamate in n-butanol solution) which reacts with the copper salts of the acids and produces the color is measured colorimetrically.

• YAKHAK HOEJI
• /
• v.45 no.1
• /
• pp.34-38
• /
• 2001

The Phellodendri Cortex of Phellodendron amurense (Rutaceae) is known to contain a number of isoquinoline alkaloid, and berberine, palmatine, jateorrhizine, phellodendrine and magnoflorine are the major constituents of protoberberine alkaloids. For the determination of protoberberine alkaloids from Phellodendri Cortex and berberine chloride from the preparation, the new spectrophotometric method was developed with a simple and selective sample clean-up using thiocyanatocobaltate[II] complex ion. Samples were extracted with 0.1 mM hydrochloric acid, potassium biphthalate reagent, thiocyanatocobaltate reagent and 1.2-dichloroethane for 60 min. The absorbance of protoberberine alkaloid complexes in 1.2-dichloroethane solution was measured at 625 nm. Calibration curve for berberine was linear over the concentration range of 0.05~0.30 mg/ml 1.2-dichloroethane. The method proved to be rapid, simple and reliable for the determination of protoberberine alkaloids from Phellodendri Cortex and berberine chloride from the preparation.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.245-252
• /
• 2018

The rose bengal reagent, based on the phase transfer catalysis technique, is a calcium-targeting reagent that forms an insoluble salt that does not dissolve in a neutral or basic solution. It is expected to be effective in developing a latent fingerprint in a wet sample. However, many previous studies did not observe the fluorescence of the developed fingerprints, nor were the proposed methods of producing the reagents the optimal develop conditions. The aim of this study was to investigate the optimum reagent composition of rose bengal by varying the concentration of rose bengal dye and phase transfer catalyst based on maximum emission fluorescence of rose bengal. As a result, it was confirmed that rose bengal and surfactant concentration were the most effective when 0.01M: 0.008M, respectively.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.483-494
• /
• 1988

The adsorption behavior of aromatic acids on Amberlite XAD-4 resin was investigated by measuring the distribution coefficient by batch method. The adsorption of solutes on XAD-4 was affected by the several factors such as, analyte concentration, the pH of solution and concentration of pairing ion. The enhanced adsorption of solutes on XAD-4 in the presence of tetraalkylammonium salt as an ion pairing reagent, referred to as ion interaction, was suggested to follow a double layer model where the pairing ion occupies a primary layer at the adsorbent while the solute anion and other anions in the system comlpete for the secondary layer. Therefore, the ability of an ion pairing reagent to enhance solute adsorption depended significantly on the type and concentration of counter-ion and co-anion accompanying the ion pairing reagent or salt used for ionic strength control. In addition, a good linear relationship between the logarithm of capacity factors measured by batch and elution method as a function of the concentration of ion pairing reagent and methanol can be used to predict the retention in elution method on the basis of capacity factors measured by batch method.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.463-471
• /
• 2019

Tapes are usually used in violent crimes and may contain important evidence. Separating adhesive side should be preceded to collect these evidence. In this study, we researched a novel dual-purpose reagent that can separate the tape without damaging and develop the fingerprints on porous surface when the tape is attached to A4 paper. As a result, the reagent of 1:2 ratio of 1,2-IND stock solution and HFE-7100 can separate without damaging the adhesive surface and develop fingerprints on separated A4 paper.

• Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.174-180
• /
• 2005

Nano-sized iron was synthesized using borohydride reduction of $Fe^{3+}$ in aqueous solution. A wide range of synthesis conditions including varying concentrations of reagents, reagent feeding rate, and solution pH was applied in an aqueous system under anaerobic condition. The reactivity of nano-sized iron from each synthesis was evaluated by reacting the iron with TCE in batch systems. Evidence obtained from this study suggest the reactivity of iron is strongly dependent on the synthesis solution pH. The iron reactivity increased as solution pH decreased. More rapid TCE reduction was observed for iron samples synthesized from higher initial $Fe^{3+}$ concentration, which resulted in lower solution pH during the synthesis reaction. Faster feeding of $BH_4^-$ solution to the $Fe^{3+}$ solution resulted in lower synthesis solution pH and the resultant iron samples gave higher TCE reduction rate. Lowering the pH of the solution after completion of the synthesis reaction significantly increased reactivity of iron. It is presumed that the increase in the reactivity of iron synthesized at lower pH is due to less precipitation of iron (hydr)oxides or less surface passivation of iron.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.555-561
• /
• 2003

The self-assembled monolayer coating of octadecyltrichlorosilane (OTS) on the silicon based MEMS was investigated and surface characteristics were considered as a function of coating conditions and reagent composition. The sulfuric peroxide mixture (SPM) solution was used to form -OH group which caused the hydrophilic characteristic on silicon surftce. Highest hydrophilicity was obtained by SPM solution with 85% acid content at room temperature. OTS was applied on the silicon surface by means of self-assembled monolayers (SAMs) coating. It was found that sol-gel reaction was took place between -OH group on the silicon surface and -Cl group in OTS. As a result, the contact angle increased due to the increase of hydrophobicity by Si-O bonding of SAMs. Sol-gel reaction could be controlled by coating conditions as well as reagent composition in OTS coating solution.

• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.122-127
• /
• 2021

A mixture of polyvinylpyrrolidone and 1,2-indanedione (PVP-IND) is known to be the best reagent for developing latent fingerprints deposited on the surface of a thermal paper. However, no study has evaluated whether PVP-IND could enhance fingerprints in blood deposited on the surface of thermal paper. Therefore, in this study, the ability of PVP-IND to enhance the fingerprints in blood was investigated. Furthermore, aqueous amido black solution, which is known to be the best reagent for enhancing fingerprints in blood deposited on the surface of thermal paper, was used for comparison with PVP-IND. Therefore, while enhancing the fingerprints in diluted blood, PVP-IND enhanced the quality of fingerprints compared to aqueous amido black solution. The ridge diffused when the undiluted fingerprints in blood were enhanced with PVP-IND because PVP reacted with amino acids in blood; however, amido black solution yielded better results. When treated with PVP-IND, it is presumed that the ridge diffused due to the reaction of PVP and amino acids contained in the blood.