• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.137-147
• /
• 2023

Shoushili was the official calendrical method promulgated in 1280 CE by the Yuan dynasty. It contains a list of the angular spans in right ascensions for the 28 lunar lodges. They are known to have been measured by Guo Shoujing with his advanced instruments with an unprecedented precision or reading error of 5'. Such precise data are useful to determine their observational epoch with an error range which is narrow enough to pinpoint on which historical occasion they were observed. Using the precise SIMBAD data based on eDR3 of GAIA and carefully identified determinative stars and considering the precession of equinoxes and proper motions, we apply linear regression methods to those data and obtain the observational epoch of 1271 ± 16 CE and the measurement error of 4.1'. We also have polar distances corresponding to declinations written in another manuscript of the Ming dynasty. Since the two data sets have similar significant digits, they were suggested to have the same origin. However, we obtain their observational epoch of 1364±5 CE and the measurement error of 5.7'. They must have been measured with different instruments and on a different occasion from the observations related to Shoushili. We review the history of the calendrical reform during the 13th century in the Yuan dynasty. We conclude that the observational epoch obtained from lodge spans in Shoushili agrees with the period of observations led by Guo Shoujing or 1276-1279 CE, which is also supported by the fact that the ecliptic lodge span values listed in Shoushili were calculated from the equatorial lodge spans.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.433-437
• /
• 1988

Direct measurement of the relative position between the end effector of robot and moving objects reduces difficulties caused by the joint encoder reading and transformation. For those purpose, the on-line sensing method using PSD sensor was developed in this paper. The sensor was calibrated on the precision table. Then, the relative position of a moving objects on the conveyor was measured while the robot was tracking the one.

• Journal of the Ergonomics Society of Korea
• /
• v.7 no.1
• /
• pp.31-37
• /
• 1988

This paper designs, in the teleoperation task, the world coordinate system by the functional analysis of each of the robot joint so that the human operator performs easily the task. Also, it constructs the heuristic rules of the equal motion line coordinates for the position and the posture control of the robot within the knowledge base so that the robot hand reaches-possibly in any position of the robot's work space. As shown in the result of the experiments. the coordinate reading is easy because the work station is displayed to the high resolution by using the superimposer of the motion analysing computer system. Also. the task burden of the human operator reduces and the error recovery time reduces because the coordinates of the object is obtained just by touch using the digitizer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.1
• /
• pp.14-22
• /
• 1983

The Bourdon tube pressure gauge is the most widely used primary detector for pressure in various kinds of fields recently. However in many cases lots of difficulties are encountered in telemetering, measuring the continuously changing pressure and recording as time goes by, etc. In this paper a Bourdon tube of flat-oval section is considered. On the basis of Wolf's theory, the very sensitive places are selected on the tube and full bridge arrangement is used. Then all of the characteristics are examined in order to use the pressure transducer practically into which the pressure gauge is converted. From the results, the error in meter reading is about $\pm$3% F.S., on the other hand, when measured with strain gauge, the error is within $\pm$1% F.S.. Also external acceleration on Bourdon tube hardly affect practical use.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.833-839
• /
• 2002

As the demand for slim laptops requires low-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method for anti-vibration mechanism with respect to the existing servo gain plot. Thismethod verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.1-6
• /
• 2004

Measurements of circular motion accuracy of NC lathe have achieved with ball bar systems proposed by Bryan, but the ball bar systems have ifluenced on the measuring data by way of the accuracy of the balls and the contacts of balls and bar seats. Therefore in this study, error data during of circular motion of ATC(Automatic Tool Changer) of NC lathe will be acquired by reading zx plane coordinates using two optical linear scales. Two optical linear scales of measuring unit are fixed on z-x plane of NC lathe, and the moving part is fixed to ATC and then is made to receive data of coordinates of the ATC at constant time intervals using tick pulses comming out from computer. And then, error data files of radial direction of circular motion are calculated with the data read, and the aspect of circular motion are modeled to plots, and are analysed by means of statistical treatments of circularity, means, standard deviations etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.215-219
• /
• 2014

In holographic data storage (HDS), a high transmission rate is accomplished through the use of a charge coupled device array for reading two-dimensional (2D) pixel image data. Although HDS has many advantages in terms of storage capacity and data transmission rates, it also features problems, such as 2D intersymbol interference (ISI) by neighboring pixels and interpage interference (IPI) by multiple images stored in the same holographic volume. Modulation codes can be used to remove these problems. We introduce a 2D 8/9 error-correcting modulation code. The proposed modulation code exploits the trellis-coded modulation scheme, and the code rate is larger (about 0.889) than that of the conventional 6/8 balanced modulation code (an increase of approximately 13.9%). The performance of the bit error rate (BER) with the proposed scheme was improved compared with that of the 6/8 balanced modulation code and the simple 8/9 code without the trellis scheme.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.1-7
• /
• 1975

In this paper, a method of writing and reproducing high density data with ordinary Audio cassette deck is discribed. In writing, the data N or NRZ code are modulated into PM code to take the positive code N(1) and the negative code N(0) are taken from the complement of the NRZ code, each of which are written into 2 channel track. In reading, the error corrected and the clock pulse can be generated from the reading pulse itself. Also, without modifying the interior circuit of the deck it is possible to use the deck in both the data and audio by adapting a few simple circuits. Over the range of 25HZ-4KHZ, it was possible to write and reproduce at the speed of 787 bps transmission rate.