• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1619-1624
• /
• 2012

If multiple Tags in the RFID System transmit their IDs to the Reader at the same time, tag identification time is delayed due to collisions. Therefore, to reduce the reader's identification time, an efficient anti-collision technology is needed. In this paper, we propose a hybrid anti-collision method based on the QT and DFSA. Then, the performances of proposed method are compared with the existing method through extensive simulations.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2012

Collisions between tags greatly reduce the identification speed in radio frequency identification (RFID) systems and increase communication overhead. In particular for an active RFID system, tags are powered by small batteries, and a large number of re-transmissions caused by collisions can deteriorate and exhaust the tag energy which may result in missing tags. An efficient collision-free arbitration protocol for active RFID systems is proposed in this paper. In this protocol, a new mechanism involving collision detection, collision avoidance, and fast tag access is introduced. Specifically, the pulse burst duration and busy-tone-detection delay are introduced between the preamble and data portion of a tag-to-reader (T-R) frame. The reader identifies tag collision by detecting pulses and transmits a busy tone to avoid unnecessary transmission when collision occurs. A polling process is then designed to quickly access the collided tags. It is shown that the use of the proposed protocol results in a system throughput of 0.612, which is an obvious improvement when compared to the framed-slotted ALOHA (FSA) arbitration protocol for ISO/IEC 18000-7 standard. Furthermore, the proposed protocol greatly reduces communication overhead, which leads to energy conservation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.53-63
• /
• 2008

Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.99-108
• /
• 2010

RFID(Radio Frequency IDentification) is a technology that automatically identifies objects containing the electronic tags by using radio wave. When there are some tags in the domain of the RFID reader, the mechanism that can solve a collision between the tags occurs is necessary. The multi tag identification problem is the core issue in the RFID and could be resolved by the anti-collision algorithm. However, RFID system has another problem. The problem id user information security. Tag response easily by query of reader, so the system happened user privacy violent problem by tag information exposure. In the case, RFID system id weak from sniffing by outside. In this paper, We study of security robustness for tree-walking algorithm, query tree algorithm and advanced query tree algorithm of tree based memoryless algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.358-364
• /
• 2007

RFID, Radio Frequency Identification, technology is a contactless automatic identification technology using radio frequency. For this RFID technology to be widely spread, the problem of multiple tag identification, which a reader identifies a multiple number of tags in a very short time, has to be solved. Up to the present, many anti-collision algorithms have been developed in order to solve this problem, and those can be largely divided into ALOHA based algorithm and tree based algorithm. In this paper, two new anti-collision algorithms combining the characteristics of these two categories are presented. And the performances of the two algorithms are compared and evaluated in comparison with those of typical anti-collision algorithms: 18000-6 Type A, Type B, Type C, and query tree algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.501-509
• /
• 2010

In this paper, the interference avoidance performance of the RFID reader with the compressive receiver was analyzed. In the environment of the multiple dense readers operating, the recognition rates of the conventional RFID reader and the proposed RFID reader with the compressive receiver were measured and compared. The recognition rate of the proposed reader was improved more than 2.7 times compared to the conventional reader. Especially, in the environment of two proposed RFID readers operating simultaneously, little degradation of the recognition rate was observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.814-821
• /
• 2005

When there are many tags using the same frequency around the reader in RFID system, they disturb each other and in the end their response cannot be received by the reader. To solve this disturbance and fast identify the tags, the anti-collision algorithm, which is the core technology in RFID system, is needed. We propose two ALOHA-type Dynamic Framed Slotted ALOHA(DFS-ALOHA) algorithms using Dynamic Slot Allocation(DSA), which dynamically allocates the frame size in accordance with the number of tags and Tag Estimation Method(TEM), which estimates the number of tags around the reader. We also compare the performance of the proposed DFS-ALOHA algorithms with that of the conventional Framed Slotted ALOHA (FS-ALOHA) algorithms and the algorithms proposed by Vogt using OPNET simulation. According to the analysis, the two proposed DFS-ALOHA algorithms(DFS-ALOHA I and DFS-ALOHA II) show better performance than the conventional ALOHA-based algorithms regardless of the number of tags. Although the two proposed DFS-ALOHA algorithms show the similar performance, BFS-ALOHA ll is better because it is easier to be implemented in the system and the complexity is lower.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.299-300
• /
• 2008

In this paper, we propose Adaptive Group Separation(AGS) algorithm for efficient RFID system. AGS algorithm determines the optimized initial prefix size m, and divides the group of ��$2^m$. A reader requests the group and searches the tag ID. If a tag collision occurred, reader adds a one bit, '0' or '1' at first bit of collision point. As a result, we observe that transmitted data bits and the recognition time are decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.17-26
• /
• 2005

RFID(Radio Frequency IDentification) is a technology that automatically identifies objects attached with electronic tags by using radio wave. For the implementation of an RFID system, an anti-collision algorithm is required to identify several tags within the RFID reader's range. Few researches report the performance trade-off among anti-collision algorithms in terms of the communications traffic between the reader and tags, the identification speed, and so on. In this paper, we analyze both tree based memoryless algorithms and slot aloha based algorithms that comprise of almost every class of existing anti-collision algorithms. To compare the performance, we evaluated each class of anti-collision algorithms with respect to low-cost RFID system with 96-bit EPC(Electronic Product Code). The results show that the collision tracking tree algorithm outperforms current tree based and aloha based algorithms by at least 2 times to 50 times.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.41-48
• /
• 2006

An anti-collision algorithm is very important in the RFID system because it decides tag identification time and tag identification accuracy. We propose improved anti-collision algorithms using Bin slot in RFID system. In the proposed algorithms, if the reader memorizes the Bin slot information, it can reduce the repetition of unnecessary PingID command and the time to identify tags. If we also use ScrollA11ID command in the proposed algorithm, the reader knows the sequence of collided E bits. Using this sequence, the reader can reduce the repetition of PingID command and tag identification time. We analyze the performance of the proposed anti-collision algorithms and compare the performance of the proposed algorithms with that of the conventional algorithm. We also validate analytic results using simulation. According to the analysis, for the random tag n, comparing the proposed algorithms with the conventional algorithm, the performance of the proposed algorithms is about $130\%$ higher when the number of the tags is 200. And for the sequential tag ID, the performance of the conventional algorithm decreases. On the contrary, the performance of the proposed algerian using ScrollA11ID command is about $16\%$ higher than the case of using random tag ID.