• 한국표면공학회지
• /
• 제27권3호
• /
• pp.143-148
• /
• 1994

Effects of process variables of HCD ion plating on the film composition of Ti(C, N) were analyzed. The mole ratio of carbon to nitrogen and that of non-metal to titanium in the film primarily depend on the partial pressure ratio of ($C-2H_2$/ $N_2$) and total reactive gas pressure, respectively. The amount of nonmetallic com-ponents increases in nonlinear fashion as the total gas pressure due to the different reactivity of $C-2H_2$ and $N_2$ gases with Ti. The nonmetallic components was saturated dwith nitrogen when the nitrogen gas was more than 60% of total reactive gas. These two process variables could be related systematically using the concept of effective pressure in which the difference of reactivity of each gas was normalized.

• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.286-296
• /
• 2007

Ozone creation potentials suited for Seoul metropolitan area was derived by utilizing the PAMS monitoring data and the source inventory. A simple box model with variable height was developed to calculate the incremental reactivity for all the ozone episode days in the year 2003 and 2004. RIR (Relative Incremental Reactivity) was introduced as a measure of contribution to ozone generation in the Seoul metropolitan area. RIR was defined as a function of ratio of VOC to $NO_x$ and therefore it addresses both VOC and $NO_x$ limited regime. For the days that more than 10 monitoring stations out of 27 monitoring station in Seoul recorded the daily maximum ozone concentrations higher than 70 ppb, toluene had the highest RIR value in all the type II and type III PAMS site and m/p-xylene followed with the second highest RIR value. Analyses using MIR (Maximum Incremental Reactivity) and POCP (Photochemical Ozone Creation Potential) instead of RIR also yields dominance of toluene and m/p-xylene in generating ozone concentrations to demonstrate the validity of RIR.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.72-79
• /
• 2014

Shaped charge(SC) ammunition is a weapon that penetrates directly the target by made jet from metal liner on impacting at a target. In SC, the liner occupies significantly important role causing an explosion and penetration of the target. The Al-Ni composite coating was deposited on copper liner in a solid state via kinetic spraying to improve the explosive force. The mechanical properties, reactivity and microstructure were investigated to confirm the possibility of kinetic sprayed Al/Ni composite coating as a reactive liner material. Reactive liner using Al/Ni composite exhibited much enhanced reactivity than pure copper liner due to Self-propagating High-temperature Synthesis (SHS) reaction with significantly improved adhesive bond strength. Especially, among the Al/Ni composite coatings, AN11 (the Al versus Ni atomic percent ratio is 1:1) showed the greatest reactivity due to its widest reaction area between deposited Al and Ni.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.96-104
• /
• 2015

Reactivity of commercial WGS catalyst and four new catalysts(RMC-3, PC-73, PC-67SU, PC-59) manufactured with various compositions by Korea Electric Power Research Institute(KEPCO RI) were compared to select suitable WGS catalyst for SEWGS system. Steam/CO ratio, gas velocity, flow rates of syngas, and temperature were considered as operating variables. As a result, commercial catalyst showed the highest CO conversion and RMC-3 catalyst showed also high CO conversion. Therefore, commercial and RMC-3 catalysts were selected as applicable catalysts. However, PC-73 catalyst showed low CO conversion at low temperature($200^{\circ}C$) but showed good reactivity at high temperature($225{\sim}250^{\circ}C$), and therefore, PC-73 catalyst was selected as applicable catalyst for high temperature operation. Continuous operations up to 24 hours for those three catalysts(commercial, RMC-3, PC-73) were conducted to check reactivity decay of catalysts. All three catalysts maintained their original reactivity.

• Composites Research
• /
• 제28권6호
• /
• pp.395-401
• /
• 2015

본 연구에서는 자가손상보수에 적용되는 Grubbs' catalyst의 열안정성과 자가치료제와의 반응성을 조사하였다. 이를 위해 제조사에서 공급된 4종류를 고려하였으며 제조사에서 공급받은 상태와 기계적으로 분쇄시킨 상태로 시험하였다. 자가치료제는 Dicyclopentadiene (DCPD)과 5-ethylidene-2-norbonene (ENB)을 적절한 비율로 혼합한 4종류를 고려하였다. 촉매의 열안정성을 조사하기 위해 시차주사 열량측정장치를 통해 온도에 따른 열흐름 변화를 측정하였다. 자가치료제와의 반응성을 평가하기 위해 촉매와 혼합된 자가치료제의 반응열을 측정하였다. 이때 촉매는 자가치료제와 반응할 때의 최대온도와 최대온도 도달시간을 고려하여 Fluka Chemika Grubbs' catalyst를 적용하였다. 연구결과에 따르면 촉매는 제조사에 따라 다른 형상을 나타내며 입자의 크기가 작은 촉매가 자가치료제와 높은 반응성을 나타내었다. ENB의 혼합비가 높은 자가치료제가 촉매와 혼합되면 최대온도는 증가하고 최대온도 도달시간은 빨라졌다. 또한 촉매의 양이 많을수록 최대온도는 높아지고 최대온도 도달시간은 빨라졌다. 촉매의 열안정성과 자가치료제와의 반응성을 고려할 때 0.5 wt% 촉매와 D3E1 자가치료제가 자가손상보수를 위한 최적 조건임을 알 수 있었다. 마지막으로 노출된 분위기 온도에 따라 촉매에 열분해가 발생할 수 있기 때문에 촉매가 열안정성을 갖는 온도보다 높은 온도에 노출되지 않도록 하여야 한다.

• 폴리머
• /
• 제39권1호
• /
• pp.13-22
• /
• 2015

A new methacrylate copolymer that includes chalcone as a side group, poly(4-methacryloyloxyphenyl-4'-methoxystyryl ketone-co-styrene) was synthesized by free radical copolymerization. FTIR and $^1H$ NMR spectroscopic techniques were used to characterize the homopolymers and copolymers. The copolymerizations were carried out to high conversions. Copolymer compositions were established by $^1H$ NMR spectra analysis. The monomer reactivity ratios for copolymer system were determined by the linearized Kelen $T{\ddot{u}}d{\ddot{o}}s$, and Extended Kelen $T{\ddot{u}}d{\ddot{o}}s$ methods and a non-linear least squares method. The molecular weights and polydispersity index of copolymers were measured by using the gel permeation chromatography (GPC). The effect of copolymer compositions on their thermal behavior were studied by differential scanning calorimetry and thermogravimetric analysis methods. The optical properties of the resulting copolymer were also investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권11호
• /
• pp.2880-2900
• /
• 2012

Robot programming often sparks students' interest in programming, but it is not easy for them to program both procedure and reactivity of robot movements that are essential requirements. In this study, we reviewed in detail a new programming language, State-Based Squeak. It allows novice students to implement both procedure and reactivity of robots easily. The effect of this new language on robot programming education was also examined using a group of 28 middle school students. According to the results of analyzing the students' understanding of programming, reading and programming abilities the group that used State-Based Squeak (the experimental group) showed a higher completion ratio than the other (control) group. The significance of this study is that a robot programming language has been developed that addresses the concepts of both procedure and reactivity in such a way that middle school students can more easily learn how to program robots, something that is often difficult to attempt even for professional programmers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.435-442
• /
• 2000

Batch test and column test were performed to develop the design factors for permeable reactive barriers(PRBs) against ammonium and heavy metals, Clinoptilolite, a kind of natural zeolites having excellent cation exchange capacity(CEC), was choosen for the reacting materials through the ion-exchange mechanism. In the batch test, the reactivity of clinoptilolite for ammonium, lead, and copper was examined varying the initial concentration of contaminants(ammonium: 20, 40, 80 ppm, heavy metals: 10, 20, 40 ppm) and the particle size of clinoptilolites(0-0.15, 0.42-0.85, 1-1.25 mm). The reactivity is increasing as the initial concentration decrease and particle size decrease. In the column test, the permeability and the reactivity of the specimens were examined using flexible-wall permeameter. Specimens were made of clinoptilolite and Jumunjin-sand with 20 : 80 weight ratio varying particle size of clinoptilolite. The maximum permeability(1${\times}$10$\^$-4/-5${\times}$10$\^$-5/cm/s) was achieved in the specimen made of 0.42-0.85 mm clinoptilolite and sand.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.614-619
• /
• 2008

Copolymers of phenyl alkyl acrylates/methacrylates are used clinically as soft materials for the foldable intraocular lens (IOL) to treat cataracts. In this study, copolymers of 2-phenylethyl acrylate (PEA) and 2-phenylethyl methacrylate (PEMA) of various compositions were prepared using free radical polymerization in solution. The composition of the copolymers was determined by $^1H$-NMR analysis. The reactivity ratios of the monomers were calculated using the conventional Fineman-Ross or Kelen-Tudos method. The reactivity ratio of PEA ($r_1$) and PEMA ($r_2$) were estimated to be 0.280 and 2.085 using the Kelen-Tudos method, respectively. These values suggest that PEMA is more reactive in copolymerization than PEA, and the copolymers will have a higher content of PEMA units. The glass transition temperature ($T_g$) of the copolymers increased with increasing PEMA content. The molecular weight and polydispersity indices ($M_w/M_n$) of the polymers were determined by GPC. Overall, these results are expected to be quite useful in applications to foldable soft IOL materials.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1287-1300
• /
• 2017

Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.