• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.237-242
• /
• 1979

In order to improve hydration reactivity of blast furnace slag, it's composition was changed by adding of CaO. The slags were quenched in water at 1,400℃. Hydration reactivityof modified slags was studied by x-ray diffractometer, conduction calorimeter and so on. Experimental results were summarized as follows. 1. Glass content and hydration reactivity of slag depend significantly on quenching temperature of the slag melt. To enhance the reactivity, slag melts which belongs to Frenkel-type liquid, must be quenched above 1,300℃. 2. Vitrification of slag melts was confirmed as CaO/SiO2 ratio increased up to 1.57 with flux, 1.51 without flux, also their hydration reactivity was improved.

• 폴리머
• /
• 제24권2호
• /
• pp.168-173
• /
• 2000

자유 라디칼 개시제인 2,2'-azobisisobutyronitrile (AIBN)을 사용하여 1,4-dioxane 용매하에서 N-isopropylacrylamide (NIPAAM)와 methyl methacrylate (MMA)를 공중합하였다. 온도에 따른 NIPAAM과 MMA의 반응성비를 알아보기 위해 각각 50, 60, 7$0^{\circ}C$에서 중합하여 전환율이 10 wt%이하가 되도록 반응을 정지시켰다. 단량체 반응성비는 Finemann-Ross법으로 구하였으며, 그 값은 5$0^{\circ}C$에서는 ${\gamma}$$_2$=0.259, ${\gamma}$$_2$=2.782, 6$0^{\circ}C$에서는 ${\gamma}$$_1$=0.271, ${\gamma}$$^2$=0.819, 그리고 7$0^{\circ}C$에서는 ${\gamma}$$_1$=0.286, ${\gamma}$$_2$=2.915로 나타나, 반응온도가 높아질수록 ${\gamma}$$_1$, ${\gamma}$$_2$ 값이 증가함을 알 수 있었다. 또한 반응온도와 반응성비와의 관계로부터 활성화에너지의 차를 구할 수 있었으며, 그 결과 반응성비는 온도 의존성이 있는 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.503-511
• /
• 2018

There have been many studies of combustion in the circulating fluidized bed. However, little study is available for combustion of wood pellet together fed with wood chip. The mixed ratio of two fuels is an useful information when thermal power company would receive the Renewable Energy Portfolio Standard (RPS) from government. In this study, the combustion behavior and kinetics of such biomass fuels are evaluated using fluidized bed reactor and thermogravimetric analyzers. The mixing ratio of wood chip relative to wood pellet was varied at different temperatures. The results show that a combustion reactivity changed significantly at the wood chip mixing ratio of 40%, particularly at low temperature condition.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.93-100
• /
• 2002

For natural gas and LPG fuel, measurements on the concentrations of individual exhaust hydrocarbon species have been made as a function of air-fuel ratio in a 2-liter four-cylinder engine using a gas chromatography. NMHC in addition to the species of HC, other emissions such as CO$_2$, CO and NOx were examined for natural gas and LPG at 1800rpm far two compression ratios (8.6 and 10.6). Fuel conversion efficiencies were also investigated together with emissions to study the effect of engine parameters on the combustion performances in gas engines especially under the lean bum conditions. It was found that CO$_2$ emission decreased with smaller C value of fuel, leaner mixture strength and the higher compression ratio. HC emissions from LPG engine consisted primarily of propane (larger 60%), ethylene and propylene, while main emissions from natural gas were mothane (larger than 60%), ethane, ethylene and propane on the average. The natural gas was proved to give the less ozone formation than LPG fuel. This was accomplished by reducing the emissions of propylene, which has relatively high MIR factor, and propane that originally has large portion of LPG. In addition, natural gas shows a benefit in other emissions (i.e. NMHC,NOx, CO$_2$and CO), SR and BSR values except fuel conversion efficiency.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.1-12
• /
• 2019

One of proposed Accident Tolerant Fuel (ATF) concept is fully ceramic micro-encapsulated fuel (FCMF). FCMF using uranium mononitride (UN) has better safety aspects than $UO_2$ pellet fuel although it might not have a better neutronic performance due to the presence of matrix and high neutron-induced interaction of $^{14}N$. Before implementing UN-FCMF technology in Small-PWR, further research must be taken place to make sure the proposed design of fuel assembly has inherent safety features and maintain the fuel performance. This study focusses on the neutronic analysis of UN-FCMF based fuel assembly using Serpent and SCALE codes. It is shown in the proposed fuel assembly design has inherent safety features with respect to the fuel temperature reactivity coefficient, void reactivity coefficient, and moderator temperature reactivity coefficient. It is noted that the use of FCMF leads to a lower ratio of burnup to $^{235}U$ enrichment ratio compared to the $UO_2/Zr$ fuel.

• 자원환경지질
• /
• 제30권2호
• /
• pp.175-183
• /
• 1997

The concrete structure can be easily damaged due to alkali-aggregates reaction. There are several methods to identify alkali reactivity of aggregates. The most reliable method is mortar-bar test, but it takes 3 to 12 months for whole test. The authors applied "rapid method" which takes only 7 days for this test. The result of this rapid method follows; expansion ratio of mortar bar for natural aggregates taken at the Youngsan River ranges from 0.197 to 0.489%, but that from Changseong Lake has low expansion ratio of 0.147%, which is below the limit of allowance, 0.168%. Those from the Seomjin River range from 0.173 to 0.22%, and those from the Keum River range from 0.078% to 0.111%. In the case of higher expansion ratio than 0.168%, aggregates must be used with cement containing low alkali content or adding material consuming the alkali content of cement, for example, fly ash and silica fume, etc.. Most of natural aggregates in Cheolla area have no problem in physical properties, particularly the abrasion ratio is below 40%, the limit of allowance. The natural aggregate from Cheolla area consists mostly of gneiss, granite and volcanic rocks. The major alkali reactive materials are quartz mineral with undulatory extinction in gneiss and granite, and amorphous silica in volcanic rocks. Even if a certain aggregate consists of the same kind of rocks and has similar rock composition each other, content of alkali reactivity material can be various, because rock formation is locally different according to temperature and pressure. Therefore every rock type must be physically and chemically identified before using for aggregates.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2133-2150
• /
• 2021

In this work, Esfahan light water subcritical reactor (ELWSCR) is analysed using experimental and theoretical diagnostic methods. Important neutronic parameters of the system such as prompt neutron lifetime, delayed neutron fraction, prompt neutron decay constant, negative reactivity of the core, fuel and moderator temperature coefficient of reactivity, and overall and local void coefficient of reactivity are estimated. Also, neutron flux distribution, reflector saving, water level effect, and lattice pitch of the core including operating point of the facility are studied in details. Theoretical results are calculated by MCNPX and measurements are performed utilizing zero power reactor noise method. Detailed descriptions of the results are explained in the text.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.81-89
• /
• 2018

Fuel blend technique is one of the most effective way of using biomass to replace the coal. Many studies on combustion characteristics with coal and biomass blends have been conducted. In this study, char reactivity and emission characteristics of coal (Suek) and biomass (EFB) blends has been investigated by TGA and DTF to evaluate the applicability of the pre-treated (torrefaction, ash removal technology) EFB to pulverized coal boiler. In all blending cases, char reactivity improved as the blending ratio increases (10, 20, and 30%), especially torrefied EFB blended at 30%. Also, unburned carbon decreased as the blending ratio increases in all types of EFB. NOx emission showed the increase and decrease characteristics according to the content of fuel-N of raw EFB and torrefied EFB. But the amount of NOx emission at ashless EFB blends is greater than that of Suek despite of lower fuel-N. It indicated that co-firing effect of using the pretreatment biomass fuel is relatively better than those of the untreated biomass fuel about char reactivity and emission characteristics.

• 대한화학회지
• /
• 제40권9호
• /
• pp.630-634
• /
• 1996

양배추 포스포리파제 D의 기질특이성을 조사하기 위해 아실 사슬길이가 틀린 코린 인지질을 사용하여 그 반응성을 검토하였다. 선택한 아실 사슬은 포화지방산 $C_8:0,\;C_{12}:0,\;C_{16}:0,\;C_{20}:0$이었다. 이들 인지질들의 반응성은 계면활성제 Sodium dodecyl sulfate의 농도에 따라 큰 영향을 받았으며, 아실 사슬길이가 길어짐에 따라 최적 PC : SDS의 농도비는 1:1.4, 1:2.2, 1:2.5, 1:3.6으로 나타났다. 이와 함께, 효소의 최적활성을 나타내는 온도도 길이가 길어짐에 따라 20$^{\circ}C$, 30$^{\circ}C$, 35$^{\circ}C$, 45$^{\circ}C$로 크게 변화하였다. 이와는 달리 최적 pH와 $Ca^{2+}$농도는 사슬길이에 따라 큰 영향을 받지 않았다. $V_{max}$ 값은 아실 사슬의 기질이 가장 커 가수분해가 잘 일어남을 보여주었으며 사슬길이가 길어질수록 반응속도는 감소하였다.

• 대한화학회지
• /
• 제24권1호
• /
• pp.64-72
• /
• 1980

새로운 acrylimide로서 N-acrylylpyrrolidone을 합성하였다. N-Acrylylpyrrolidone은 N-methacrylyl-lactam과는 다르게 homopolymerization을 열적으로도 함을 관찰하였다. Styrene과 N-acrylylpyrrolidone의 공중합시 각 monomer의 reactivity ratio를 구하였다. 그 결과 생성되는 copolymer는 pyrrolidone의 음이온 중합에 적절한 acyl-lactam function을 가지고 있음을 알았다.