• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.225-226
• /
• 2003

일시적 수용성 반응성 분산염료는 염료합성시에 분산제를 사용하지 않기 때문에 원가절감 및 밀링공정 생략에 의한 생산성 증대효과가 있다[1-2l. 또한 혼방섬유를 단일염료로 일욕에서 염색할 수 있기 때문에 공정단축의 효과, 염색공정시에도 분산제를 사용하지 않아도 되므로 조제절감 및 염색폐수의 환경문제 개선 둥의 장점이 있다. 3원색(yellow, red, blue)의 일시적 수용성 반응성 분산염료를 이용하여, Acetate/Nylon(A/N), Acetate/polyester(A/P), Polyester/Nylon(P/N) 혼방섬유를 일욕에서 염색하였으며, 염색성, 견뢰도 및 염색폐수의 환경성을 평가하였다. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.131-131
• /
• 2010

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.544-550
• /
• 2013

This work investigated the environmental application of an underwater dielectric barrier discharge plasma reactor consisting of a porous hydrophobic ceramic tube to the decolorization of an azo dyeing wastewater. The reactive species generated by the plasma are mostly short-lived, which also need to be transferred to the wastewater right after the formation. Moreover, the gas-liquid interfacial area should be as large as possible to increase the decolorization rate. The arrangement of the present wastewater treatment system capable of immediately dispersing the plasmatic gas as tiny bubbles makes it possible to effectively decolorize the dyeing wastewater alongside consuming less amount of electrical energy. The effect of discharge power, gas flow rate, dissolved anion and initial dye concentration on the decolorization was examined with dry air for the creation of plasma and amaranth as an azo dye. At a gas flow rate of $1.5Lmin^{-1}$, the good contact between the plasmatic gas and the wastewater was achieved, resulting in rapid decolorization. For an initial dye concentration of $40.2{\mu}molL^{-1}$ (volume : 0.8 L; discharge power : 3.37 W), it took about 25 min to attain a decolorization efficiency of above 99%. Besides, the decolorization rate increased with decreasing the initial dye concentration or increasing the discharge power. The presence of chlorine anion appeared to slightly enhance the decolorization rate, whereas the effect of dissolved nitrate anion was negligible.

• Membrane and Water Treatment
• /
• v.1 no.1
• /
• pp.49-60
• /
• 2010

In this study, response surface methodology (RSM) was performed in NF membrane process to evaluate the separation efficiency of membrane in the removal of salt and reactive dye by varying different variables such as pressure, temperature, pH, dye concentration and salt concentration. The significant level of both the main effects and the interaction were observed by analysis of variance (ANOVA) approach. Based on the statistical analysis, the results have provided valuable information on the relationship between these variables and the performances of membrane. The rejection of salt was found to be greatly influenced by pressure, pH and salt concentration whereas the dye rejection was relatively constant in between 96.22 and 99.43% regardless of the changes in the variables. The water flux on the other hand was found to be affected by the pressure and salt concentration. It is also found that the model predictions were in good agreement with the experimental data, indicating the validity of these models in predicting membrane performances prior to the real filtration process.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.111-121
• /
• 2020

The fouling of Nanofiltration membrane (NF) was examined using wastewater containing reactive black dye RB5 of 1500 Pt/Co color concentrations with 16890 mg/l TDS collected from El-alamia Company for Dying and Weaving in Egypt. The NF-unit was operated at constant pressure of 10 bars, temperature of 25℃, and flowrate of 420 L/min. SEM, EDX, and FTIR were used for fouling characterization. Using the ROIFA-4 program, the total inorganic fouling load was 1.07 mM/kg present as 49.3% Carbonates, 10.1% Sulfates, 37.2% Silicates, 37.2% Phosphates, and 0.93% Iron oxides. The permeate flux, recovery, salt rejection and mass transfer coefficients of the dye molecules were reduced significantly after fouling. The results clearly demonstrate that the fouling had detrimental effect on membrane performance in dye removal, as indicated by a sharp decrease in permeate flux and dye recovery 68%. The dye mass transfer coefficient was dropped dramatically by 34%, and the salt permeability increased by 14%. In this study, all the properties of the membrane used and the fouling that caused its poor condition are identified. Another study was conducted to regeneration fouled membrane again by chemical methods in another article (Abdel-Fatah et al. 2017).

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_3
• /
• pp.149-155
• /
• 2001

In recent years, rapid technological advances in the textile and dyeing industry have yielded benefits to society but have also generated new and significant environmental problems. The treatment alternatives applicable for the removal of color vary, depending upon the type of dye wastewater Advanced oxidation processes are considered to provide more permanent merits. One of these oxidation treatments attracting much attention is photocatalytic oxidation, which uses TiO$_2$ due to its non-toxic, insoluble liquid as well as a highly reactive nature under UV irradiation. This study sets out to demonstrate the effect of photocatalyst dosage, dye concentrations, pH and light intensity on color removal efficiency under aerobic conditions. The results of this study show Rhodamine B(RhB) was not decolorized when a dye solution was exposed only to air or treated by TiO$_2$ only In the presence of both TiO$_2$ and UV light, however, the presence of RhB decreased up to 95 % within 60minutes. The more addition TiO$_2$ and the more diluted dye solution, showed a higher removal rate.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.21-21
• /
• 2011

개인적 삶의 질 향상과 함께 사회적인 삶의 가치를 추구하여 인체친화적이며 동시에 환경 친화적인 제품 소비에 가치를 두는 LOHAS 트렌드의 영향으로 의류 제품에서는 소비자의 요구 수준에 맞춘 고급화, 고기능화된 의류 상품 및 소재 중심의 소비와 함께 친환경 소재, 리사이클 소재 등에 대한 관심이 증가하고 있다. 최근 Ramie 복합 소재는 이러한 트렌드에 적합한 대표적인 소재로서 고감성/웰빙 신섬유 제품 개발을 통해 신시장 개척이 가능한 아이템으로 주목받고 있다. 한편, Ramie는 땀에 대한 흡습성과 속건성이 우수하고 청량감이 있어 주로 여름 소재로 활용되어 왔으나 촉감이 좋지 못하고 광택성이 떨어지는 단점이 있어 이를 보완하기 위해 촉감이 좋고 광택성이 뛰어난 레이온 계열의 소재와 혼방하여 고급스럽고 환경 친화적인 의류소재로써 개발이 진행되고 있다. 본 연구에서는 이러한 레이온계 섬유 중에서 상품성이 modal 섬유 Tencel 섬유를 각각 혼방한 Ramie/Modal(28's,30's), Ramie/Tencel(28's) 복합소재의 반응성 염료에 대한 염색특성을 비교 고찰해 보았다. 실험은 Heterobifunctional type 반응성 염료 3종(Red, Yellow, Blue)을 이용하여 흡진 거동, 빌드업 특성, 겉보기 색상농도 등을 비교하였으며 1/1 standard 농도에서의 제반 견뢰도를 비교 평가하였다.

• Current Research on Agriculture and Life Sciences
• /
• v.12
• /
• pp.83-95
• /
• 1994

Fixation rate of reactive dyes on silk fibroin showed the same tendency to absorption rate. Fixation rate of Yellow 179 and Blue 71 was quite slow and Black 5, Blue 49, Blue 4, Blue 19 and Blue 21 was relatively fast. Weight increase by MAA graft polymerization onto filk fibroin was decreased, on the whole, according to the the increase of dye fixation, but weight increase of silk fibroin dyed with Blue 71 and Blue 21 was much higher than that of silk fibroin. And weight increase of silk fibroin dyed with Yellow 179 was similar to that of silk fibroin and in case of Blue 19, weight increase was about 12%, constantly. Weight increase of silk fibroin dyed with Blue 71 and Blue 21 was higher and the others were lower than of silk fibroin. And weight increase was diminished according as the dyeing temperature rises. The color was a little changed by MAA graft polymerization.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.32-32
• /
• 2011

염료의 포토크로미즘은 빛을 받았을 때, 염료의 분자구조가 변환되어 흡수파장이 달라지고 결과적으로 원래 색과 다른 색상을 나타내는 현상을 말한다. 대부분의 Golden yellow 색상을 나타내는 아조계 반응성염료는 Trans-Cis 간의 이성질체 전환을 통해 포토크로미즘 현상을 나타내며, 가역적으로 복색되기는 하지만 상업적으로 많은 문제와 불편을 초래한다. 한편 pyrazolone계 아조염료는 azo form 보다는 hydrazone form으로 더 많이 존재하는 것으로 알려져 있으며, 이로인해 상대적으로 Trans-Cis 이성질화가 잘 일어나지 않아 포토크로미즘 현상이 잘 일어나지 않을 것으로 기대된다. 이 연구에서는 3종의 pyrazolone계 golden yellow 반응성 염료를 합성하고, 합성한 염료를 면직물에 염색하여 염색성 및 견뢰도를 평가하였다. 또한 시판되고 있는 아조계 golden yellow 반응성 염료 4종을 선정하여 역시 염색성과 견뢰도 특성을 알아보았다. 그리고 7가지 염료의 광변색 특성을 조사하기 위해 포토크로미즘 평가방법인 ISO 105-B05법 및 이전 연구에서 제안된 광변색 평가방법을 사용하였다. ISO 105-B05법은 표준청색염포가 grey scale 4등급이 되는 시간을 구한 다음 이 시간의 1/4시간동안 조사한 후 포토크로미즘을 평가하는 것이며, 후자의 경우는 4시간동안 광조사된 시험편을 측색하고 시간에 따른 복색되는 정도를 평가한다. 합성한 pyrazolone계 염료들은 394-408nm의 최대흡수파장은 나타내었다. 7종의 yellow 반응성 염료들은 모두 면직물에 우수한 염색성 및 build-up성을 나타내었으며, 대체적으로 양호한 견뢰도를 얻었다. 또한 광변색 특성 평가결과 모든 염료들은 ISO 평가방법에 대하여 non-photochromic 특성으로 나타났으나, 다른 광변색 평가 결과 일부 염료들에 있어서 photochromic 특성이 있는 것으로 나타나 평가방법에 따라 차이를 보였다.