• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.13-17
• /
• 2006

The one-dimensional ZnO nanostructures prepared through thermal evaporation under various cooling down procedures by changing the flow rates of the carrier gas and the reactive gas were investigated. The nanorod structures were changed into the nanonail types with a broad head through the reduction of the flow rate of the carrier gas. The decrease of the reactive gas reduced the length of the nail heads due to the limited mass transport of reactive gas. The intensity ratio of the ultraviolet emission/green emission of photoluminescence was proportional to the length of the broad head showing a larger surface area. The vertically aligned nanostructures were grown along the [0001] direction of ZnO regardless of the aligned directions. The crystal direction of the nanostructures was determined by that of the initial ZnO crystal.

• 센서학회지
• /
• 제30권4호
• /
• pp.267-272
• /
• 2021

In this study, Ag was deposited to investigate its applicability as a surface-enhanced Raman scattering substrate after forming a grass-type black silicon structure through maskless reactive ion etching. Grass-structured black silicon with heights of 2 - 7 ㎛ was formed at radio-frequency (RF) power of 150 - 170 W. The process pressure was 250 mTorr, the O₂/SF₆ gas ratio was 15/37.5, and the processing time was 10 - 20 min. When the processing time was increased by more than 20 min, the self-masking of Si_xO_yF_z did not occur, and the black silicon structure was therefore not formed. Raman response characteristics were measured based on the Ag thickness deposited on a black silicon substrate. As the Ag thickness increased, the characteristic peak intensity increased. When the Ag thickness deposited on the black silicon substrate increased from 40 to 80 nm, the Raman response intensity at a Raman wavelength of 1507 / cm increased from 8.2 × 10³ to 25 × 10³ cps. When the Ag thickness was 150 nm, the increase declined to 30 × 10³ cps and showed a saturation tendency. When the RF power increased from 150 to 170 W, the response intensity at a 1507/cm Raman wavelength slightly increased from 30 × 10³ to 33 × 10³ cps. However, when the RF power was 200 W, the Raman response intensity decreased significantly to 6.2 × 10³ cps.

• 성인간호학회지
• /
• 제18권4호
• /
• pp.660-667
• /
• 2006

Purpose: The purpose of this study was to investigate the effects of 12-week brisk walking and brisk walking plus diet program on C-Reactive Protein(CRP) in middle-aged obese hypertriglycemic($triglyceride{\geq}150mg/d{\ell}$) Korean women. Method: The subjects were 16 obese ($BMI{\geq}25$) hypertriglycemic middle-aged women (7 for brisk walking group, 9 for brisk walking plus diet group) who participated in a health promotion program at one public health center. Initially the brisk walking intervention consisted of walking for 20 minutes/day at an intensity of 40 to 50% of heart rate reserve(HRR) for 3 days/week and progressed to 50 minutes/day, 60 to 70% of their HRR, and 6 days/week. The diet intervention consisted of 60 minutes of group education and 20 to 30 minutes of individual counseling with a nutritionist every week. Data were analyzed with SPSS PC program. Results: There was no significant reduction in CRP levels in both brisk walking (Z=-1.70, p=0.088) and brisk walking plus diet group(Z=-0.31, p=0.752). In brisk walking only group, CRP levels were increased after the intervention. Conclusion: Brisk walking could increase the level of CRP when it is in the course of progression and diet could decrease the acute phase inflammatory response.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.323-326
• /
• 2004

에어컨 실외기의 구조 방사 소음을 줄이기 위해 제진재를 적용함에 있어 구조 인텐서티(structural intensity)법을 사용할 수 있다. 에어컨 실외기 각 패널의 법선 방향의 속도는 레이져 스케닝 바이브로미터(laser scanning vibrometer)에 의해 측정되며, 측정된 데이터는 공간 주파수 영역(k-domain)으로 변환하여 구조 인텐서티 계산에 필요한 공간 미분값이 구해진다. 이러한 과정을 통하여 계산된 구조 인텐서티 중 반동 전단 구조인텐서티(reactive shearing structural intensity)값이 가장 높은 부분에 사각형 형상의 제진재를 적용한다. 본 논문은 패널에 비해 그 크기가 작은 제진재의 적용으로 에어컨 실외기의 구조 방사 소음을 줄일 수 있음을 보여준다.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.283-287
• /
• 2014

Square lattice nano-hole arrays with diameters and periodicities of 200 and 500 nm, respectively, are fabricated on InGaN/GaN blue light emitting diodes (LEDs) using electron-beam lithography and inductively coupled plasma reactive ion etching processes. Cathodoluminescence (CL) investigations show that light emission intensity from the LEDs with the nano-hole arrays is enhanced compared to that from the planar sample. The CL intensity enhancement factor decreases when the nano-holes penetrate into the multiple quantum wells (MQWs) due to the plasma-induced damage and the residues. Wet chemical treatment using KOH solution is found to be an effective method for light extraction from the nano-patterned LEDs, especially, when the nano-holes penetrate into the MQWs. About 4-fold CL intensity enhancement factor is achieved by the KOH treatments after the dry etching for the sample with a 250-nm deep nano-hole array.

• 한국축산식품학회지
• /
• 제26권2호
• /
• pp.223-228
• /
• 2006

This study was carried out to investigate the effects of ohmic power intensity on the physico-chemical properties of hamburger patties. Six different ohmic power intensities (0, 10, 20, 30, 40, and 50V) were delivered by controlling the power with the sine wave at 50Hz. The ohmic power intensity influenced the thawing rate, and increasing ohmic power intensity increased the thawing rate. The faster thawing rate was obtained at higher ohmic power intensity (50V) with 0.5% NaCl added meat patties in comparison to no NaCl added hamburger patties. The pH values of all patties were not significantly different with increasing ohmic power intensity (p<0.05). Increasing thawing rate did not tend to improve the water holding capacity (WHC) of all patties by ohmic thawing. Cooking losses were almost the same regardless of increasing ohmic power intensity. Increasing ohmic power intensity tended to increase the thiobarbituric acid reactive substance (TBARS) levels. TBARS levels of all hamburger patties without NaCl were significantly higher than that of 0.5% NaCl added hamburger patties (p<0.05) at higher ohmic intensity (50V). In conclusion, these results indicated that a higher ohmic power intensity at 50 V induced the lipid oxidation of all patties.

• Advances in environmental research
• /
• 제6권1호
• /
• pp.67-81
• /
• 2017

Mining activities play a significant role in environmental pollution by producing large amounts of tailings which comprise heavy metals. The impressive increase in mining activities in recent decades, due to their high influence on the industry of developing countries, duplicates the need for a substantial effort to develop and apply efficient measures of pollution control, mitigation, and abatement. In this study, our objective was to investigate the effect of simulation of the leachate, pH and inflow intensity of transport of $Pb^{2+}$, $Zn^{2+}$, and $Cd^{2+}$ through Lakan lead and zinc plant tailings, in Iran, and to evaluate the modeling efficiency by comparing the modeling results and the results obtained from previous column studies. We used the HP1 model and the PHREEQC database to simulate metals transport through a saturated soil column during a 15 day time period. The simulations assumed local equilibrium. As expected, a lower pH and inflow intensity increased metal transport. The retardation of heavy metals followed the order $Zn^{2+}$ > $Pb^{2+}$ > $Cd^{2+}$ and the removal concentrations of Cd, Pb, and Zn at the inflow intensity critical scenario, and Cd and Pb at inflow acidity critical scenario exceeded the allowable EPA and Iranian's 1053 standard thresholds. However, although the simulation results generally agreed well with the results of the column study, improvements are expected by using multi-dimensional models and a kinetic modeling approach for the reactions involved. The results of such investigations will be highly useful for designing preventative strategies to control reactive transport of hazardous metals and minimize their environmental effects.

• Safety and Health at Work
• /
• 제12권1호
• /
• pp.127-132
• /
• 2021

Background: Herbicides such as glyphosate, paraquat, and 2,4-dichlorophenoxyacetic acid have been reported to cause adverse side effects through production of reactive oxygen species. However, there were no data representing the adverse effects of a mixture herbicide usage in farmers, especially the changes in oxidative marker and antioxidant defense. This study aimed to determine the urinary malondialdehyde (MDA) and glutathione (GSH) level in farmers using mixed herbicides. Methods: Ninety-three farmers were recruited, and two spot urine samples (before and after work) were collected. The urinary MDA level was evaluated by thiobarbituric acid reactive substance assay, and the urinary GSH level was determined using the enzymatic recycling method. Results: Sixty-two percent of the participants were men, and 59% of the participants worked in a farm for 20-40 years. The common combinations of herbicide usage were glyphosate with 2,4-dichlorophenoxyacetic acid (36.5%). There was no significant difference between pre- and post-work urinary MDA and GSH levels among the 3 groups of herbicides. However, the urinary MDA levels in farmers using the combination of glyphosate and paraquat were significantly higher than those found in farmers using glyphosate alone. The associated factors with changes in MDA levels found that the exposure intensity index (B = 0.154), the cumulative exposure intensity index (B = 0.023), and wearing gloves while working (B = -2.347) were found to be significantly associated with MDA level. Conclusion: The results suggest that the combined use of glyphosate and paraquat caused a significant increase in urinary MDA levels. Moreover, intensity of exposure to herbicide and wearing gloves were associated with the level of MDA.

• The Korean Journal of Pain
• /
• 제11권2호
• /
• pp.182-193
• /
• 1998

Background: Ciliary neurotrophic factor (CNTF), identified as a survival factor for developing peripheral neurons is upregulated by reactive astrocytes in the traumatized tissue and in areas of terminal degeneration after a brain lesion. But in the spinal cord, CNTF is expressed in the non-astrocytic phenotypic, maybe oligodendrocytes. The present study was undertaken to determine the upregulation of CNTF expression in reactive astrocytes following spinal cord lesion in the rat. Methods: Unilateral incision of the dorsal funiculus at the thoracic level was performed and rats were sacrificed on days 3, 7, 14 and 28 postlesion. Western blot analysis, immunocytochemical analysis and double immunofluorescence for CNTF and glial fibrillary acidic protein (GFAP) were performed after spinal cord lesion. Results: A major band with 24 kDa and additional band of higher molecular weight form were detectable, and the intensity of the 24 kDa immunoreactive band increased up to 14 days postlesion and decreased toward laminectomized control values. CNTF immunoreactivity was markedly upregulated in the injured dorsal funiculus and adjacent gray matter. The time course of CNTF expression is coincident with the appearance of reactive astrocytes in the injured spinal cord. Moreover, double immunofluorescence for CNTF and glial fibrillary acidic protein (GFAP) revealed that CNTF immunoreactivity was in GFAP immunoreactive astrocytes. Conclusions: These results show that CNTF upregulation occurred in reactive astrocytes following spinal cord lesion, and suggest a role for CNTF in the regulation of astrocytic responses after spinal cord injury.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.420-425
• /
• 2010

We produced a basic system of sterilization of nutrient solution based on the characteristics of coated filter with the visible light-reactive titanium oxide photocatalyst according to the findings of the first stage. We developed a model system with a proper number and arrangement of filter elements, the visible light-reactive titanium oxide photocatalyst according to findings from the basic performance test. Main results of this study were as followers; The ceramic filters showed the best performance of sterilization of nutrient solution. The visible light-reactive titanium oxide photocatalyst sterilized more effectively the nutrient solution under the sunlight than UV light. The sterilization performance by passing repeatedly through a few filter was more efficient than that by treating simultaneously with a large number of filters. The filter with 15ppi in pore size, 20 mm in thickness, and 3 layers in titanium oxide coating was desirable in the intensity and sterilization performance.