• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.335-358
• /
• 2020

We present a numerical model to simulate coupled hydro-mechanical behavior of fault using TOUGH-FLAC simulator. This study aims to develop a numerical method to estimate fluid injection-induced fault reactivation in low permeability rock and to access the relevant hydro-mechanical stability in rock as part of DECOVALEX-2019 Task B. A coupled fluid flow and mechanical interface model to explicitly represent a fault was suggested and validated from the applications to benchmark simulations and the field experiment at Mont Terri underground laboratory in Switzerland. The pressure build-up, hydraulic aperture evolution, displacement, and stress responses matched those obtained at the site, which indicates the capability of the model to appropriately capture the hydro-mechanical processes in rock fault.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.110-110
• /
• 2018

여러 니켈합금 중 인코넬 600은 원전 가압경수로(PWR)의 튜브 재료로 널리 사용되는 재료이다. 스테인리스강과 비교하여 우수한 내식성과 기계적 특성으로 인해 화학설비, 발전설비, 그리고 해양설비 등과 같은 여러 산업분야에서도 널리 사용되고 있다. 그러나 가압경수로용 증기 발생기의 튜브 재료와 같은 특수 환경에서 예민화에 따른 입계부식 및 입계응력부식 등의 문제가 흔히 보고되고 있다. 이러한 내구성 문제는 설비 및 장비의 수명, 내구성 그리고 안정성 등의 치명적인 영향을 미친다. 따라서 용접, 열처리, 그리고 가공과정에서 발생하는 Inconel 600의 예민화 및 입계부식에 관한 연구가 활발히 진행되고 있다. 그러나 100시간 이상 장시간 열화된 시편에 대한 예민화 연구는 전무한 실정이다. 본 연구에서는 장시간 열화된 Inconel 600의 예민화를 평가하기 위해 최대 1,000시간까지 열화를 실시하였으며, 이에 대한 평가방법으로 Double-Loop Electrochemical Potentiokinetic Reactivation(DL-EPR) 시험법을 적용하였다. 본 실험에서 사용된 인코넬 600의 화학성분(wt, %)은 0.01 C, 0.05 Si, 0.14 Mn, 15.3 Cr, 0.5 Cu, 0.015 S, 그리고 나머지는 Ni 이다. 예민화 평가를 위한 등온 열화는 전기열처리로를 이용하여, $550^{\circ}C$와 $650^{\circ}C$에서 최대 1000시간까지 실시하였다. 열화에 따른 미세조직 변화는 scanning electron microscope와 energy dispersive x-ray spectroscopy를 이용하여 실시하였다. DL-EPR 실험은 $25^{\circ}C$의 0.1M $H_2SO_4$ + 0.001M KSCN(potasium thiocyanate) 수용액 하에서 실시하였으며, 분극은 OCP로부터 600 mV(SSE vs.)까지 1.67mV/s 주사속도로 forward scan을 실시 후, 동일한 속도로 OCP까지 reverse scan을 실시하였다. Degree Of Sensitization(DOS)값은 anodic scan peak($I_a$) 값과 reverse scan peak($I_r$) 값의 비로 산출하였다. $$i.e.\;DOS=I_r/I_a{\times}100$$. 그 결과, 온도 변수에 따른 Inconel 600강의 예민화 거동은 서로 상이한 경향을 나타내었다. $550^{\circ}C$의 경우, 열화가 진행됨에 따라 DOS값은 급격하게 증가하는 경향을 나타냈다. 반면, $650^{\circ}C$에서는 일정시간 이후부터 Cr 확산 현상에 의한 탈 예민화 현상이 관찰되었다.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.117-126
• /
• 2003

Due to excellent corrosion resistance and mechanical properties, austenitic stainless steel is widely used as the material for chemical plants. nuclear power plants, and food processing facilities. But, the zone affected by heat in the range of 400 to $800^{\circ}C$ during welding loses corrosion resistance and tensile strength since Cr-carbide precipitation like $Cr_{23}C_6$ forms at the grain boundary and thereby takes place the intergranular corrosion. In this study, AISI 304 stainless steel with the added Nb of 0.3 to 0.7 wt% was solutionized at $1050^{\circ}C$ and sensitized at $650^{\circ}C$. Specimen was welded by MIG. The phase and the microstructure of the specimens were examined by an optical microscope, a scanning electron microscope, and a x-ray diffractometer. The corrosion characteristics of specimens were tested by electrolytic etching and by double loop electrochemical potentiokinetic reactivation method(EPR) in the mixed solution of 0.5M $H_2SO_4$ + 0.01M KSCN. The melting zone had dendritic structure constituted of austenitic phase and $\delta$-ferrite phase. Cr carbide at the matrix did not appear, as Nb content increased. At the grain boundaries of the heat affected zone, the precipitates decreased and the twins appeared. The hardness increased, as Nb content increased. The hardness was highest in the order of the heat affected zone>melted zone>matrix. According to EPR curve, as the Nb content decreased, the reactivation current density(Ir) and the activation current density(la) were highest in the order of the melted zone

• The Korean Journal of Pharmacology
• /
• v.22 no.2
• /
• pp.123-127
• /
• 1986

n-Butyrate (n-BT A) increased the rate and number of infectious units produced in the in vitro reactivation of latent herpes simplex virus. While the mechanism of action of n-BT A is obscure, a continuous presence of n-BT A is necessary for its inductive effect.

• IMMUNE NETWORK
• /
• v.12 no.2
• /
• pp.58-65
• /
• 2012

Background: A cell line with transfected Wilms' tumor protein 1 (WT1) is has been used for the preclinical evaluation of novel treatment strategies of WT1 immunotherapy for leukemia due to the lack of appropriate murine leukemia cell line with endogenous WT1. However, silencing of the transgene occurs. Regarding the effects of hypomethylating agents (HMAs) on reactivation of silenced genes, HMAs are considered to be immune enhancers. Methods: We treated murine WT1- transfected C1498 (mWT1-C1498) with increasing doses of decitabine (DAC) and azacitidine (AZA) to analyze their effects on transgene reactivation. Results: DAC and AZA decreased the number of viable cells in a dose- or time-dependent manner. Quantification of WT1 mRNA level was analyzed by real-time polymerase chain reaction after mWT1-C1498 treated with increasing dose of HMA. DAC treatment for 48 h induced 1.4-, 14.6-, and 15.5-fold increment of WT1 mRNA level, compared to untreated sample, at 0.1, 1, and $10{\mu}M$, respectively. Further increment of WT1 expression in the presence of 1 and $10{\mu}M$ DAC was evident at 72 h. AZA treatment also induced up-regulation of mRNA, but not to the same degree as with DAC treatment. The correlation between the incremental increases in WT1 mRNA by DAC was confirmed by Western blot and concomitant down-regulation of WT1 promoter methylation was revealed. Conclusion: The in vitro data show that HMA can induce reactivation of WT1 transgene and that DAC is more effective, at least in mWT1-C1498 cells, which suggests that the combination of DAC and mWT1-C1498 can be used for the development of the experimental model of HMA-combined WT1 immunotherapy targeting leukemia.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.537-540
• /
• 2001

A parallel TBF system that is consisted of two TBFs was developed f ‘ or the long-term treatment of gas-phase trichloroethylene (TCE). Each TBF was operated for TCE degradation or reactivation in a parallel mode, and the effect of switching time and operation variables between the two reactors was investigated. Within 12 hr after switching from TCE degradation to reactivation mode, the MO activity increased up to the initial level. More than 50 % of TCE was degraded for feed concentrations ranging from 5 to 17 ppmv, and completely 100 % removed at concentration of less than 5 ppmv, while TCE removal decreased severely over 28 ppmv. In various empty bed retention times (EBRTs), ranging 상 om 5.2 to 10.7 min, the optimal EBRT was 10.7 min that TCE conversion achieved more than 50 %. For the inlet loading below 23.4 mg TCE/L/day, TCE was entirely removed. The maximal TCE elimination capacity in this system was about 66.63 mg TCE/L/day. During the continuous treatment of TCE over 3 months, TCE removal efficiency was maintained at the range of about 50 %. In these results, the parallel TBF system can be available for the continuously TCE biodegrading operation.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.4
• /
• pp.245-258
• /
• 2000

Somatic embryogenesis has become a major tool in the study of plant embryology, as it is possible in culture to manipulate cells of many plant species to produce somatic embryos in a process that is remarkably similar to zygotic embryogenesis. Traditionally, the process has been studied by an examination of the ex vitro factors which influence embryo formation. Later structural, physiological and biochemical approaches have been applied. Host recently, molecular tools are being used. Together, these various approaches are giving valuable information on the process. This article gives an overview of somatic embryogenesis by reviewing information on the morphogenesis, physiology, biochemistry and molecular biology of the process. Topics covered include a brief description of the factors involved in the production of embryogenic cells. Carrot cell suspension is most commonly used, and the development of a high frequency and synchronous system is outlined. At the physiological and biochemical lev-els various topics, including the reactivation of the cell cycle, changes in endogenous growth regulators, amino acid, polyamine, DNA, RNA and protein metabolism, and embryogenic factors in conditioned medium are all discussed. Lastly, recent information on genes and molecular markers of the embryogenic process are outlined. Somatic embryogenesis, the best example of totipotency in plant cells, is not only an important tool in studies in basic biology, but is potentially of equal significance in the micropropagation of economically important plants.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.175-182
• /
• 2018

We analyze geological, petrophysical and geomechanical characteristics of a $CO_2$ sequestration test site, Pohang. The target reservoir exists at a depth of 750 m, where porous and permeable sandstones/conglomerates prevail. The reservoir is underlain by thick mudstone formations. We estimate in situ stress conditions using an exploratory wellbore drilled through the target reservoir. The in situ stress condition is characterized by a strike-slip faulting favored stress regime. We discuss various aspects of reservoir fracture pressures and fault reactivation pressures based on the stress magnitudes.

• The Korean Journal of Pain
• /
• v.26 no.3
• /
• pp.242-248
• /
• 2013

Varicella (chickenpox) is a highly contagious airborne disease caused by primary infection with the varicella zoster virus (VZV). Following the resolution of chickenpox, the virus can remain dormant in the dorsal sensory and cranial ganglion for decades. Shingles (herpes zoster [HZ]) is a neurocutaneous disease caused by reactivation of latent VZV and may progress to postherpetic neuralgia (PHN), which is characterized by dermatomal pain persisting for more than 120 days after the onset of HZ rash, or "well-established PHN", which persist for more than 180 days. Vaccination with an attenuated form of VZV activates specific T-cell production, thereby avoiding viral reactivation and development of HZ. It has been demonstrated to reduce the occurrence by approximately 50-70%, the duration of pain of HZ, and the frequency of subsequent PHN in individuals aged ${\geq}50$ years in clinical studies. However, it has not proved efficacious in preventing repeat episodes of HZ and reducing the severity of PHN, nor has its long-term efficacy been demonstrated. The most frequent adverse reactions reported for HZ vaccination were injection site pain and/or swelling and headache. In addition, it should not be administrated to children, pregnant women, and immunocompromised persons or those allergic to neomycin or any component of the vaccine.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2000

Reaction characteristics of 4-methylcatechol 2,3-dioxygenase (4MC230) purified from Pseudomonas putida SU10 with a higher activity toward 4-methylcatechol than catechol or 3-cethylcatechol were studied by altering their physical and chemical properties. The enzyme exhibited a maximum activity at pH 7.5 and approximately 40% at pH 6.0 for 4-methylcatechol hydrolysis. The optimum temperature for the enzyme was around $35^{\circ}C$, since the enzyme was unstable at higher temperature. Acetone(10%) stabilized the 4MC230. The effects of solvent and other chemicals (inactivator or reactivator) for the reactivation of the 4MC230 were also investigated. Silver nitrate and hydrogen peroxid severely deactivated the enzyme and the deactivation by hydrogen peroxide severely deactivated the enzyme and the deactivation by hydrogen peroxide was mainly due to the oxidation of ferrous ion to ferric ion. Some solvents acted as an activator and protector for the enzyme from deactivation by hydrogen peroxide. Ascorbate, cysteine, or ferrous ion reactivated the deactivated enzyme by hydrogen peroxide. The addition of ferrous ion together with a reducing agent fully recovered the enzyme activity and increased its activity abut 2 times.