• Journal of the Korean Ceramic Society
• /
• v.33 no.9
• /
• pp.1045-1049
• /
• 1996

Pressureless-sintered polycrystalline alumina and carbon steel were joined with Ag-33.5Cu-1.5Ti (wt%) brazing alloy. SEM observation revealed that two reaction layers with different thicknesses were continuously formed between the alumina and the brazing alloy. A thick layer formed on the brazing alloy side was identified as Ti3(Cu0.93Al0.07)3O phase with diamond cubic structure. Another thin layer adjacent to the alumina was revealed as $\delta$-TiO phase of which the crystal structure was HCP with a lattice parameter of a0=0.419 nm and c0=0.284 nm. It was confirmed using XPS analysis that $\delta$-TiO was formed directly by a redox reaction of alumina with titanium ir, molten brazing alloy.

• Journal of Photoscience
• /
• v.6 no.2
• /
• pp.57-60
• /
• 1999

The reaction of [1.1.1]propellane with singlet methylene afforded 1,3-dimethylenecyclobutane and [l.1.1.1]paddlane (3). Various minor products were also produced. The reaction of [1.1.1]propellane with triplet methylene afforded 1,3-dimethylenecyclobutane (2) and various minor products. But even trace of [1.1.1.1]paddlane was not detected. The mechanism for the addition of singlet methylene involved [1.1.1.1]paddlane intermediate The addition of triplet methylene led to diradical intermediate. In order to reveal the reaction pathway for generation of various ruiner products, various studies were carried out under the same condition.

• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.259-262
• /
• 1989

The reaction of the sodium salts of 4-methoxy and 4, 7-dimethoxy 6-hydroxy benzofuran-5-carboxylic acid with ethyl chloroformate yields the corresponding dicarbethoxy derivatives. The N-substituted amides were obtained by treating the latter compounds with amines. The corresponding hydrazides were synthesized by the reaction of hydrazine hydrate on the dicarbethoxy derivatives which spontaneously cyclized to 5-substituted-2, 3- dihydro-1, 3, 4, -oxadiazol-2-one. Also the reaction with phenyl hydrazine has been studied. The dicarbethoxy derivatives and N-substituted amides were tested against Gram positive and Gram negative bacteria in vitro. Most of the compounds posses moderate or slight activity against Gram positive bacteria.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.466-470
• /
• 1990

Aflatoxin $B_1$ ($AFB_1$) was reacted with ascorbic acid (AA) alone, with AA plue cysteine and with AA plus cupric ion for 5 days (at $37^{\circ}C$ and pH 5), and the mutagenicity of the reaction products was tested with Salmonella typhimurium TA 100. About 10% of AFBl induced mutagenesis was reduced when $AFB_1$ reacted with AA. This decreasing effect was more severe when $AFB_1$ reacted with AA plus cysteine. The mutagenicity of $AFB_1$ when reacted with AA plus cupric ion was almost completely inhibited, however, eupric ion itself was shown to enhance the mutagenicity of $AFB_1$. Therefore, $AFB_1$ may be degraded in the presence of AA under the given reaction condition and the reaction products was observed to have nonmutagenic effects on the bacterial mutagenecity trials.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.810-819
• /
• 2007

Investigation of alkali activation of fly ash and blast furnace slag was carried out using waterglass and sodium hydroxide. XRD, FTIR, $^{29}Si$ and $^{27}Al$ NMR, TGA and SEM were used to observed the reaction products and microstructure of the fly ash/slag cement (FSC) pastes. The reaction products were amorphous or low-ordered calcium silicate hydrate and aluminosilicate gel produced from alkali activation of blast furnace slag and fly ash, respectively. On the basis of this investigation, waterglass solution with a modulus(Ms) of 1.0 and 1.2 is recommended for alkali activation of fly ash and blast furnace slag. Morphology of FSC pastes alkali-activated with Ms of 1.0 and 1.2 shows a more solid and continuous matrix due to restructuring of gel-like reaction products from alkali-activated fly ash and blast furnace slag together with another hydrolysis product(i.e., silica gel) from water glass.

• Preventive Nutrition and Food Science
• /
• v.2 no.3
• /
• pp.232-235
• /
• 1997

This study was investigated to determine antimutagenic effects of enzymatic browning reaction products (PEBRPs) obtained by reaction of polyphenol compouns with oxidase extracted from potato. Catechol (Ca) PEBRPs showed the strongeest inhibitor effects with 90% inhibition on benzo-($\alpha$)-pyrene(B($\alpha$)P) induced mutagenesis in Salmonella typhimurium TA98, but he least with40% inhibition on the 2-aminofluorene (2-AF) induced mutagenesis in TA98. The strong antimutagenic activities with 80% inhibition were observed in the presence of 100$\mu\textrm{g}$/plate of hydroquinone(HQ)-PEBRP on the B($\alpha$)P or 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole(Trp-P-1) induced mutagenesis in TA98, whereas HQ-PEBRP showed the least antimutagenic effect on 2-AF-induced mutagenesis. The addition of 100$\mu\textrm{g}$ hydroxyhydroquinone(HHQ)-PEBRP to the plate led to approximately 82% inhibitory effects on 2-AF or Trp-P-1 induced mutagenesis in TA98, whereas the least antimutagenicity was obsrved in the4-nitroquinoline-1-oxide(4-NQO) induced mutagenesis in the presence of 100$\mu\textrm{g}$/plate of HHQ-PEBRP. More than 80% inhibiton were observed in the presence of 200$\mu\textrm{g}$/plate of Pyrogalol(Py)-PEBRP on the B($\alpha$)P or Trp-P-1 induced mutagenesis in TA98, but the least with 38% inhibition on 4-NQO induced mutagenesis in TA98. The results indicate that enzymatic browing reaction products of potato have a strong modulatory effect on mutagen induced mutagenesis in TA98.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.108-117
• /
• 1994

This study was performed to investigate the Alkali-Silica Reaction(ASR) of crushed stones using chemical analysis, polarization microscope, XRD, chemical method(KS F 2545, ASTM C 289), mortar-bar method( KS F 2546, ASTM C 227) and Scanning Electron Microscope (SEM ) and Energy Dispersive X-ray Analysis(EDXA) of reaction products by ASK in the mortar bars and to investigate the influence on alkali content and kind of added alkali to the ASR. Test results show that one kind of domestic crushed stone is estimated as deleterious by ASTM chemical method and mortar bar method, and reaction product is proved as alkali silicate gel by EDXA.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.264-268
• /
• 1998

Many enzymes catalyze a primary reaction and/or secondary reaction. Dextransucrase usually synthesizes dextran from sucrose as a primary reaction. The secondary reaction of dextransucrase is the transfer of glucose from sucrose to carbohydrate accepters. We have reacted dextransucrase from Leuconostoc mesenteroides B-742CB with sucrose and pullulan as an acceptor under different reaction conditions; various concentrations of pullulan, enzyme, sucrose and different pHs and temperatures of reaction digests. The yield of modified pullulan was 57%(<${\pm}$5%) of theoretical under the reaction condition of pH 5.2, temperature 28$^{\circ}C$, 0.37% of pullulan, and 0.l U/$m\ell$ of dextransucrase. Modified products were more resistant against the hydrolysis of pullulanase and endo-dextranase than those of native pullulan. The positions of glucose substitution in the modified products were determined by methylation followed by acid hydrolysis and analyzed by TLC. The products were modified by the addition of glucose to the position of C3, C4, C6 free hydroxyl group of glucose residues in the pullulan.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2008

In this study, thermochemical degradation of hemicellulose by Acetone-Solvolysis, the effects of reaction temperature, conversion yield, degradation properties and degradation products were investigated. Experiments were performed in a tube reactor by varying reaction temperature from $200{\circ}C$ to $400{\circ}C$ at 40 min of reaction time. The liquid products from pyrolysis-liquefaction of hemicellulose contained various kinds of ketones. ketones, as 4-methyl-3-penten-2-one, 3-methylene-2-pentanone, 22,6-dimethyl-2, 5-heptadien-4-one, 4-methyl-2-pentanone, 5-methyl-2-hexanone, 3,5,5-trimethyl-2-cyclohexen-1-one, and bezenes. as 1,4-dimethylbenzene, 1-methyl-2-(1-methylethyl)-benzene, 1,4-dimethyl-2-(2-methylpropyl)benzene, 4-secbutyl-ethyl benzene, could be used as high-octane-value fuels and fuel additives. Combustion heating value of liquid products from thermochemical conversion processes of hemicellulose was in the range of $6,680{\sim}7,170cal/g$. After 40min of reaction at $400{\circ}C$ in Acetone-Solvolysis of hemicellulose, the energy yield and mass yield was as high as 72.2% and 41.2g oil/100g raw material, respectively.