• 한국안전학회지
• /
• 제3권1호
• /
• pp.37-45
• /
• 1988

This research investigated the condition for plant design on reclamation of waste plastic by heat decomposition. The results were summarized as follows 1. The highest of oil product by heat decomposition is about 54.7％. 2. The optimum reaction temperature is about 300­40$0^{\circ}C$. 3. The optimum reaction time is 2­3 hours. 4. When the flow rate of 8­16 cm/sec in column reactor the yield is maximum. 5. Waste plastics yielded of carbon black product by heat decomposition at the optimum condition is about 23.5%. 6. Calorific values 0：1 were 9820 Kcal/kg.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.798-802
• /
• 1996

The photochemical decomposition of aqueous ammonia in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The decomposition of ammonia depended on the concentration of oxygen in the solution. With increasing the concentration of oxygen, the decomposition of ammonia diminishes. Hydrazine is found the major product from the irradiation. In the presence of oxygen, hydrogenperoxide was also produced. The product yields depended also on the concentration of oxygen in the solution. The initial quantum yield of the products and of the ammonia decomposed were determined. Probable reaction mechanisms for the reaction were presented from the products analysis.

• 한국가축번식학회지
• /
• 제24권4호
• /
• pp.339-341
• /
• 2000

In mammals, fatty acid utilization is initiated by activation of fatty acid, catalyzed by acyl-CoA synthetase(ACS, EC6.2.1.3). This enzyme reaction is essential in fatty acid metabolism, since mammalian fatty acid synthetase contains a specific thioesterase to produce fatty acid as th $\varepsilon$ final reaction product. Acyl-CoA, the product of ACS, is utilized in various metabolic pathways including membrane biogenesis, energy production and fat deposition. (omitted)

• 멤브레인
• /
• 제13권4호
• /
• pp.268-282
• /
• 2003

불완전 분리의 실질적인 분리투과 특성을 근거로 하는 모사모델을 이용하여 투과증발 막촉진 에스터화 반응의 실질적인 거동을 연구하였다. 막의 분리효율, 막의 물제거 능력을 모델에 포함시킴으로써 반응모사를 통하여 이들이 막촉진반응에 어떻게 영향을 끼치는지를 체계적으로 관찰할 수 있었다. 막을 통한 비완전분리가 일어날 경우에 초기 반응물 몰비율이 1이 아닐 때 반응 혼합물중 소량으로 존재하는 반응성분이 투과되거나, 혹은 초기 반응물 몰비율이 1인 반응 혼합물중 어느 반응성분이 투과되든지 반응이 완결될 수 없었다. 생성물인 에스터가 물과 함께 일부 투과될 경우 정방향 반응속도를 증가시켜 시간에 따른 반응 전환률을 증가시킨다. 막을 통한 불완전 분리시 막을 통한 투과로 인하여 발생하는 반응혼합물의 부피감소로 인하여 반응성분 뿐 아니라 생성성분의 농도가 증가되는데 이들 농도증가가 반응속도에 상반된 영향을 끼친다; 반응물 농축은 반응속도를 증가시키나 생성물 농축은 역방향의 반응을 촉진시킴으로서 반응속도를 감소시킨다. 반응초기에는 반응물 농축효과가 우세하나 반응이 진행됨에 따라 생성물 농축효과가 우세하여 반응속도를 저하시킴이 모사결과 관찰되었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.109-115
• /
• 2000

In the present study, (10%$Al_2O_3$+5%Si)/AZ91 Mg hybrid composite was fabricated using the squeeze casting method. During squeeze casting, molten Mg was infiltrated into the preform of 10%$Al_2O_3$+5%Si and reaction product of $Mg_2Si$ intermetallic compound was formed by the reaction between molten Mg and Si powder. Microstructure has been observed and mechanical properties were evaluated for the reaction squeeze cast (RSC) hybrid composite. It was found that Si powder totally reacted with molten Mg to form $Mg_2Si$. Reinforcement ($Al_2O_3$) and the reaction product ($Mg_2Si$) are fairly uniformly distributed in Mg matrix for the squeeze cast hybrid composite. Mechanical properties were improved with hybridization of reinforcements, namely higher hardness and enhanced wear resistance comparing squeeze cast (15%$Al_2O_3$)/AZ91 Mg composite.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4210-4214
• /
• 2011

Quasiclassical trajectory (QCT) calculations of Ne + ${H_2}^+$ reaction have been carried out on the adiabatic potential energy surface of the ground state $1^2$ A'. The reaction probability of the title reaction for J = 0 has been calculated, and the QCT result is consistent with the previous quantum mechanical wave packet result. Quasiclassical trajectory calculations of the four polarization-dependent differential cross sections have been carried out in the center of mass (CM) frame. The P(${\theta}_r$), P(${\phi}_r$) and P(${\theta}_r$, ${\phi}_r$) distributions, the k-k'-j' correlation and the angular distribution of product rotational vectors are presented in the form of polar plots. Due to the well in $1^2$ A' PES, the reagent vibrational excitation has greater influence on the polarization of the product rotational angular momentum vectors j' than the collision energy.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.80-84
• /
• 1991

Lignocellulosic biomass including acetosolv ricestraw and spruce lignin were liquefied and converted into liquid hydrocarbons by catalytic hydroliquefaction reaction. These experimental works were carried out in 1-liter-capacity autoclave using 50% tetralin and m-cresol solution respectively as soluble solvent and Ni. Pd. Fe and red mud as catalyst. $H_2$ gas was supplied into the reactor for escaltion of deoxhydroenolysis reaction. Catalyst concentrations were 1 % of raw material based on weight. The ratio between raw materials and soluble solvent are 1g and 10cc. The reaction conditions are 400-$700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure. The highest yield of hydrocarbon, so called "product oil" showed 32% and 5.5% of lowest char formation when red mud was used as catalyst. The product oil yields from those of other catalysts were in the range of 20-29%. The influence of different initial hydrogen pressures was examined in the range d 30-50 atms. A minimum pressure of 35 atms was necessary to obtain a complete recovery of souble solvent for recycling.

• 청정기술
• /
• 제28권1호
• /
• pp.32-37
• /
• 2022

Food waste is produced from food factories, food services, and home kitchens. The generated mass reached 5.4 million tons/year in 2020. The basic management technology for such waste has been biological degradation under an anaerobic environment. However, the whole process is intrinsically slow and considerably affected by the inner physicochemical properties of the waste and other surrounding conditions, which makes optimization of the process difficult. The most promising options to counter this massive generation of waste are eco-friendly treatments or recycling. As a preliminary step for these options, attempts were made to evaluate the feasibility and usability of three simulative models based on reaction kinetics. Model (A) predicted relative changes over reaction time for reactant, intermediate, and product. Overall, an increased reaction rate produced less intermediate and more product, thereby leading to a shorter total reaction time. Particle diminishing model (B) predicted reduction of the total waste mass. The smaller particles diminished faster along with the dominant effect of microbial reaction. In Model (C), long-chain cellulose was predicted to transform into reducing sugar. At a standard condition, 48% of cellulose molecules having 10⁵ repeating units turned into reducing sugar after 100 h. Also it was found that the optimal enzyme concentration where the highest amount of remnant sugar was harvested was 1 mg L^-1.

• Journal of Microbiology
• /
• 제39권4호
• /
• pp.331-333
• /
• 2001

The production of oilgosaccharides using Penicillium citrium cells at high sugar concentrations was investigated at 50$\^{C}$ and pH 5.0. Both 1-kestose and neokestose were produced form sucrose, while both nystose and tetrasaccharide were produced from 1-kestose. However, no reaction product was obatined from neogructo-oligosaccharides such as neokestos. Based on these experimental rsults, a hypothetical reaction route was proposed to illustrate how neofructor-oilgosaccharids are formed from 1-kestose.

• Bulletin of the Korean Chemical Society
• /
• 제16권4호
• /
• pp.310-315
• /
• 1995

The heterobimetallic anion, (OC)5CrMn(CO)5-M+ (M+=Na+, PPN+), which has a donor-acceptor metal-metal bond1, was reacted with allyl bromide to yield BrCr(CO)5- and Mn(CO)5(CH2CHCH2). The reaction mechanism has been proposed in terms of the consecutive reaction pathway in which Cr(CO)5(THF) is an important intermediate leading to the corresponding product. Counterion effect on this reaction was also evaluated and the results were compared with those of the corresponding reaction of the mononuclear carbonyl anion, Mn(CO)5-.