• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권2호
• /
• pp.131-138
• /
• 1999

The purpose of this study is to evaluate the effects of resorbable plate in the healing process of mandibular fracture. Reduction and rigid fixation was carried out on the artificial mandibular fracture site of the rabbits, using a resorbable screw, 1.5mm in diameter and 4.0mm in length, and an absorbable plate 1.5mm in thickness(Lactosorb$^{(R)}$). En block tissue specimens with plate were taken from the rabbits at 4, 6, 8, and 10 weeks intervals and specimen were observed with light microscope under the hematoxylin-eosin staining, to observe the inflammatory reaction and tissue healing process. The following conclusions were drawn: 1. The subject displayed good healing with no signs of detachment of the fixation plate. 2. At 4 weeks, the plate was covered by the connective tissue. Then at 6 weeks, bone regeneration was discovered around the plate. 3. During the period of healing, no inflammatory reaction or foreign body reaction, as a result of using resorbable plate, were observed. 4. At 8 weeks, the initial phase of the absorption of the plate was observed. Then at 10 weeks, macrophage were observed around the plate, indicating the absorption phase was in process. From the above results, it can be determined that when the resorbable plate is applied to rabbit, full recuperation occurs naturally in the absence of inflammatory reaction and foreign body reaction. The selected study is clinically valuable in proving this procedure.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2194-2198
• /
• 2008

In this paper, the construction of secondary reaction plate is analyzed by 3-D Finite Element Method(3-D FEM) to consider the influence of its variation on the transverse edge effect of LIM. The effective 3-D analysis model for considering the transverse edge effect caused by the finite widths of the primary and the secondary is proposed. The simple method measuring the transverse edge effect by using the patterns of currents induced in the secondary reaction plate is also proposed. With this effective analysis method, various models of secondary reaction plate with overhang and cap has been analyzed to consider the relationship between the construction of secondary reaction plate and the transverse edge effect of LIM.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.65-72
• /
• 2016

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs. This paper deals analyzed the characteristics of linear induction motor used for moving the vehicle of container scanner. Thrust, efficiency and load characteristic were interpreted with FEM regarding two models whose material of secondary reaction plate was copper and aluminum. It suggested the interpretation of thrust, efficiency and power factor characteristic along slip and compared the operation ability of linear induction motor through characteristics analysis along the load.

• Structural Engineering and Mechanics
• /
• 제45권2호
• /
• pp.169-182
• /
• 2013

The mechanical behavior of rectangular foundation plates with perimetric beams and internal stiffening beams of the plate is herein analyzed, taking the foundation design into account. A series of dimensionless parameters related to the geometry of the studied elements were defined. In order to generalize the problem statement, an initial settlements was considered. A numeric procedure was developed for the resolution by means of the Finite Differences Method that takes into account the stiffness of the plate, the perimetric and internal plate beams and the soil reaction module. Iterative algorithms were employed which, for each of the analyzed cases, made it possible to find displacements and reaction percentages taken by the plate and those that discharge directly into the perimetric beams, practically without affecting the plate. To enhance its mechanical behavior the internal stiffening beams were prestressed and the results obtained with and without prestressing were compared. This analysis was made considering the load conditions and the soil reaction module constant.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제21권4호
• /
• pp.245-275
• /
• 2017

The present investigation deals, Dufour and heat source effects on radiative MHD slip flow of a viscous fluid in a parallel porous plate channel in presence of chemical reaction. The non-linear coupled partial differential equations are solved by using two term perturbation technique subject to physically appropriate boundary conditions. The numerical values of the fluid velocity, temperature and concentration are displayed graphically whereas those of shear stress, rate of heat transfer and rate of mass transfer at the plate are presented in tabular form for various values of pertinent flow parameters. By increasing the slip parameter at the cold wall the velocity increases whereas the effect is totally reversed in the case of shear stress at the cold wall. It is observed that the effect of Dufour and heat source parameters decreases the velocity and temperature profiles.

• 공업화학
• /
• 제25권2호
• /
• pp.198-203
• /
• 2014

본 연구에서는 Ni metal foam 플레이트의 수증기 개질반응 및 표면 특성을 조사하였다. 전처리를 통하여 Ni의 산화상태를 변화시킬 수 있었으며, 활성 site로서 표면에 노출된 metallic Ni 종은 수증기 개질 반응활성에 중요한 역할을 한다. 또한 Ni metal foam 플레이트의 기공제어 및 촉매 기능을 부여하기 위하여 Ni metal foam 플레이트와 Ni-YSZ 촉매를 혼합하여 다공성 촉매 분리막을 제조하였다. SEM 분석 결과 metal foam 플레이트의 기공을 제어할 수 있었으며, 표면에 Ni-YSZ 촉매는 고르게 잘 분포되어 있었다. Ni 기반 다공성 촉매 분리막은 공간속도에 상관없이 상용촉매와 유사한 수증기 개질 활성을 가진다.

• 한국운동역학회지
• /
• 제12권1호
• /
• pp.193-204
• /
• 2002

The purpose of this study was to investigate the effect of martial art type and target height on the ground reaction force factors during Dollyuchagi motion. Data were collected using force plate. Five Taekwondo players and five Hapkido players were tested during Dollyuchagi motion to three different target heights(0.8, 1.2, 1.6 m). After analysis of kinetics using force plate data, maximum vertical ground reaction force was 1.62~2.44 BW, and impulse was $0.66\sim1.01 BW{\cdot}s$. Even though there was no difference for maximum ground reaction forces and impulse between Hapkido and Taekwondo, as target height was higher, impulse increased. Anterior-posterior and vertical ground reaction forces at kicking foot take-off were greater with target height, although there was no difference for medio-lateral force with target height. At impact there was significant difference for anterior-posterior ground reaction force between Hapkido and Taekwondo players. Taekwondo players' force (range, -0.23~-0.26 BW) was greater than Hapkido players's force (range, -0.08~-0.14 BW).

• 대한의용생체공학회:의공학회지
• /
• 제21권3호
• /
• pp.285-293
• /
• 2000

나이에 의한 외부의 환경조건의 변화는 이에 적응하려는 척추의 구조적인 변화를 가져온다. 이러한 구조적인 변화는 척추의 biomechanical 거동에 영향을 미칠 것이다. 이러한 구조적인 변화의 효과를 연구하기 위하여, 나이에 의한 척추의 재료 및 기계적인 물성의 변화는 제외되었다. 유한요소법 (finite element method)에 의한 lumbar spine model (L3-L4)에 있어서, Annulus 의 유한요소 모델은 laminate composite elements로서 16개의 layer와 6개의 물성으로 구성되어있다. Spinal stiffness 와 facet reaction은 나이가 들수록 증가했다. 나이가 들수록 inner annulus의 fiber/layer tensile strains, cancellous bone stress 및 end-Plate stress는 감소했다. Fiber/layer compressive strains, facet reaction, ligament reaction and end-plate rigidity는 나이에 의한 척추의 구조적인 변화에 의하여 증가했다. 따라서 나이에 의한 척추의 정상적인 쇠퇴과정에 있어서 척추의 구조적인 변화는 spinal stiffness를 증가 시켜서 척추 및 disc의 지나친 변형을 감소시킬 것이다.

• 한국지반공학회논문집
• /
• 제24권6호
• /
• pp.57-67
• /
• 2008

철도노반의 다짐 후 품질을 관리하기 위하여 비반복 평판재하시험(nonrepetitive plate loading test)으로부터 얻어지는 지반반력계수(subgrade reaction modulus, $k_{30}$)와 반복평판재하시험(repetitive plate loading test)으로부터 획득하는 변형률계수(strain modulus, $E_v$)의 두 계수를 혼용하고 있다. 평판을 이용한 재하시험을 수행한다는 점에서 두 시험법은 동일하나, 설계정수 획득방법, 반복재하 횟수, 각 하중 단계에서의 시험 종료방법 등 시험방법에는 큰 차이가 있다. 본 논문에서는 두 시험의 차이를 비교 분석하고 두 계수에 대한 상관성을 평가하였다. 이를 위하여 경부고속철도 2단계 공사구간의 원지반 6개소와 쌓기지반 5개소에 대한 총 22회의 현장시험을 실시하였다. 현장 시험 시의 응력조건, 변형률 조건 및 포아송비 조건을 고려한 보정을 수행하여 두 계수의 상관성을 높였으며, 현장에서 사용이 가능하도록 지반종류에 따른 상관계수를 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.251-251
• /
• 2010

Linear induction motor performance for a light-weight urban transit has been established and verified. In this paper, linear induction motor is analyzed by finite-element method to consider influence of construction of secondary reaction plate on the transverse edge effect. With this effective analysis method, various models with overhang and cap have been analyzed to consider the relationship between the construction of secondary reaction plate and the transverse edge effect.