• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.942-948
• /
• 2010

In this study we aims to examine the effects of 0.5 mol% $Cr_2O_3$ addition on the reaction, microstructure development, resultant electrical properties, and especially the bulk trap and interface state levels of ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5, 1.0, and 2.0) systems (ZBS). The samples were prepared by conventional ceramic process, and characterized by XRD, density, SEM, I-V, impedance and modulus spectroscopy (IS & MS) measurement. The sintering and electrical properties of Cr-doped ZBS (ZBSCr) systems were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed more than $100^{\circ}C$ lowered on heating in ZBS (Sb/Bi=1.0) by Cr doping. The densification of ZBSCr (Sb/Bi=0.5) system was retarded to $800^{\circ}C$ by unknown Bi-rich phase produced at $700^{\circ}C$. Pyrochlore on cooling was reproduced in all systems. And $Zn_7Sb_2O_{12}$ spinel ($\alpha$-polymorph) and $\delta-Bi_2O_3$ phase were formed by Cr doping. In ZBSCr, the varistor characteristics were not improved drastically (non-linear coefficient $\alpha$ = 7~12) and independent on microstructure according to Sb/Bi ratio. Doping of $Cr_2O_3$ to ZBS seemed to form $Zn_i^{..}$(0.16 eV) and $V^{\bullet}_o$ (0.33 eV) as dominant defects. From IS & MS, especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one (1.1 eV) and electrically inactive intergranular one (0.95 eV) with temperature.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.46-57
• /
• 2006

For the development of combustion technology of RDF(refuse derived fuel), combustion characteristics are examined in bubbling fluidized bed, circulating fluidized bed, continuos combustor and batch type combustor. The characteristics of combustion and exhaust gas has been compared and analyzed in many type of combustion facilities, which has been utilized as basic data for the advanced research of specified RDF combustion facility. Stable combustion has been observed in bubbling and circulating fluidized bed from controled operating condition like the proper feeding rate and superficial gas velocity. In circulating fluidized bed, concentration of NOx has been increased with the operating condition by the fuel-NO and oxygen reaction and $SO_2$ can be considered not to be produced in RDF fluidized bed from very low concentration in flue gas. HCl concentration is 36.4 ppm as average value and lower than standard emission value, but the counter plan is needed. Shaped RDF and fluff RDF have been compared in continuos combustor and batch type combustor and shaped RDF shows benefit for the stable heat recovery and gas emission shows similar value and characteristics.

• The Korean Journal of Pharmacology
• /
• v.18 no.1
• /
• pp.65-72
• /
• 1982

It has been known that retinoids are intrinsically of critical importance for control of premalignant epithelial cell differentiation. In the absence of retinoids, normal cellular differentiation and growth does not occur in epithelia such as those of trachea and bronchi. Furthermore, it was also reported that retinoid deficiency enhanced susceptibility to chemical carcinogenesis in the respiratory system, in the bladder, and in the colon of the experimental animal. In 1974, Bollag examined the effects of synthetic retinoids in prevention of development of cancer and demonstrated synthetic retinoids to have more favorable therapeutic index than retinoic acid for causing regression of skin papilloma in mice. Therefore, it was assumed that this anticarcinogenic effect of vitamin A derivatives could be due to modification of the metabolism of the carcinogenic polycyclic hydrocarbon, which must first be activated to exert their effect. Hill and Shih reported that vitamin A compounds and analogs had inhibitory effect on drug metabolizing enzyme from liver and lung tissue of mouse and hamster. Lucy suggested that the chemoprevention effect of vitamin A derivatives is due to reaction with molecular oxygen, and it is possible that inhibition of hydroxybenzpyrene formation is a result of this property. On the other hand, butylated hydroxytoluene which is a potent antioxidant strongly inhibited the formation of mammary tumor induced by dimethylbenranthracene. Also, it was observed that this antioxidant inhibited cancer induction in rats by N-2-fluo-renylacetamide. The purpose of this experiment was to investigate the effect of vitamin A derivatives such as retinoic acid and retinoid on drug-metabolizing enzyme and to determine whether riboflavin tetrabutylate or vitamin E could prevent of modify any changes induced by vitamin A delivatives in the rats. The results obtained were as followings. 1) Body weight was significantly reduced by retinoic acid, but not by retinoid. 2) Retinoic acid markedly increased liver weight while retincid showed no effect on liver weight. Treatment of riboflavin tetrabutylate did not affect retinoic acid-induced change in both body weight and liver weight. 3) Both retinoic acid and retinoid remarkably decreased the activity of aminopyrine demethylase. Pretreatment of riboflavin tetrabutylate, however, prevented inhibitory effect of retinoic acid on the enzyme activity. 4) No significant effect of vitamin E on aminopyrine demethylase was observed in both groups treated with retinoic acid and retinoid.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.220-225
• /
• 1998

The spinel structured $LiMn_2O_4$ was prepared from $Li_2CO_3$ and $MnO_2$ by calcination at various temperatures in the range of $750{\sim}900^{\circ}C$. It was found that the most suitable cubic structure of $LiMn_2O_4$ was obtained by heating at $850^{\circ}C$ for 12 hrs. However, in the calcination at $900^{\circ}C$, $Mn^{4+}$ of 0.06M was changed to $Mn^{+3}$ by the oxygen loss, so that it has been shown that the formula has changed to $LiMn_2O_{3.97}$. This phenomena were in agreement with the Jahn-Teller distortion by the increment of $Mn^{+3}$ ion on the octahedral sites of the spinel structured $LiMn_2O_4$. The results showed that after 15 charge/discharge cycles in the voltage range from 3.5V to 4.3V versus Li/$Li^+$ with a current density of $0.25mA/cm^2$, the spinel structured $LiMn_2O_4$ that was prepared at $900^{\circ}C$ showed a lower discharge capacity, 82~50 mAh/g, while the $LiMn_2O_4$, prepared at $850^{\circ}C$, showed the discharge capacity of 102~64 mAh/g.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.621-627
• /
• 2008

In this study, a technique of speciation and determination of the trace inorganic arsenic(As(III) and As(V)) in water sample using HPLC-DRC-ICP-MS has been developed. Isocratic mobile phase of 10 mM ammonium nitrate and 10 mM ammonium phosphate monobasic was used and methanol(5 v/v%) was used as flushing solvent. Selection of the best flow rate of reaction gas, O$_2$, and optimization of the parameters such as pH and flow rate of mobile phase, and injection volume of sample for the separation and detection of arsenic species were carried out. The oxygen flow rate of 0.5 mL/min, pH of 9.4 and flow rate of 1.5 mL/min of mobile phase, and injection volume of sample of 100 $\mu$L were found to be the best parameters for the speciation and determination of arsenic species. The analytical features of the method were detection limit 0.10 and 0.08 $\mu$g/L, precision(RSD) 4.3% and 3.6%, and recovery 95.2% and 96.4% for As(III) and As(V), respectively. Analysis time was 4 minutes per sample. Linear calibration graphs with r$^2$ = 0.998 were obtained for both As(III) and As(V). Speciation analysis of arsenic species in the raw water samples collected from the tributary streams to Han River and main stream of Paldnag were performed by the proposed method. The concentrations of As(III) ranged from 0.10 to 0.22 $\mu$g/L and As(V) concentrations ranged from 0.44 to 1.19 $\mu$g/L, and 93.5% of total arsenic was found to be As(V).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.5
• /
• pp.417-425
• /
• 2009

The potential utility of fish scales to the functional food industry has been investigated due to its antioxidant and antihypertensive characteristics. In this study, we report on the reactive oxygen species (ROS) scavenging and angiotensin I converting enzyme (ACE) inhibitory activities of gelatin hydrolysates processed from Branchiostegus japonicus scales, which are also high in protein content (about 46.1%). We prepared the enzymatic gelatin hydrolysates with four proteases (${\alpha}$-chymotrypsin, Alcalase, Neutrase and trypsin) from B. japonicus scale gelatin, which was prepared according to different reaction times, substrate/enzyme ratios and substrate concentrations. The enzymatic hydrolytic degrees of the gelatin increased time-dependently up to 6 hrs, while the Alcalase gelatin hydrolysates showed the highest hydrolysis degrees compared to the others. Furthermore, gelatin hydrolysates of Neutrase and ${\alpha}$-chymotrypsin showed the highest DPPH radical and $H_2O_2$ scavenging activities ($IC_{50}$ value; 9.18 mg/mL and 9.74 mg/mL), respectively. However, the activities were not significant (P<0.05). We also observed that the four gelatin hydrolysates significantly increased ACE inhibitory activities from approximately 20% to 60% (P<0.05), Among them, the Alcalase gelatin hydrolysates showed the higher ACE inhibitory activity ($IC_{50}$ value; 0.73 mg/mL) compared to the others. These results suggest that the enzymatic gelatin hydrolysates prepared from B. japonicus scales may possess a potentially useful function as an ACE inhibitory agent. As such, the utility of B. japonicus scales should be given due consideration for application in the functional food industry.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.47-52
• /
• 2015

A microbial fuel cell (MFC) is a device that can be obtained electricity from a variety of organic through the catalytic reaction of the microorganism. The MFC can be applied to various fields, and research is required to promote the performance of the microbial fuel cell for commercialization. The lower performance of an MFC is due to oxygen reduction at the cathode and the longer time of microbial degradation at anode. The MFC amount of power is sufficient but, in consideration of many factors, as a renewable energy, now commonly power density as compared to Nafion117 it is an ion exchange membrane used is PP (Poly Propylene) from 80 to about 11 fold higher, while reducing the cost to process wastewater is changed to a microporous non-woven fabric of a low cost, it may be energy-friendly environment to generate electricity. All waste, in that it can act as a bait for microorganisms, sustainability of the microbial fuel cell is limitless. The latest research on the optimization and performance of the operating parameters are surveyed and through the SSaM-GG(Smart, Shared, and Mutual- Green Growth) or GG-SSaM(Green Growth - Smart, Shared, and Mutual) as the concept of sustainable development in MFC, the middle indices are developed in this study.

• Journal of Pharmacopuncture
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2012

Objectives: The purpose of this study is to examine whether Hominis Placental pharmacopuncture solution (HPPS) combined with zinc-oxide nanoparticles (ZnO NP) activates RAW 264.7 cells. Methods: We soaked ZnO nanoparticles in the Hominis Placenta pharmacopuncture solution, thereby making a combined form (ZnO NP HPPS). The effect of ZnO NP HPPS on the intracellular reactive oxygen species (ROS) production was measured by 2', 7'-dichlorofluorescin diacetate (DCFH-DA) assay. The effect of ZnO NP HPPS on NF-${\kappa}B$ was measured by using a luciferase assay. The effect of ZnO NP HPPS on the cytokine expression was assessed by semi-quantitative reverse transcriptase polymerase chain reaction (RT-PCR). The cellular uptake of ZnO NP HPPS was measured by using a flow cytometric analysis, and cellular structural alterations were analyzed by using transmission electron microscopy (TEM). Results: Neither the HPPS nor the ZnO NPs induced intracellular ROS production in RAW 264.7 cells. Neither of the materials activated NF-${\kappa}B$ or it's dependent genes, such as TNF-${\alpha}$, IL-1, and MCP-1. However, ZnO NP HPPS, the combined form of ZnO NPs and HPPS, did induce the intracellular ROS production, as well as prominently activating NF-${\kappa}B$ and it's dependent genes. Also, compared to ZnO NPs, it effectively increa-sed the uptake by RAW 264.7 cells. In addition, cellular structural alterations were observed in groups treated with ZnO NP HPPS. Conclusions: Neither ZnO NP nor HPPS activated RAW 264.7 cells, which is likely due to a low cellular uptake. The ZnO NP HPPS, however, significantly activated NF-${\kappa}B$ and up-regulated its dependent genes such as TNF-${\alpha}$, IL-1, and MCP-1. ZnO NP HPPS was also more easily taken into the RAW 264.7 cells than either ZnO NP or HPPS.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.530-537
• /
• 2014

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at $25^{\circ}C$. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.170-180
• /
• 2017

The study used jet water flow, ultra-sonication and ozonation system units to investigate impact of the unit components on water quality of stagnant Yeo-cheon River reach, Korea. Samples were collected at six locations, before operation and after 1, 3 and 6 hrs of operation. By operating the water flow unit only, dissolved oxygen increased as high as 90% after 3 hr at 25 m downstream of the device and Chl-a was reduced by 80%. Incorporating sonication, greater than 80% of Chl-a was removed even at 100 m distance from the device. Besides, total dissolved phosphorus was reduced from an average value of $420({\pm}70){\mu}g/L$ before ultrasonic irradiation to $160({\pm}40){\mu}g/L$ after the treatment. Releasing ozone into the flow with sonication, Chl-a was considerably removed from the water column and ammonia nitrogen was also decreased to average value of $20{\mu}g/L$ from $60{\mu}g/L$. However, as only $3{\ast}10^{-3}mg/L$ of ozone was used for safety purpose and due to brief reaction time it takes, effect of integrating ozone to the system covered limited area. Generally, combining sonication to jet flow is promising in preventing algal bloom formation since it has effectively removed Chl-a from the water column.