• 한국표면공학회지
• /
• 제21권3호
• /
• pp.95-102
• /
• 1988

The anodic oxidation of aniline in aqueous sulfuric acid solution on a platinum was studied. To examine of mechanism of this reaction, the date were obtained during controlled potential electrolysis, aided by computer system. The reaction mechanism was assumed the electrochemical-chemical-electrochemical(ECE) mechanism. We obtained the result that the intial charge transfer step proceeds through a radical cation, and this radical cation were bound cation led to may type of dimer in which p-aminodiphenylamine was de-electronated again to give the polymer.

• Bulletin of the Korean Chemical Society
• /
• 제16권1호
• /
• pp.47-52
• /
• 1995

The mechanism of the photodecomposition of 2-methoxy-1,2-diphenyl diazoethane has been investigated in methanol and isoprene using time-resolved laser flash photolysis techniques. The reaction of triplet carbene which is generated from 2-methoxy-1,2-diphenyl diazoethane with methanol is believed to proceed via thermal excitation to the singlet state. The activation energy and enthalpy are consistent with a mechanism involving thermal equilibrium between the triplet and singlet state followed by the reaction of the singlet with methanol to give ether.

• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1098-1105
• /
• 2007

Quantum mechanical and molecular dynamics simulation analysis has been performed on the model system for CALB (Candida antarctica lipase B) with esters to study the reaction mechanism and conformational preference of catalytic hydrolysis and the esterification reaction. Using quantum mechanical analysis, the ping-pong bi-bi mechanism was applied and energies and 3-dimensional binding configurations of the whole reaction pathways were calculated. Further molecular dynamics simulation analysis was performed on the basis of the transition state obtained from quantum mechanical study to observe the effect of structures of the substrates. Calculation results using substrates of different chain length and chiral configurations were compared for conformational preference. The calculated results showed very small influence on chain length, whereas chiral conformation showed big differences. Calculated results from molecular modeling studies have been compared qualitatively with the experimental data using racemic mixtures of (${\pm}$)-cis-4-acetamido-cyclopent-2-ene-1-ethyl acetate as substrates.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3973-3978
• /
• 2011

The reductive pinacol coupling reaction of aldehydes or ketones creating a new C-C bond has been a major tool to produce 1,2-diol compounds. The reaction mechanism is known to be composed of sequential three steps (activation, coupling, and dissociation). In this work, we studied the dissociation step of half-titanocene-based catalytic systems. Cp and $Cp^*$ derivatives of the pinacolato-bridged dinuclear complex were synthesized and evaluated as possible models for intermediates from the coupling step. We monitored $^1H$-NMR spectra of the reaction between the metalla-pinacol intermediates and $D_2O$. New reaction routes of the dissociation step including oxo- and pinacolato-dibridged dinuclear complexes and oxo-bridged multinuclear complexes have been suggested.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.242-253
• /
• 1993

The interpretation of the reaction mechanism is significant to produce the high quality welds and understand the welding processes. This investigation is important for the design of welding consumables and the selection of welding process parameters to develop the high quality welds. The objective of this study is to investigate the effect of electrochemical reactions on the transfer of alloy elements between slag and weld metal during submerged arc welding During submerged arc welding weld metal composition is shown to be controlled by two reaction mechanisms in four reaction zones. The responsible reaction mechanisms are thermochemical and electrochemical reactions. The possible reaction sites are the melted electrode tip, the detached droplet, the hot weld pool immediately below the moving electrode, and the cooling and solidifying weld pool behind the moving electrode. The possible reactions in submerged arc welding at different zones of the process is schematically shown in Figure 1.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.83-87
• /
• 2005

The kinetics of the direct synthesis of DME was studied under different conditions over a temperature range of $220\~280^{\circ}C$, syngas ratio $1.2\~ 3.0$ All experiment were carried out over hybrid catalyst, composed to a methanol synthesis catalyst (Cu/ZnO/$Al_2O_3$) and a dehydration Catalyst ($\gamma$-Al_2O_3$) The observed reaction rate qualitatively follows a Langmiur-Hinshellwood type of reaction mechanism. Such a mechanism is considered with three reaction, methanol synthesis, methanol dehydration and water gas shift reaction. From a surface reaction with dissociative adsorption of hydrogen, methanol and water, individual reaction rate was determined

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1805-1810
• /
• 2009

The adsorptions of trimethygallium (TMG) and arsine (As$H_3$) on H/Si(100)-2x1 surface were theoretically investigated. In the case of TMG adsorption, methane loss reaction, surface methylation, hydrogen loss reaction and ring closing reaction channels were found. The mechanism of As$H_3$ adsorption on the surface was also identified. Among these, the methane loss reaction depositing –Ga(C$H_3)_2$ was found to be the major channel due to its low barrier height and the large exothermicity. The surface methylation reaction is the second most favorable channel. In contrast, arsine turned out to be less reactive on the surface, implying that Arsine surface reaction would be the rate limiting step in the overall ALD process.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1179-1182
• /
• 1997

The rates for the reaction of (Z)-phenacyl (X)-benzenesulfonates with (Y)-pyridines in acetone were measured by an electrical conductivity method at 1-2000 bars and 45 ℃. The magnitudes of the Hammett reaction constants, ρX, ρY and ρZ, represent the degree of Nu-C bond formation and that of C-L bond breaking. The magnitude of correlation interaction term ρij can be used to determine the structure of the transition state (TS) for the SN reaction. As the pressure is increased, the Hammett reaction constants, ρX, |ρY| and ρZ are increased, but correlation interaction coefficient, |ρXZ| and ρYZ, are decreased. The results indicate that the reaction of (Z)-phenacyl (X)-benzenesulfonates with (Y)-pyridines probably moves from an associative SN2 to late-type SN2 mechanism by increasing pressure.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1186-1191
• /
• 1997

Solvolyses of methanesulfonyl chloride (CH3SO2Cl) in water and methanol have been studied theoretically using ab initio self-consistent reaction field (SCRF) molecular orbital method. All stationary structures including transition state on the potential energy surface in solution have been found and compared with the gas phase structures. The overall reaction occurs via a concerted SN2 mechanism with a non-cyclic trigonal bipyramidal transition state, and the activation barrier is lowered significantly in solution. The transition state for the hydrolysis reaction is looser than that for the methanolysis reaction, and this is in accord with the experimental findings that an SN2 type mechanism, which is shifted toward an SN1 process or an SAN process in the hydrolysis and alcoholysis reaction, respectively, takes place. The catalytic role of additional solvent molecules appears to be a purely general-base catalysis based on the linear transition structures. Experimental barrier can be estimated by taking into account the desolvation energy of nucleophile in the reaction of methanesulfonyl chloride with bulk solvent cluster as a nucleophile.

• 한국미생물·생명공학회지
• /
• 제19권2호
• /
• pp.163-170
• /
• 1991

Production of cyclodextrin (CD) directly from raw corn starch without liquefaction using cyclodextrin glucanotransferase (CGTase) was carried out in an agitated bead reaction system. Similar CD yield and production rate comparable with those of conventional method using liquefied starch were obtained. Especially high purity-CD in the reaction mixture without accumulation of malto-oligosaccharides was obtained. The maximum 54g/l of CD was obtained at raw starch concentration of 200g/l. CD yield was inversely proportional to raw starch concentration, and conversion yield was 0.48 at substrate concentration of 100g/l. The optimal amount of enzyme (CGTase unit/g raw starch) was found to be around 6.0. Granular structure of raw starch degraded by CGTase was observed by SEM in order to investigate the enhancing mechanism, along with those of acid or alkali pretreated raw starch, amylose, and amylopectin. Kinetic constants of CGTase on raw starch in an agitated bead reaction system were evaluated, and CGTase was competitively inhibited by CD.