• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.828-829
• /
• 2010

초경합금 성형용 코어를 이용한 고온 압축 성형방식으로 제작되기 때문에 성형용 코어의 초정밀 연산 가공 및 코어면 코팅 기술 개발이 시급한 상황이다. 따라서 본 연구에서는 성형용 초경합금 코어의 연삭가공을 수행하고, 가공 완료된 성형용 코어의 가공면에 Re-Ir 코팅을 수해, 측정을 통하여 코팅면이 표면 조도에 미치는 영향에 대하여 연구를 수행하였다.

• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.213-223
• /
• 2009

Taylor-Couette flow (i.e., flow between concentric, rotating cylinders) has long served as a paradigm for studies of hydrodynamic stability. For Newtonian fluids, the rich cascade of transitions from laminar, Couette flow to turbulent flow occurs through a set of well-characterized flow states (Taylor Vortex Flow, wavy Taylor vortices, modulated wavy vortices, etc.) that depend on the Reynolds numbers of both the inner and outer cylinders ($Re_i$ and $Re_o$). While extensive work has been done on (a) the effects of weak viscoelasticity on the first few transitions for $Re_o=0$ and (b) the effects of strong viscoelasticity in the limit of vanishing inertia ($Re_i$ and $Re_o$ both vanishing), the viscoelastic Taylor-Couette problem presents an enormous parameter space, much of which remains completely unexplored. Here we describe our recent experimental efforts to examine the effects of drag reducing polymers on the complete range of flow states observed in the Taylor-Couette problem. Of particular importance in the present work is 1) the rheological characterization of the test solutions via both shear and extensional (CaBER) rheometry, 2) the wide range of parameters examined, including $Re_i$, $Re_o$ and Elasticity number E1, and 3) the use of a consistent, conservative protocol for accessing flow states. We hope that by examining the stability changes for each flow state, we may gain insights into the importance of particular coherent structures in drag reduction, identify simple ways of screening new drag reducing additives, and improve our understanding of the mechanism of drag reduction.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1052-1059
• /
• 2003

본 논문에서는 이중충 마이크로스트립 유전체 기판을 이용하여 결합도와 격리도를 개선한 방향성 결합기를 제안하고, 설계방법을 제시하였다. 제안된 구조는 re-entrant mode 방향성 결합기의 구조를 수정하여, 결합도를 향상시키기 위해 최하층의 접지면에 어퍼쳐를 적용시킨 형태이다. 또한, 부동도체에 슬릿을 적용함으로써 격리도, S$_{11}$에 대한 정재파비, 그리고 위상차 등에 서도 우수한 특성을 얻을 수 있었다. 그 결과, 제안된 re-entrant mode 방향성 결합기는 기존의 구조보다 약 1.5 dB 정도 높은 결합도를 가질 뿐 아니라 각각 20 dB 이상의 개선된 격리도와 S$_{11}$에 대한 정재파비를 가짐을 확인할 수 있었다. 또한 위상 특성에서도 우수한 특성을 가지므로, 이로부터 제안된 결합기는 강한 결합이 필요한 다단 결합기에 사용될 수 있을 것이다.

• 대한화학회지
• /
• 제64권2호
• /
• pp.84-98
• /
• 2020

이 연구에서는 CoRe를 활용한 수업 설계가 이공계열 대학교수의 수업 전문성에 미치는 영향을 PCK의 측면에서 분석하였다. 충청도 소재의 대학교에 재직 중인 이공계열 교수 3명이 연구에 참여하였다. 강의 계획서를 수집하고 교수의 수업을 관찰한 후, 오리엔테이션을 진행하였다. 이후, 두 차례에 걸쳐 교수가 작성한 CoRe를 수집하고 이를 바탕으로 교수가 실행한 수업을 관찰하였으며, 반구조화된 면담을 실시하였다. 강의 계획서, 교수가 작성한 CoRe, 수업을 촬영한 영상, 관찰 노트, 수업 자료, 면담 전사본 등을 분석하였다. 연구 결과, 교수들은 학습목표와 학생의 특성을 명료화하고, 이를 수업에 반영하였다. 또한 단원 내용의 특성에 따른 교수전략을 수립하였으며, 학생의 이해 수준을 파악하는 것의 필요성을 인식함에 따라 평가 방법을 선정하고 이를 수업에서 활용하였다. 그러나 학습목표를 명시적으로 제시하는 것이 부족하였고, 학생의 오개념을 교수 중심으로 설명하는 것에 그쳐 새로운 개념을 유도하는 수업을 구성하는 것이 미흡하였다. 또한 학생의 사전 지식을 고려하거나 학생이 수업에 참여할 기회를 제공하는 것이 부족하였으며, 교수가 선정한 평가 방법이 효과적으로 이루어지지 않는 경우도 있었다. 이상의 결과를 바탕으로 CoRe를 활용한 교수의 수업 전문성 향상 방안을 논의하였다.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.207-216
• /
• 1995

Flow and heat transfer characteristics of mixed convection heat transfer in a rectangular en-closure with various outlets are numerically investigated. The parameters considered here include Reynolds number, Grashof number and the position of outlet. The results show streamlines, isotherms, Nusselt numbers, velocity and temperature distributions. It has been shown that as Reynolds number increases, the size of cell decreases at Re$\leq$100 and increases at Re>100 for $Gr=10^4$. There is a minimum size of cells at Re=100, $Gr=10^4$. The maximum mean Nusselt number occurs at Re=400, $Gr=10^4$ and one right outlet. The mean Nusselt numbers can be formulated by the correlation equation $Nu=C{\cdot}Gr^a{\cdot}Re^b$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.2254-2275
• /
• 2017

In this paper, we present an IND-CCA2 secure certificateless proxy re-encryption scheme in the random oracle model. A certificateless public key cryptography simplifies the certificate management in a traditional public key infrastructure and the built-in key escrow feature in an identity-based public key cryptography. Our scheme shares the merits of certificateless public key encryption cryptosystems and proxy re-encryption cryptosystems. Our certificateless proxy re-encryption scheme has several practical and useful properties - namely, multi-use, unidirectionality, non-interactivity, non-transitivity and so on. The security of our scheme bases on the standard bilinear Diffie-Hellman and the decisional Bilinear Diffie-Hellman assumptions.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1269-1270
• /
• 2006

Mg-Zn-RE alloys had a novel lond period stacking ordered (LPO) structure. Their rapidly solidified powder metallurgy (RS P/M) alloys exhibited a combination of high strength and god ductility (tensile yield strength above 550 MPa and elongation above 5%). The LPO Mg-Zn-RE RS P/M alloys had high elevated temperature strength (tensile yield strength above 380 MPa at 473 K) and exhibited a high-strain-rate superplasticity at higher temperatures. In Japan, a national project for developing high strength LPO Mg-Zn-RE RS P/M alloys has started at 2003 for 5 years, which is founded by the Ministry of Economy, Trade and Industry (METI) of Japan. In the national project, project targets in materials performances have been achieved. The developed LPO Mg-Zn-RE RS P/M alloys exhibited higher tensile yield strength, fatigue strength and corrosion resistance than high strength aluminum alloys of extra-super-duralumin (7075-T6).

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.6-9
• /
• 2012

Eu3+-doped RE2O3 (RE = Gd, Y and La) phosphors were prepared by solvothermal reaction method and their crystalline structure, phase transformation and surface morphologies were investigated by using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM). The obtained RE2O3:Eu3+ phosphors are nanocrystalline-sized. The luminescence properties of Eu3+ ions in different host materials, namely, Gd2O3, Y2O3 and La2O3 have been investigated. PACS number: 32.50.+d, 78.55.-m, 81.40.Tv.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.80-87
• /
• 2024

This paper focuses on improving accuracy in constrained computing settings by employing the ReLU (Rectified Linear Unit) activation function. The research conducted involves modifying parameters of the ReLU function and comparing performance in terms of accuracy and computational time. This paper specifically focuses on optimizing ReLU in the context of a Multilayer Perceptron (MLP) by determining the ideal values for features such as the dimensions of the linear layers and the learning rate (Ir). In order to optimize performance, the paper experiments with adjusting parameters like the size dimensions of linear layers and Ir values to induce the best performance outcomes. The experimental results show that using ReLU alone yielded the highest accuracy of 96.7% when the dimension sizes were 30 - 10 and the Ir value was 1. When combining ReLU with the Adam optimizer, the optimal model configuration had dimension sizes of 60 - 40 - 10, and an Ir value of 0.001, which resulted in the highest accuracy of 97.07%.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1013-1021
• /
• 2024

A series of experiments were performed to produce a fuel source for a molten salt reactor (MSR) through pyroprocessing technology. A simulated LiCl-KCl-UCl₃-NdCl₃ salt system was prepared, and the U element was fully recovered using a liquid cadmium cathode (LCC) by applying a constant current. As a result, the salt was purified with an UCl₃ concentration lower than 100 ppm. Subsequently, the U/RE ingot was prepared by melting U and RE metals in Y₂O₃ crucible at 1473 K as a surrogate for RE-rich ingot product from pyroprocessing. The produced ingot was sliced and used as a working electrode in LiCl-KCl-LaCl₃ salt. Only RE elements were then anodically dissolved by applying potential at - 1.7 V versus Ag/AgCl reference electrode. The RE-removed ingot product was used to produce UCl₃ via the reaction with NH4Cl in a sealed reactor.