• 제목/요약/키워드: Re-circulation

검색결과 106건 처리시간 0.034초

Systematic influence of wind incident directions on wind circulation in the re-entrant corners of high-rise buildings

  • Qureshi, M. Zahid Iqbal;Chan, A.L.S.
    • Wind and Structures
    • /
    • 제22권4호
    • /
    • pp.409-428
    • /
    • 2016
  • The mechanical and aerodynamic effect of building shape plays a dominate role in the pedestrian level wind environment. These effects have been presented in numerous studies and are available in many wind codes. However, most studies have focused on wind flow around conventional buildings and are limited to few wind directions. The present study investigated wind circulation in the re-entrant corners of cross-shaped high-rise buildings from various wind directions. The investigation focused on the pedestrian level wind environment in the re-entrant corners with different aspect ratios of building arrangements. Ninety cases of case study arrangements were evaluated using wind tunnel experimentation. The results show that for adequate wind circulation in the re-entrant corners, building orientations and separations play a critical role. Furthermore, in normal wind incident directions and at a high aspect ratio, poor wind flow was observed in the re-entrant corners. Moreover, it was noted that an optimized building orientation and aspect ratio significantly improved the wind flow in re-entrant corners and through passages. In addition, it was observed that oblique wind incident direction increased wind circulation in the re-entrant corners and through passages.

고습의 흡입 유체일 때 이젝터의 성능 변화 (Humidity Effect on the Hydrogen Re-circulation Ejector Performance)

  • 제갈승;송성진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2589-2593
    • /
    • 2008
  • In a fuel cell vehicle using polymer electrolyte membrane fuel cell(PEMFC), hydrogen is over-supplied to gain higher stack efficiency. So it is needed considering fuel efficiency to re-circulate hydrogen which is not reacted in stack. And to re-circulate hydrogen, a blower or an ejector is used. Ejector re-circulation system has several merits compared with blower system, for example no parasite energy, simple structure and no lubrication system. But the secondary flow of an ejector in fuel cell vehicle, has high humidity because of crossover problem in stack. Therefore in this paper, ejector is designed by 1-D modeling and CFD with the primary and secondary flow of hydrogen. And the ejector which has the primary and secondary flow of air, is designed to have the same Reynolds number and Mach number at the nozzle exit as the hydrogen ejector's. And this air ejector is tested while the humidity of the secondary flow is varied.

  • PDF

Re-timing 기능을 생략한 광/전/광 파장변환기의 cascadability 분석 및 측정 (Analysis and measurement of the cascadability for 2R O/E/O wavelength converter)

  • 장윤선;김광준
    • 한국광학회지
    • /
    • 제14권3호
    • /
    • pp.215-218
    • /
    • 2003
  • 2R 광/전/광 파장변환기는 이미 검증된 기술을 사용하여 간단히 구현할 수 있으며 데이터 전송율을 제한하지 않는다는 장점이 있다. 그러나, 이 방식은 각 파장변환기를 통과하면서 타이밍 지터 성분이 계속 누적되어 cascadability가 제한된다 본 논문에서는 통상적인 정현파 신호 모델 대신 보다 현실적인 비선형 신호 모델을 제안하여 시스템 성능에 미치는 타이밍 지터의 영향 및 2R 광/전/광 파장변환기의 cascadability를 이론적으로 분석하였으며, 40-km re-circulation loop 실험 장치에서 10 Gb/s 신호에 대한 cascadability를 측정하여 계산 결과와 비교하였다.

Experimental study on natural circulation using liquid nitrogen for superconducting applications

  • Choi, Yeon Suk
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제15권3호
    • /
    • pp.49-52
    • /
    • 2013
  • An experiment to investigate the natural circulation of a cryogen has been performed. The study is motivated mainly by our recent development of cryogenic cooling system for prototype superconducting cyclotron without any circulating pump. In the natural circulation loop system, a cooling channel is attached on the outer surface of the aluminium block and the liquid nitrogen passes through inside of the channel to cool the block indirectly. A cryocooler as a heat sink is located at the top to re-condense cryogenic vapor coming from the aluminium block in which electrical heater is installed as a heat source. The main dimensions are determined using the relevant analysis and the natural circulation loop is successfully fabricated. The temperature distributions in the loop are measured during initial cool-down process and in steady state, from which the modified Grashof numbers are calculated and compared with the existing correlation estimated with one-dimensional analysis for steady state flow.

진공 이젝터-디퓨져 시스템내의 비정상 유동 과정에 관한 연구 (A Study on the Transient Flow Process in a Vacuum Ejector-Diffuser System)

  • ;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.299-302
    • /
    • 2009
  • The objective of the present study is to analyze the transient flow through theejector system with the help of a computational fluid dynamics (CFD) method. An attempt is made to investigate the interesting and conflicting phenomenon of the infinite entrainment into the primary stream without an infinite mass supply from the secondary chamber. The results obtained show that the one and only condition in which an infinite mass entrainment can be possible in such types of ejectors is the generation of a re-circulation zone near the primary nozzle exit. The flow in the secondary chamber attains a state of dynamic equilibrium of pressures at the onset of the recirculation zone. A steady flow in the ejector system is valid only after this point.

  • PDF

지속가능한 패션산업활성화를 위한 리디자인 협업 사례분석 (A Case Study on Re:Design Collaboration for Sustainable Fashion Industry Revitalization)

  • 김민지;이규진
    • 패션비즈니스
    • /
    • 제26권4호
    • /
    • pp.136-153
    • /
    • 2022
  • The fashion industry is considered hazardous and a threatened to the environment. Due the negative perception, the industry should focus on sustainability as a social role. Therefore, several redesign fashion collaborations mainly focusing on renewing abandoned resources are already in place. The research method was based on previous studies, and 3 characteristics were derived: Redesign collaboration between fashion companies, Redesign collaboration between fashion & heterogeneous industries, and Redesign collaboration between the fashion industry & non-profit organizations. Those 3 characteristics were reviewed using 4 criteria. First, to establish and maximize the sustainable brand image and to be the best examples in environmental management, the organization endeavors to collaborate with various industries, institutions, and designers. Second is the expansion of the customer network through the spread of value consumption. Third is the creation of new values through a resource circulation structure. This means that the resource circulation structure system helps the partners to minimize on wastage. Fourth is the spread of de-boundary lines and the possibility of brand growth. Through collaboration with other industries, the boundaries of materials used in the fashion industry started to blur, thus expanding the continuous brand growth potential. The study derived the characteristics of redesign collaboration by systematically analyzing the cases. Further, the study looks forward to analyzing the characteristics of the products processed by redesign fashion collaborations in future research.

Thermal-hydraulic behavior simulations of the reactor cavity cooling system (RCCS) experimental facility using Flownex

  • Marcos S. Sena;Yassin A. Hassan
    • Nuclear Engineering and Technology
    • /
    • 제55권9호
    • /
    • pp.3320-3325
    • /
    • 2023
  • The scaled water-cooled Reactor Cavity Cooling System (RCCS) experimental facility reproduces a passive safety feature to be implemented in Generation IV nuclear reactors. It keeps the reactor cavity and other internal structures in operational conditions by removing heat leakage from the reactor pressure vessel. The present work uses Flownex one-dimensional thermal-fluid code to model the facility and predict the experimental thermal-hydraulic behavior. Two representative steady-state cases defined by the bulk volumetric flow rate are simulated (Re = 2,409 and Re = 11,524). Results of the cavity outlet temperature, risers' temperature profile, and volumetric flow split in the cooling panel are also compared with the experimental data and RELAP system code simulations. The comparisons are in reasonable agreement with the previous studies, demonstrating the ability of Flownex to simulate the RCCS behavior. It is found that the low Re case of 2,409, temperature and flow split are evenly distributed across the risers. On the contrary, there's an asymmetry trend in both temperature and flow split distributions for the high Re case of 11,524.

미술관 전시실의 공간형태와 동선의 상관관계 연구 - 연결로(Connectors)의 위치에 따른 공간 유형 중심으로 - (A Correlation Between Spatial Configuration and Circulation in Exhibition Space - Focused on the Position of Connectors -)

  • 장은아;이현수
    • 한국실내디자인학회논문집
    • /
    • 제24권5호
    • /
    • pp.144-152
    • /
    • 2015
  • In modern city, art museum is regarded as significant institutions because it includes educational roles beyond the means of facilities for historical exhibitions. Based on these flow, various research of museum's space with view from the operational point to the spatial analysis point has been approached. Moreover, it is required to address human behavior in art museum space on the ground that lots of audience move simultaneously. In the field of interior architecture, it is also necessary to analyze how design elements affect the human behavior directly and use the method of controling a circulation. In this research, based on the role and importance of the basic components of the interior space, re-interprets the exhibition space based on the relevant theory, to comprehensively examine the influence the shape of the space is on the substantially walking behavior. Therefore, first is to determine whether the spatial type corresponding to the position of the connectors in the exhibition space. Second is to conduct the investigation observation for gathering the actual viewing exhibition circulation. Finally, it analyzed whether the observed actual circulation and planned circulation matched. As the result, the position of the connectors is that causes the difference of the spatial configuration, which affects the viewing circulation was found. The significance of the research is to present the form to plans of the interior space as a method of reducing congestion perception of viewing circulation.

다크투어리즘 관광자의 관람동선 및 관람행태(서대문형무소 역사관을 대상으로) (Tourists' Circulations and Behaviors in Dark Tourism Site (Focused on Seodaemun Prison History Hall))

  • 아데 뜨리아나 롤리타사리;윤희정
    • 한국콘텐츠학회논문지
    • /
    • 제16권9호
    • /
    • pp.198-210
    • /
    • 2016
  • 본 연구는 다크투어리즘 관광지 중 하나인 서대문형무소 역사관을 대상으로 실제 관광자들의 관람동선과 관람행태를 분석하고자 하였다. 이를 위해 선행연구를 통해 도출된 관람동선 유형과 관람자의 행동기록 코드인 'Muse-Ethogram'을 기반으로 직접관찰법을 이용한 행태추적 조사를 실시하였다. 서대문형무소 역사관 관광자들의 관람동선과 관람행태를 분석한 결과, 제안동선(SA), 임의동선(UNA), 유도동선(DA)이 모두 나타났다. 관람자의 관람행태는 이동(M), 정지/관람(SL), 읽음(RE)이 전체적으로 가장 높은 빈도를 보였으며, 다크투어리즘만의 관람행태인 '감정을 표현함(EXP)'이라는 새로운 행태를 발견하였다. 관람자들의 행태패턴은 정지/관람-읽음-이동(SL-RE-M)의 빈도가 가장 높게 나타났다. 이상의 연구결과는 다크투어리즘 관광지의 콘텐츠 구성시 관람동선이나 관람행태, 전시방향관련 계획 및 설계 가이드라인으로 활용될 수 있을 것이다.