• 제목/요약/키워드: Re-Entry

검색결과 138건 처리시간 0.028초

추정을 이용한 재진입 궤적의 정상상태 오차감소 (Reduction of Steady-State Error Using Estimation for Re-Entry Trajectory)

  • 박수홍;이대우
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
    • /
    • pp.130-134
    • /
    • 2001
  • In the re-entry control system, errors apt to induce because the time derivative of drag acceleration is analytically estimated. Still more, the difficulty of estimation of the exact drag coefficient in hypersonic velocity and the nun-reality of the scale height cause a steady-state drag error. This paper proposes the additional method of the disturbance observer. This reduces the steady-state drag error according to the following series. First, this method estimates a error in drag acceleration time derivative by the analytic calculation and then creates the new drag acceleration time derivative using the estimated error. The performance of the re-entry control system is verified about 32 reference trajectories.

  • PDF

몬테-칼로 모의실험을 이용한 대기권 재진입 시스템의 불확실성 성능 평가 (Evaluation of Performance of Atmospheric Re-Entry System for the Uncertainties Using the Monte-Carlo Simulation)

  • 이대우;조겸래;오세종
    • 한국항공우주학회지
    • /
    • 제30권7호
    • /
    • pp.51-60
    • /
    • 2002
  • 통계학적 해석인 몬테-칼로 모의실험은 대기권 재진입 분산의 결과인 낙하예정지역뿐만 아니라 상태변수들의 최종조건들을 조사하는데도 사용된다. 본 논문에서 재진입 분산은 위도, 경도, 고도, 뱅크각, 비행경로각, 기수 오차, 그리고 항속거리로 생성되는 $7\times7$ 공분산 행렬로 한정된다. 감속을 목표로 하는 대기권 재진입시 이것들에 영향을 미치는 오차 원인들은 대기밀도, 온도, 초기오차, 바람, 그리고 항력계수의 추정오차 등에 관련된 불확실성들로서 이들 오차의 $3{\sigma}_n$와 공칭 비행궤적을 사용해서 상태변수의 공분산 행렬은 궤적 오차 해석을 수행함으로 결정될 수 있다. 재진입에 대한 몬테-칼로법의 적용에 있어서 주요 고려할 점은 교란궤적, 뱅크역전, 그리고 이 제적들 각각에 대한 최종 낙하지점의 결정이다. 본 논문은 불확실성에 대한 결과를 공력계수와 뱅크역전의 관점에서 해석한다.

Assessment of the aerodynamic and aerothermodynamic performance of a high-lift reentry vehicle

  • Pezzella, Giuseppe
    • Advances in aircraft and spacecraft science
    • /
    • 제2권2호
    • /
    • pp.109-124
    • /
    • 2015
  • This paper deals with the aerodynamic and aerothermodynamic trade-off analysis of a hypersonic flying test bed. Such vehicle will have to be launched with an expendable launcher and shall re-enter the Earth atmosphere allowing to perform several experiments on critical re-entry phenomena. The demonstrator under study is a re-entry space glider characterized by a relatively simple vehicle architecture able to validate hypersonic aerothermodynamic design database and passenger experiments, including thermal shield and hot structures. A summary review of the aerodynamic characteristics of two flying test bed concepts, compliant with a phase-A design level, has been provided hereinafter. Several design results, based both on engineering approach and computational fluid dynamics, are reported and discussed in the paper.

재진입 비행체의 진입 및 착륙단계 경로 생성 및 퍼지제어기 설계 (Trajectory Planning and Fuzzy Controller Design of a Re-entry vehicle on Approach and Landing phase)

  • 민찬오;조성진;이대우
    • 한국항공우주학회지
    • /
    • 제38권2호
    • /
    • pp.150-159
    • /
    • 2010
  • 재진입 비행체의 Approach & Landing단계는 Steep Glideslope 단계, Circular Flare 단계, Flare Maneuver 단계로 이루어지며, 본 논문에서는 실시간 경로 생성을 위하여 기하학적 조건을 이용한 기준궤적 생성 알고리즘을 사용하였다. 이를 통하여 재진입비행체의 착륙 안정성을 고려한 기준궤적을 빠른 시간 안에 생성할 수 있다. 그리고 본 논문에서는 비선형 시스템에 대하여 강건성을 가지는 Mamdani Fuzzy PD Controller를 통한 종방향 및 횡방향 제어기를 설계하였다. 또한 Downrange 와 Crossrange의 초기 오차를 포함하는 시뮬레이션을 수행하여, 제안된 Fuzzy 제어기의 우수한 성능을 확인하였다.

Comparison of Ballistic-Coefficient-Based Estimation Algorithms for Precise Tracking of a Re-Entry Vehicle and its Impact Point Prediction

  • Moon, Kyung Rok;Kim, Tae Han;Song, Taek Lyul
    • Journal of Astronomy and Space Sciences
    • /
    • 제29권4호
    • /
    • pp.363-374
    • /
    • 2012
  • This paper studies the problem of tracking a re-entry vehicle (RV) in order to predict its impact point on the ground. Re-entry target dynamics combined with super-high speed has a complex non-linearity due to ballistic coefficient variations. However, it is difficult to construct a database for the ballistic coefficient of a unknown vehicle for a wide range of variations, thus the reliability of target tracking performance cannot be guaranteed if accurate ballistic coefficient estimation is not achieved. Various techniques for ballistic coefficient estimation have been previously proposed, but limitations exist for the estimation of non-linear parts accurately without obtaining prior information. In this paper we propose the ballistic coefficient ${\beta}$ model-based interacting multiple model-extended Kalman filter (${\beta}$-IMM-EKF) for precise tracking of an RV. To evaluate the performance, other ballistic coefficient model based filters, which are gamma augmented filter, gamma bootstrapped filter were compared and assessed with the proposed ${\beta}$-IMM-EKF for precise tracking of an RV.

지구 재진입체의 특성에 따른 재진입사례 및 생존특성 분석 (Analyses for Re-entry Event and Survival characteristics according to Characters of Re-entering Space Objects)

  • 정순우;민찬오;이대우;조겸래
    • 한국항행학회논문지
    • /
    • 제17권1호
    • /
    • pp.80-89
    • /
    • 2013
  • 1957년 10월 4일 인류최초의 위성 스푸트니크1호가 발사된 이래로 지구저궤도에서 대기권으로 재진입하는 물체의 양은 지속적으로 증가해왔다. 대부분의 재진입체들은 공력가열에 의해 타버려 생존하기 어렵다. 그러나 단 하나의 물체라도 지표면으로 떨어질 경우 인명 및 재산피해를 유발할 수 있다. 우주활동의 부산물로 발생하는 폐기위성, 로켓부스터, 압력탱크, 폐기우주정거장 등 지구에 재진입하는 물체는 꾸준히 늘어왔다. 대부분의 재진입체는 고도 50km~80km에서 소각되고 10%~40% 가량이 살아남아 지상으로 추락한다. 따라서 본 논문은 다양한 사례를 종합하여 재진입체의 생존특성을 분석하였다.

저궤도 재진입 비행체의 공력해석 (AERODYNAMIC ANALYSIS OF SUB-ORBITAL RE-ENTRY VEHICLE)

  • 김철완;이융교;이대성
    • 한국전산유체공학회지
    • /
    • 제13권2호
    • /
    • pp.1-7
    • /
    • 2008
  • For Aerodynamic analysis of vehicle at altitude, 100km, the validity of governing equations based on continuum model, was reviewed. Also, as the preliminary study for the sub-orbital space plane development, a candidate geometry was suggested and computational fluid dynamic(CFD) analysis was performed for various angles of attack in subsonic and supersonic flow regimes to analyze the aerodynamic characteristics and performance. The inviscid flow analyses showed that the stall starts at angle of attack above $20^{\circ}$, the maximum drag is generated at angle of attack, $87^{\circ}$ and the maximum lift to drag ratio is about 8 in subsonic flow. In supersonic, the stall angle is about $40^{\circ}$ and the maximum drag is generated at angle of attack, $90^{\circ}$. Also, mach number distribution of re-entry vehicle was computed versus altitudes.

Reference Trajectory Analysis and Trajectory Control by Bank Angle for Re-Entry Vehicle

  • Cho, Kyeum-Rae;Lee, Dae-Woo
    • Journal of Mechanical Science and Technology
    • /
    • 제16권6호
    • /
    • pp.745-756
    • /
    • 2002
  • The re-entry problem consists of guidance design and trajectory control. This paper summarizes the detailed relationships between the velocity, drag acceleration and altitude in determining reference trajectories. The computational issues are also addressed, and the performance of the proposed simple nonlinear control of a bank angle for the longitudinal/ lateral trajectory is demonstrated. In particular, the fixed bank angle methods that can reduce the drag acceleration errors at low-speeds are proposed. The importance of bank reversals with respect to the azimuth errors Is also elucidated.

Evaluation of the Performance of Re-entry System for the Typical Uncertainties

  • L., Daewoo;C., Kyeumrae;P., Soohong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.156.4-156
    • /
    • 2001
  • The uncertainties of an atmospheric re-entry flight with respect to stability and controllability are aerodynamic error, measurement error of the angle of attack, variation of dynamic pressure, wind, and trim position of the control surfaces, etc. During hypersonic flight, a future angle of attack is biased from a nominal schedule. In order words, because the angle of attack is estimated from the navigation data, estimation error occurs due to wind, atmospheric density variation, etc. Error models used in this study, include a standard deviation of +-3 sigma, and are the normal distribution of statistics. This paper shows the appraisement of tracking performance onto the reference trajectory, satisfaction of the initial condition of TAEM about the re-entry system.

  • PDF

Computation of aerodynamic coefficients of a re-entry vehicle at Mach 6

  • R.C. Mehta;E. Rathakrishnan
    • Advances in aircraft and spacecraft science
    • /
    • 제10권5호
    • /
    • pp.457-471
    • /
    • 2023
  • The paper evaluates the aerodynamic coefficients on a blunt-nose re-entry capsule with a conical cross-section followed by a cone-flare body. A computer code is developed to solve three-dimensional compressible inviscid equationsfor flow over a Space Recovery Experiment (SRE) configuration at different flare-cone half-angle at Mach 6 and angle of attack up to 5°, at 1° interval. The surface pressure variation is numerically integrated to obtain the aerodynamic forces and pitching moment. The numerical analysis reveals the influence of flare-cone geometry on the flow characteristics and aerodynamic coefficients. The numerical results agree with wind tunnel results. Increase of cone-flare angle from 25° to 35° results in increase of normal force slope, axial forebody drag, base drag and location of centre of pressure by 62.5%, 56.2% and 33.13%, respectively, from the basic configuration ofthe SRE of 25°.