• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.133-138
• /
• 2018

The measurement of gamma-ray spectrum of $^{nat}W(p,xn)$ reaction with natural tungsten were performed by using a high energy proton generated from a 100-MeV proton linear accelerator of the Korea Multi-purpose Accelerator Complex (KOMAC). Gamma rays generated by various nuclides generated through the nuclide were measured using a gamma-ray spectroscopy system composed of HPGe detector. A gamma-ray standard source was used for energy calibration and efficiency measurement of the detector. Analysis of the gamma rays observed in the measured spectra showed that the radionuclides produced were $^{167}Re$, $^{178}Re$, $^{179}Re$, $^{180}Re$, $^{181}Re$, $^{182}Re$, $^{184}Re$, $^{172}Ta$, $^{174}Ta$, $^{178}Ta$, $^{182}Ta$, $^{184}Ta$, $^{175}W$, $^{176}W$, $^{177}W$ and $^{179}W$. Nuclides were generated. The results of this study will be applied to nuclear fusion, astrophysics, and nuclear medicine applications in the future.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.10
• /
• pp.303-308
• /
• 2020

The ReLU(Rectified Linear Unit) function has been dominantly used as a standard activation function in most deep artificial neural network models since it was proposed. Later, Leaky ReLU, Swish, and Mish activation functions were presented to replace ReLU, which showed improved performance over existing ReLU function in image classification task. Therefore, we recognized the need to experiment with whether performance improvements could be achieved by replacing the RELU with other activation functions in the super resolution task. In this paper, the performance was compared by changing the activation functions in EDSR model, which showed stable performance in the super resolution task. As a result, in experiments conducted with changing the activation function of EDSR, when the resolution was converted to double, the existing activation function, ReLU, showed similar or higher performance than the other activation functions used in the experiment. When the resolution was converted to four times, Leaky ReLU and Swish function showed slightly improved performance over ReLU. PSNR and SSIM, which can quantitatively evaluate the quality of images, were able to identify average performance improvements of 0.06%, 0.05% when using Leaky ReLU, and average performance improvements of 0.06% and 0.03% when using Swish. When the resolution is converted to eight times, the Mish function shows a slight average performance improvement over the ReLU. Using Mish, PSNR and SSIM were able to identify an average of 0.06% and 0.02% performance improvement over the RELU. In conclusion, Leaky ReLU and Swish showed improved performance compared to ReLU for super resolution that converts resolution four times and Mish showed improved performance compared to ReLU for super resolution that converts resolution eight times. In future study, we should conduct comparative experiments to replace activation functions with Leaky ReLU, Swish and Mish to improve performance in other super resolution models.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.142-149
• /
• 2013

As we, human expand its everyday life boundary to the geosynchronous orbit, we have experienced frequent chance of the atmospheric re-entry and surface impact of space objects(satellite and space debris). Recently a satellite re-entry monitoring room in Korea has been operated to predict the time and the location of the re-entry of space objects. However, we do not have a domestic version of a numerical re-entry model for normal operation using TLE (Two line Element) information from the United States Strategic Command yet. The space information from the several space operation centers has been used to analyse the re-entry situations. In this paper, the re-entry time is calculated with TLE based on the several atmosphere models, the result is comprehensively analyzed, a new re-entry case model fitted from the result of the predicted satellite re-entry times by a new Rubber Sheet Shift Method used by the domestic satellite re-entry room is suggested.

• Journal of the Korean Society of Costume
• /
• v.65 no.5
• /
• pp.113-125
• /
• 2015

The purpose of this paper is to study the $boutonni{\grave{e}}re$, a floral decoration, history of $boutonni{\grave{e}}re$, a floral decoration, with a focus on its aesthetics, its practical use and its traditional meaning. After the examination of its history, the paper, recreated the proceeds by taking into consideration both the contemporary men's fashion, as well as the $boutonni{\grave{e}}re$ designs of the past. The three factors of contemporary $boutonni{\grave{e}}re$ design, in brief, are its historical meaning, the visual aesthetics and the wearability. In this paper, the research and design steps are as followed below. First, the paper examined the history of men's fashion leading up to the twenty-first century in order to get a deeper understanding of the history of $boutonni{\grave{e}}re$. Second, the paper attempted to find the most suitable fabric materials and flowers for the $boutonni{\grave{e}}re$, in order to produce diverse $boutonni{\grave{e}}re$ that can be worn in any season and occasion. As for the fabrics that can be used to make the $boutonni{\grave{e}}re$, organza can be used for the S/S season, and wool, tweed and suede can be used for the F/W season. The major characteristics that differentiate the kinds of $boutonni{\grave{e}}re$ are the "Carnation" and the "Rose of Sharon". The 'Rose of Sharon' $boutonni{\grave{e}}re$ as the symbol of our nation possesses an intricate meaning and practical function, so that this $boutonni{\grave{e}}re$ is used as an alternative badge of the national assembly and other social-national institutions and their members. This idea expands into other social and individual features that the $boutonni{\grave{e}}re$ is a differentiated fashion item that provides other personal styles and expresses individuality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.504-507
• /
• 2020

ReLU(Rectified Linear Unit) 함수는 제안된 이후로 대부분의 깊은 인공신경망 모델들에서 표준 활성함수로써 지배적으로 사용되었다. 이후에 ReLU 를 대체하기 위해 Leaky ReLU, Swish, Mish 활성함수가 제시되었는데, 이들은 영상 분류 과업에서 기존 ReLU 함수 보다 향상된 성능을 보였다. 따라서 초해상화(Super Resolution) 과업에서도 ReLU 를 다른 활성함수들로 대체하여 성능 향상을 얻을 수 있는지 실험해볼 필요성을 느꼈다. 본 연구에서는 초해상화 과업에서 안정적인 성능을 보이는 EDSR(Enhanced Deep Super-Resolution Network) 모델의 활성함수들을 변경하면서 성능을 비교하였다. 결과적으로 EDSR 의 활성함수를 변경하면서 진행한 실험에서 해상도를 2 배로 변환하는 경우, 기존 활성함수인 ReLU 가 실험에 사용된 다른 활성함수들 보다 비슷하거나 높은 성능을 보였다. 하지만 해상도를 4 배로 변환하는 경우에서는 Leaky ReLU 와 Swish 함수가 기존 ReLU 함수대비 다소 향상된 성능을 보임을 확인하였다. 구체적으로 Leaky ReLU 를 사용했을 때 기존 ReLU 보다 영상의 품질을 정량적으로 평가할 수 있는 PSNR 과 SSIM 평가지표가 평균 0.06%, 0.05%, Swish 를 사용했을 때는 평균 0.06%, 0.03%의 성능 향상을 확인할 수 있었다. 4 배의 해상도를 높이는 초해상화의 경우, Leaky ReLU 와 Swish 가 ReLU 대비 향상된 성능을 보였기 때문에 향후 연구에서는 다른 초해상화 모델에서도 성능 향상을 위해 활성함수를 Leaky ReLU 나 Swish 로 대체하는 비교실험을 수행하는 것도 필요하다고 판단된다.

• Wind and Structures
• /
• v.30 no.5
• /
• pp.475-483
• /
• 2020

This work investigates Reynolds number Re (= 50 - 200) effects on the flows around a single cylinder and the two tandem (center-to-center spacing L^⁎= L/D = 4) cylinders, each of a diameter D. Vorticity structures, Strouhal numbers, and time-mean and fluctuating forces are presented and discussed. For the single cylinder, with increasing Re in the range examined, the vorticity magnitude, Strouhal number and fluctuating lift all monotonically rise but time-mean drag, vortex formation length, and lateral distance between the two rows of vortices all shrink. For the two tandem cylinders, the increase in Re leads to the formation of three distinct flows, namely reattachment flow (50 ≤ Re ≤ 75), transition flow (75 < Re < 100), and coshedding flow (100 ≤ Re ≤ 200). The reattachment flow at Re = 50 is steady. When Re is increased from 75 to 200, the Strouhal number of the two cylinders, jumping from 0.113 to 0.15 in the transition flow regime, swells to 0.188. The two-cylinder flow is more sensitive to Re than the single cylinder flow. Fluctuating lift is greater for the downstream cylinder than the upstream cylinder while time-mean drag is higher for the upstream cylinder than for the other. The time-mean drags of the upstream cylinder and single cylinder behaves similar to each other, both declining with increasing Re.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.2
• /
• pp.99-106
• /
• 2008

In this paper, we have proposed a novel re-marking strategy at tbe ingressive edge router to improve TCP fairness of DiffServ Assured Services. Our re-marking strategy introduces a configuration method of the Temporary Permitted Rate (TPR). By using this new configuration method of TPR, IN packets of greedy TCP flows are re-marked to OUT packets pertinently and constantly whenever the network traffic changes. Simulation Results show that this novel re-marking strategy can regulate the packet transmission rate of each TCP flow to the contract rate without a decrease in the link utilization.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.187-198
• /
• 2020

This study investigates the determinants of the likelihood of a tax re-audit in Korea. It adopts a researcher-administered questionnaire survey method for data collection. The survey questionnaire is randomly distributed to 1,120 individuals with tax-related knowledge and experience. Using a final sample of 342 responses, we conduct a cross-sectional regression analysis to test our hypotheses. The results show that the level of tax non-compliance significantly affects the likelihood of a tax re-audit. This finding suggests that the increase in re-audits in Korea is attributable to the tendency of the tax authority to conduct a re-audit to detect taxpayers' non-compliance behavior by excessively broadening the scope of re-audits. This study also finds that the level of tax non-compliance is influenced by the perception of procedural unfairness, measured by operational inconsistency and regulatory lack of clarity. Lastly, the results reveal that the level of tax non-compliance mediates the relationship between the perception of procedural unfairness and likelihood of a tax re-audit. This finding indicates that enhancing procedural fairness could fundamentally reduce unnecessary re-audits that infringe on the rights of taxpayers, as the likelihood of a tax re-audit is not solely determined by the level of tax non-compliance but also by perceived procedural fairness.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.219-223
• /
• 2011

Rhenium-Iridium(Re-Ir) thin films were deposited onto the tungsten carbide(WC) molding core by sputtering system. The Re-Ir films were prepared by multi-target sputtering with iridium, rhenium and chromium as the sources. Argon and nitrogen were inlet into the chamber to be the plasma and reactive gases. The Re-Ir thin films were prepared with targets having atomic percent of 3:7 and the Re-Ir thin films were formed with 240 nm thickness. The Re-Ir thin films on tungsten carbide molding core were analyzed by scanning electron microscope(SEM) and surface roughness. Also, adhesion strength and coefficient friction of Re-Ir thin film were examined. The Re-Ir coating technique has been intensive efforts in the field of coating process because the coating technique and process have been their feature, like hardness, high elasticity, abrasion resistance and mechanical stability and also have been applied widely the industrial and biomedical areas. In this report, tungsten carbide(WC) molding core was manufactures using high performance precision machining and the efforts of Re-Ir coating on the surface roughness.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.24-40
• /
• 2023

Contemporary consumers' acceptance of second-hand products has been increasingly improving worldwide, especially in China. Based on the Extended Unified Theory of Acceptance and Use of Technology, we developed and empirically validated a research framework to predict consumers' motivation to use re-commerce platforms. We explored the diverse factors influencing mobile commerce usage through re-commerce platforms. Furthermore, this study investigated the role of gender differences as a factor moderating the association between several constructs and the intention to use re-commerce platforms. A total of 226 consumer responses were collected. The results indicated that hedonic motivation, performance expectancy, consumer habits, social influence, and price value affect consumers' attitudes toward re-commerce platforms. The effects of the attitude toward re-commerce platforms on the intention to use these platforms were also statistically significant. When effort expectancy, hedonic motivation, and consumer habits in re-commerce platform usage increase, male consumers' attitude toward its usage, in particular, also increases. Meanwhile, when performance expectancy, hedonic motivation, and consumer habits in re-commerce platform usage increase, the attitude toward its usage increases among female consumers. Moreover, our results indicate that the two gender groups present different characteristics regarding re-commerce platform usage. Therefore, this study offers a theoretical basis for future analyses of second-hand trade.