• Journal of Life Science
• /
• v.34 no.4
• /
• pp.236-244
• /
• 2024

Melanin is a natural pigment found in most plants and animals, and it is involved in determining the color of the skin and hair. Melanogenesis is a reactive occurrence in melanocytes aiming to protect the skin from external stimuli, such as ultraviolet rays. Tyrosine is involved in the biosynthesis of the substrate tyrosine into melanin. However, melanin overproduction can lead to skin diseases, such as melasma, blotching, hyperpigmentation, and skin cancer. Although many studies have been conducted on whitening substances, such as kojic acid and arbutin, some countries have banned or refrained from using them due to their side effects. Therefore, this study assessed the potential of horseradish (HR) as a new whitening agent in cosmetic products. For efficient extraction, subcritical water extraction was conducted. The results showed that the horseradish subcritical water 200℃ (SW 200) extract showed high DPPH radical scavenging ability, total phenolic contents (TPC), inhibiting tyrosinase activity and inhibiting melanin production of B16-F10 melanoma cell lines. To investigate its cytotoxicity to the B16-F10 melanoma cell lines, MTT reduction assay and morphological changes were observed. No cytotoxicity was found in horseradish methanol extract and SW 200. In conclusion, this research suggests the possibility of horseradish subcritical water may be useful as a natural whitening ingredient to be used in cosmetic products.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.819-825
• /
• 2024

The reason for recording dose data when using a diagnostic radiation source is to record and manage the dose to healthcare personnel and patients. The purpose of this study was to verify the difference in radiation dose when using diagnostic radiation generating devices and to inform users' awareness of dose reduction through measurement and analysis of dose in situations with and without shielding. The dose analysis of each equipment for two Korean C-arms and two German C-arms showed that the Korean FPD type C-arm had the highest dose value, followed by the German I.I type C-arm, German FPD type C-arm, Korean, and I.I type C-arm. The results of the dose analysis with and without shielding showed that the dose to the human phantom in a normal atmosphere increased by about 2 times due to scattered radiation, but the dose to the human phantom was reduced by about 5 times by wearing a shield (0.5mm/lead apron). More important than the management of radiation dose is the study of how to reduce exposure when using radiation, and since the radiation dose output from different equipment is different, it is necessary to provide dose information with and without shielding.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.143-151
• /
• 2024

Ozone is a colorless, toxic gas that is produced when nitrogen oxides and hydrocarbons undergo a photochemical oxidation reaction in the sun's rays. Even at low concentrations, it affects the respiratory system, causing coughing and other harmful effects. It was confirmed that ozone was generated from nitrogen plasma among cosmetic raw materials, and it was found that the concentration of ozone decreased after 1 day. On the other hand, ozone was not detected in ozone-free plasma generated with argon gas. Therefore, we aimed to produce ozone-free cosmetics by utilizing ozone-free plasma. For efficient plasma processing, the non-sinking method was utilized to inject the plasma into layer separation mists, toners, and ampoules, and the stability was observed. It was found that the successful injection of plasma in the layer separation mist was higher than the other two formulations, but decreased sharply compared to the toner and ampoule. It was found that the ozone-free plasma used did not affect the stability of the layer separation mist, toner, and ampoule under low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃, 50 ℃) conditions. Therefore, this study suggests the importance of ozone-free plasma for cosmetic potential and stability of each formulation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.153-161
• /
• 2024

Vitamin D is a fat-soluble vitamin that is mainly produced in the skin by UV rays. Along with melatonin, it is a representative chronobiotic substance, and the skin plays an important role in distinguishing between day and night. However, vitamin D cannot be used directly in cosmetics because it is a vitamin that acts as a coenzyme and plays a hormonal role in regulating the expression of various types of genes. Therefore, it was to investigate the skin efficacy of provitamin D (7-dehydrocholesterol), a vitamin D precursor that can be used in cosmetics. Our findings reveal that pro vitamin D can effectively inhibit the expression of tyrosinase, the melanin-producing enzyme, thereby attenuating melanin synthesis. This skin tone regulatory effect has been corroborated in vitro using artificial skin models. Additionally, pro vitamin D demonstrated anti-inflammatory properties by suppressing the expression of TNFa and, upon conversion to vitamin D through UV exposure, it was observed to induce the production of the antimicrobial peptide CAMP (LL-37). The inhibitory effect of pro vitamin D on melanin production appears to be a result of it reducing the UV absorption capacity of melanin, thereby inducing the conversion of pro D to vitamin D. Utilizing pro vitamin D in cosmetic formulations could not only modulate skin tone and enhance skin immunity but also expect to contribute to other cutaneous benefits as anti-aging and barrier function improvement with everyday UV exposure. This multifaceted efficacy positions pro vitamin D as a promising ingredient in advancing the formulation of skin care products.

• Journal of the Economic Geographical Society of Korea
• /
• v.8 no.1
• /
• pp.153-169
• /
• 2005

In this study, we analysed the state of the fisheries in Chungnam around 1910 from Hangook Susanji. As a result, there were about 30 ports in the west coast area in Chungnam, and we can classify their locations into 5 types Type I is located in small and mid sized rivers. Type II is located in a costal port. Type III is ports facing the open sea, and type IV is ports in a bay. Type V is ports on islands of coast. Species of fish are porges, mackerels, sting rays, croakers, hairtails, shrimps, etc. The base of fishing porge was Jukdo and Yeondo. The fishing banks of croakers are formed from Chilsantan, Jeonlado to the area of seashore, Chungnam. Hairtails were caught near all the areas of seashore. Salt manufacturing is done near all coasts of Chungnam, Seocheon-bay, Ungcheon-bay, Ocheon-bay, Anmyeon island, Taean, Dangjin area, etc represent this work. Especially, the salt which was produced in Taeangun was so famous that it was called ' Taeansalt'. In the Kum-river area there were 32 fishing villages. Freshwater fish were caught in the upper stream area and the mouth of Geumgang, down stream, was the center for producing Baengeo. There were 23 fishing villages, and the species consisted of croaker, hairtail, Forge, gray mullet, sting ray, sharks, anchovy, shrimps, etc in Biin-bay. The coast of Boryeong had about 33 fishing villages, but their fishing industry was not developed more than their good salt manufacturing. Though there are records that Chunsu-bay had 28 fishing villages, Taean peninsula and Garolim-bay had about 70 fishing villages, and Asan-bay area had about 55 fishing villages, they were developed a little, but not more than Weir fisheries or salt manufacture on the base of salt area and the tideland because these areas were just for farming. South of Anmyeon island of West coast island areas is the biggest area of Stow nets on stakes fishing and the island areas down mouth of Kum river were centers for producing porge.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.325-340
• /
• 1996

Along with traditional goal of 'straightening teeth', today's orthodontics put more and more emphasis on facial esthetics. Naturally, the importance of soft tissue, which dictates one's facial form, is noticed. There have been many cephalometric studies on growth of hard tissue ; however, only a few on that of soft tissue. In Korea, various methods of sampling, measuring and analysing were used to study soft tissue changes, and yet, soft tissue changes along with process of normal growth have not been studied. The author carried out this study as a part of semi-longitudinal study on craniofacial growth and development of Korean children from ages of six to seventeen. 409 boys and 436 girls who'd had no systemic disease for the last three years and shown normal developmental and occlusal status were chosen as subjects. Cephalometric X-rays were taken of each subject, and facial form, lip position & form, nose form, and lip thickness were measured. Mean values and standard deviations were calculated according to age and gender, and figures and tables were drawn accordingly. The following results were obtained: 1. In respect to facial form, boys showed growth for longer period compared to girls. Also, lower face showed higher growth rate than upper face. 2. There was not much change in thickness of upper and lower lips with age; however, they appeared more prominent compared to caucasian children. 3. Nose grew horizontally with age. 4. Horizontal thickness of lower face increased with age, and upper lip thickness at nose base[A-Sn(FH)] showed more growth than anywhere else.

• Korean Journal of Ichthyology
• /
• v.11 no.1
• /
• pp.94-101
• /
• 1999

This study was conducted to observe the early life history of sea bass, Lateolabrax japonicus. The fertilized eggs were spherical in shape and turned out to be separative and floated. Their membrane and yolk having 1~5 oil globule were transparent. Fertilized eggs were measured to be 1.33~1.46 mm in diameter. Hatching of eggs were started at 74 hrs 15 mins, 54 hrs 55 mins, 50 hrs 45 mins, after fertilization in water temperature $16.0^{\circ}C$, $18.0^{\circ}C$, $20.0^{\circ}C$ respectively. The newly hatching larvae were 3.79~3.97 mm in total length with 35~37 myomeres, and mouth and anus were closed. Melanophores were distributed on the up side of head, upper jaw and margins of the body. The 5 days after hatching larvae measured 4.78~5.24 mm in total length, yolk were completely absorbed, and transformed to postlarval stage. In this time, mouth of larvae was opened, and also melanophores were presented on the lower jaw. Head of larvae grew remarkably. The 21~22 days after hatching, total length of the larvae was 7.15~8.12 mm, the caudal fin rays began to differentiation. In 31 days after hatching, the larva were 8.46~9.16 mm in total length, and tip of the caudal notochord flexed $45^{\circ}$. The larvae reached to the juvenile stage with all the fins were developed at 61 days after hatching and attained 16.28~17.31 mm in total length.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1992

The gobiid fish, Luciogobius guttalus Gill has an anguilliform with some blackish and reddish brown color in life. It grows up to 90mm in total length. The specimens have been collected from several localities in the southern parts of Korea and Hokkaido, Japan. During the ebb tide, the fish was found in high level of intertidal zone exposed to the air among pebbles in the hollows and slopes of rocks. There are also some other small gobiid fishes comprising 3 species of relative gobies and 1 species of blennioid fish. A total of 5 egg masses were collected from the coast of Haeundae in April to May 1990. Each egg mass was deposited in one layer on the underside of a stone embedded in pebbles and guarded by the male parent. The eggs are club-shaped ranging from 2.71 to 2.80mm in long axis and from 0.65 to 0.74mm in short axis. The eggs were hatched in 98 hours after incubatied at the temperature varying from 19.5 to $25.5^{\circ}C$The newly hatched larvae were from 3.85 to 4.00mm in total length with 35~36 myomeres. In eleven days after hatching, total length reached 5.50mm. The part of the fin-fold of the future dorsal and anal fins became high. In sixteen days after hatching, the lavae averaged 6.20mm in total length and the caudal notochord flex at $45^{\circ}$. The larvae reached the juvenile stage in 48~50 days after hatching and attained 12.80~14.00mm in total length, and all fin-rays was formed. Ossification of the cranium took place at 5.50mm of mean total length in parasphenoid and basioccipital. Ossification of the visceral skeleton occurred in areas where active movements of bones are required, notalbly in the parts of feeding and respiration. Vertebrae began to develop from the anterior end to ossify posteriorly. Neural and haemal spines of vertebrae ossified always prior to the corresponding centra. When larvae reached to about 6.60mm in mean total length (17~18 days after hatching), jaw bones were more repidly ossified than vertebrae and cranium. Ossification of all bones nearly completed when the larvae reached to 13.40mm in mean total length (47~50 days after hatching).

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.350-359
• /
• 2007

The egg development and morphological change of larvae and juveniles of the starry flounder, Platichthys stellatus were observed in laboratory. Fertilized eggs of the species, 1.09~1.19 mm (mean $1.13{\pm}0.03mm$, n=50) in diameter, were floating, colorless, transparent in shape and lacked in oil globules. The eggs hatched out 121 hours after fertilization at water temperature $8.2{\sim}11.2^{\circ}C$. The size of the hatched larvae were 2.58~2.89 mm (mean $2.67{\pm}0.09mm$) in total length, their mouth and anus were not open yet and myotome number was 14+27=41. Melanophore and xanthophore appeared on the notochord and digestive organ and the margin of membrane fin, on the yolk sac and eyes were lacking in pigment cells. 5 days after hatching the larvae attained 4.30~4.97 mm (mean$4.74{\pm}0.21mm$) in TL, and their mouth and anus were open. 10 days after hatching the larvae transformed to postlarval stage and they were 4.67~5.75 mm in TL (mean $5.30{\pm}0.31mm$), and absorbing the yolk completely. Feeding activity increased as the mouth became larger. At 23 days, the larvae attained 6.69~8.82 mm in TL (mean $7.85{\pm}0.75mm$), and the right eye was started moving to the left side of the head. At 52 days, the juveniles attained 10.99~17.06 mm in TL (mean $13.50{\pm}1.67mm$). The right eye was moved completely onto the left side. All of the fins had completed set of the fin rays (D. 64~67: A. 45~51: P. 11: V. 6: C. 19).

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.183-195
• /
• 1999

Growth and development evaluation of patients with growth potential is of great importance for orthodontic treatment planning. Timing of orthodontic intervention greatly depends on one's developmental status, thus if there is a difference in skeletal maturation among malocclusion types different treatment timing should be applied. The objective of this study was to evaluate and compare skeletal maturation among different malocclusion types. The samples used in this study was 38 Class I, 36 Class II and 33 ClassIII females aging from 8 to 10 years. Handwrist X-rays were taken with 6 month interval till 12-13 years of age. The results were as follows. 1. There was no skeletal maturity difference among different malocclusion types. 2. The hamular process of hamate was observed at $9.16{\pm}0.72$ years, pisiform bone at $9.13{\pm}0.71$ years and the ulnar sesamoid at $10.34{\pm}0.84$ years. 3. The timing of epiphyseal capping on the third finger was $10.96{\pm}0.80$ years for distal phalanx and $11.27{\pm}0.87$ years for middle phalanx, $11.12{\pm}0.85$ years for proximal phalanx of the first finger, $11.21{\pm}0.82$ years for radius and $11.62{\pm}0.85$ years for middle phalanx of the fifth finger. 4. The appearance of pisiform bone showed high correlation with appearance of hamular process of hamate(r=0.91) and ulnar sesamoid bone appearance showed high correlation with advanced ossification of hamular process(r=0.86). Timing of epiphyseal capping among different parts showed high correlation(r=0.80-0.90). 5. The shape of middle phalanx of the fifth finger showed the highest variability ($20.6\%$).