• 제목/요약/키워드: Rayleigh atmosphere

검색결과 11건 처리시간 0.027초

The Influence of the Initial Spot Size of a Double Half-Gaussian Hollow Beam on Its Propagation Characteristics in a the Turbulent Atmosphere

  • Yuan, Dong;Shu-Tao, Li;Jia-Yin, Guan;Xi-He, Zhang;Guang-Yong, Jin
    • Journal of the Optical Society of Korea
    • /
    • 제20권5호
    • /
    • pp.541-546
    • /
    • 2016
  • In this paper, by using the Rayleigh-Sommer field theory and the cross-spectral density function, the analytical expression for the intensity distribution of a double half-Gaussian hollow beam in a turbulent atmosphere is obtained. The influence of the initial spot size of this beam on its propagation properties in a turbulent atmosphere is simulated, and the intensity distributions for such beams with different spot sizes are obtained. The results show that the initial spot size has an important influence on the propagation properties in the near field, while this influence in the far field is very weak.

An Ultra-narrow Bandwidth Filter for Daytime Wind Measurement of Direct Detection Rayleigh Lidar

  • Han, Fei;Liu, Hengjia;Sun, Dongsong;Han, Yuli;Zhou, Anran;Zhang, Nannan;Chu, Jiaqi;Zheng, Jun;Jiang, Shan;Wang, Yuanzu
    • Current Optics and Photonics
    • /
    • 제4권1호
    • /
    • pp.69-80
    • /
    • 2020
  • A Rayleigh Lidar used for wind detection works by transmitting laser pulses to the atmosphere and receiving backscattering signals from molecules. Because of the weak backscattering signals, a lidar usually uses a high sensitivity photomultiplier as detector and photon counting technology for signal collection. The capturing of returned extremely weak backscattering signals requires the lidar to work on dark background with a long time accumulation to get high signal-to-noise ratio (SNR). Because of the strong solar background during the day, the SNR of lidar during daytime is much lower than that during nighttime, the altitude and accuracy of detection are also restricted greatly. Therefore this article describes an ultra-narrow bandwidth filter (UNBF) that has been developed on 354.7 nm wavelength of laser. The UNBF is used for suppressing the strong solar background that degrades the performance of Rayleigh wind lidar during daytime. The optical structure of UNBF consists of an interference filter (IF), a low resolution Fabry-Perot interferometer (FPI) and a high resolution FPI. The parameters of each optical component of the UNBF are presented in this article. The transmission curve of the aligned UNBF is measured with a tunable laser. Contrasting the result of with-UNBF and with-IF shows that the solar background received by a Licel transient recorder decreases by 50~100 times and that the SNR with-UNBF was improved by 3 times in the altitude range (35 km to 40 km) compared to with-IF at 10:26 to 10:38 on August 29, 2018. By the SNR comparison at four different times of one day, the ratio-values are larger than 1 over the altitude range (25~50 km) in general, the results illustrate that the SNR with-UNBF is better than that with-IF for Rayleigh Lidar during daytime and they demonstrate the effective improvements of solar background restriction of UNBF.

Disk-averaged Spectra Simulation of Earth-like Exoplanets with Ray-tracing Method

  • 류동옥;김석환
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.76.2-76.2
    • /
    • 2012
  • The understanding spectral characterization of possible earth-like extra solar planets has generated wide interested in astronomy and space science. The technical central issue in observation of exoplanet is deconvolution of the temporally and disk-averaged spectra of the exoplanets. The earth model based on atmospheric radiative transfer method has been studied in recent years for solutions of characterization of earthlike exoplanet. In this study, we report on the current progress of the new method of 3D earth model as a habitable exoplanet. The computational model has 3 components 1) the sun model, 2) an integrated earth BRDF (Bi-directional Reflectance Distribution Function) model (Atmosphere, Land and Ocean) and 3) instrument model combined in ray tracing computation. The ray characteristics such as radiative power and direction are altered as they experience reflection, refraction, transmission, absorption and scattering from encountering with each all of optical surfaces. The Land BRDF characteristics are defined by the semi-empirical "parametric-kernel-method" from POLDER missions from CNES. The ocean BRDF is defined for sea-ice cap structure and for the sea water optical model, considering sun-glint scattering. The input cloud-free atmosphere model consists of 1 layers with vertical profiles of absorption and aerosol scattering combined Rayleigh scattering and its input characteristics using the NEWS product in NASA data and spectral SMARTS from NREL and 6SV from Vermote E. The trial simulation runs result in phase dependent disk-averaged spectra and light-curves of a virtual exoplanet using 3D earth model.

  • PDF

마이크로파 대역에서 $PbTiO_3$ 박막의 Dipolar Relaxation에 대한 박막 두께의 효과 (The Effects of Film Thickness on the Dipolar Relaxation of $PbTiO_3$ Thin Films in the Microwave-Frequency Range)

  • 이도영;김용조
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.142-142
    • /
    • 2003
  • The effects of film thickness on the dipolar relaxation of ferroelectric PbTiO$_3$ films were investigated in the microwave-frequency range. The dielectric constants ($\varepsilon$) and the dielectric losses (tan $\delta$) were successfully measured up to 30 ㎓ using interdigital capacitors. The PbTiO$_3$ thin films were deposited on the quartz substrate at room temperature and postannealed in oxygen atmosphere. As the film thickness increased, its grain size and tetragonality were enhanced. And the dipolar relaxation behavior began to appear in the thin films with approximately 20 nm thickness, since ferroelectric domains could not be formed hi small grains. The observed relaxation frequency (above 10 ㎓) was higher than the previous values reported in bulk ceramics. It can be correlated with the extremely small domain size of the thinfilms as shown by TEM. And, the Rayleigh constant [1] from domain wall motions was alsoinvestigated by LCR meter at 100 KHz.

  • PDF

레일리 대기에서 단파 영역에서의 복사전달모델 결과들의 상호 비교 (Intercomparison of Shortwave Radiative Transfer Models for a Rayleigh Atmosphere)

  • 유정문;정명재;이규태;김준;허창회;안명환;허영민;이주은;유혜림;정주용;신인철;최용상;김영미
    • 한국지구과학회지
    • /
    • 제28권3호
    • /
    • pp.298-310
    • /
    • 2007
  • 본 연구에서는 레일리(순수 기체) 대기 조건 하에서 국내 COMS 연구자들이 사용하는 여덟 개 단파 복사전달모델에서 산출된 네 종류 복사속(flux) 성분을 상호비교함으로써 상대 오차를 조사하였다. 이들 복사속 성분은 지표에서의 직달 일사, 하향 산란, 상향 산란, 그리고 대기 상부에서의 상향 산란이다. 또한 국내 모델의 평가를 위하여, 15개모델을 평균한 Halthore et al.(2005) 결과(예, H15)를 기준값으로 사용하였다. 동일한 태양천정각에서 모델 간의 불일치는 열대 대기에서 수증기에 기인하였고, 한대 대기에서는 오존에 기인하였다. STREAMER를 제외한 국내 7개 모델의 지상에서의 하향 직달일사값은 H15에 대하여 ${\pm}4%$내에서 일치하였다. 이러한 상대 오차는 태양천정각이 커질 때 증가하였으며, Halthore et al.(2005)에서의 ${\pm}3%$와 근접하였다. 네 종류 복사속 분석에서 SBDART 모델이 6S 모델에 비하여 전반적으로 우수하였으나, 근적외 파장역에서는 서로 비교할만하였다. 네개 기관의 연구자들이 같은 SBDART 모델에서 산출한 지표에서의 하향 직달일사값 간에도 $12.1Wm^{-2}(1.4%)$의 불일치가 존재하였다. 불일치의 원인은 부분적으로 복사속 적분에 있어서 서로 다르게 설정된 파장 분해능에도 있었다. 본 연구는 단파 영역에서 최적 모델을 선정하는 데 도움을 줄 수 있다.

CuO 세라믹스의 소결 온도 및 분위기에 따른 미세구조와 수축거동 변화 (Effect of the Sintering Temperature and Atmosphere on the Microstructural Evolution and Shrinkage Behavior of CuO Ceramics)

  • 송주현;이정아;이준형;허영우;김정주
    • 한국세라믹학회지
    • /
    • 제49권6호
    • /
    • pp.528-534
    • /
    • 2012
  • In this study, the densification behavior and microstructural evolution of CuO were examined when this material was sintered at different temperatures in $O_2$, air and Ar atmospheres. The CuO samples maintained their phases even after prolonged sintering at $900-1100^{\circ}C$ in an oxygen atmosphere. When sintering in air, the densification was faster than it was when sintering in oxygen. However, when the samples were sintered at $1100^{\circ}C$, large pores were observed in the sample due to the phase transformation from CuO to $Cu_2O$ which accompanies the generation of oxygen gas. The pore channels in the sample became narrower as the sintering time increased, eventually undergoing a Rayleigh breakup and forming discrete isolated pores. On the other hand, CuO sintering in Ar did not contribute to the densification, as all CuO samples underwent a phase transformation to $Cu_2O$ during the heating process.

GOCI를 이용한 GOCI-II 근적외 밴드 교차보정 (Cross-Calibration of GOCI-II in Near-Infrared Band with GOCI)

  • 이은경;배수정;안재현;이경상
    • 대한원격탐사학회지
    • /
    • 제39권6_2호
    • /
    • pp.1553-1563
    • /
    • 2023
  • 천리안 해양관측위성 2호기(Geostationary Ocean Color Imager-II, GOCI-II)는 한반도 주변을 포함한 동북아 해역과 전구 영역을 관측하는 해색 위성으로 지난 10년간 운용된 GOCI의 임무를 이어받아 2020년부터 현재까지 운용되고 있다. 본 연구에서는 해색 데이터 산출에 있어 필수 과정인 대기보정 알고리즘을 개선하기 위해 GOCI 영상을 이용한 GOCI-II 근적외 파장(near-infrared, NIR) 밴드의 대리교정을 수행하였다. 이를 위해 NIR 밴드의 대기상층(top-of-atmosphere, TOA) radiance에 대한 교차보정 연구를 수행하였으며, 그 결과로 대리교정 상수를 도출하였다. 본 연구에서 도출된 대리교정 상수를 이용하여 보정한 결과 두 센서의 offset이 감소하였으며, ratio는 745 nm, 865 nm에 대해 각 1.02, 1.04에서 1.0, 0.99로 개선되었다. 이는 두 센서의 일관성이 높아진 것으로 판단된다. 또한, 대기 분자 산란 보정 반사도(Rayleigh-corrected reflectance, 𝜌rc)는 각각 5.62, 9.52% 증가하였다. 이로 인해 745 nm와 865 nm 𝜌rc의 비율의 차이가 발생했으며, 이는 대기보정 알고리즘 내 에어로졸 광 산란 보정 과정을 통해 모든 밴드의 대기보정 결과에 영향을 줄 수 있다. GOCI, GOCI-II 두 위성의 중복되는 운용 기간이 짧아 2021년 3월의 자료만을 사용하였으나, 향후 타위성과의 지속적인 교차보정 연구를 통해 개선이 가능할 것으로 사료된다. 또한 본 연구에서 도출된 NIR 밴드의 대리교정 상수를 적용하여 가시 채널의 대리교정을 수행하고, 해색 산출물의 정확도에 미치는 영향을 분석할 필요가 있다.

수중 광학측정을 이용한 Landsat TM 밴드비율 알고리듬 검증 (The Validation of Landsat TM Band Ratio Algorithm using In-water Optical Measurement)

  • 정종철
    • 한국지리정보학회지
    • /
    • 제4권1호
    • /
    • pp.18-26
    • /
    • 2001
  • 본 연구에서는 Landsat TM을 이용하여 연안해역의 수질을 모니터링하기 위해 현장에서 조사된 수중광학 측정자료를 Landsat TM 밴드에 적용하여 Landsat TM 밴드비율 알고리듬을 구성하였다. 수중광학 측정장치인 PRR(profiling reflectance radiometer)을 이용하여 획득된 수중 광 반사도를 Landsat TM 밴드 폭으로 보정한 후 현장에서 실측된 피그먼트와 통계적으로 분석하여 관계식을 도출하였다. 수중 광 반사도를 TM 밴드 1과 밴드 2 의 비율에 의한 알고리듬으로 구성하여 $Y=3.8352{\times}(R(band\;1)/R(band\;2))^{-2.1978}$ ($R^2$=0.7069)과 같은 관계식을 도출하였고, 밴드 1과 밴드 3의 비율에 의한 반사도와 피그먼트의 관계는 $Y=23.288{\times}(R(band\;1)/R(band\;3))^{-1.5243}$ ($R^2$=0.8062) 이다. 수면 위로 올라오는 광량과 TM의 레이디언스 값을 각각 구하여 대기효과 중의 Rayleigh 산란과 Mie 산란에 의한 대기중의 잡음비율을 파악하였으며, 연안해역의 조사지점에서 80% 이상의 대기잡음이 있음을 제시하였다. 본 연구에서 도출된 수중 광 알고리듬을 Landsat TM에서 수신된 영상신호에 적용하여 시화호와 연안해역의 수질을 정량적으로 분석하기 위해서는 수중 구성 성분들의 수중 광학 특성을 고려한 수중 알고리듬의 보정과 대기중의 잡음을 효율적으로 제거할 수 있는 대기보정기법의 적용이 요구된다.

  • PDF

Aerosol Optical Thickness Retrieval Using a Small Satellite

  • Wong, Man Sing;Lee, Kwon-Ho;Nichol, Janet;Kim, Young J.
    • 대한원격탐사학회지
    • /
    • 제26권6호
    • /
    • pp.605-615
    • /
    • 2010
  • This study demonstrates the feasibility of small satellite, namely PROBA platform with the compact high resolution imaging spectrometer (CHRIS), for aerosol retrieval in Hong Kong. The rationale of our technique is to estimate the aerosol reflectances by decomposing the Top of Atmosphere (TOA) reflectances from surface reflectance and Rayleigh path reflectances. For the determination of surface reflectances, the modified Minimum Reflectance Technique (MRT) is used on three winter ortho-rectified CHRIS images: Dec-18-2005, Feb-07-2006, Nov-09-2006. For validation purpose, MRT image was compared with ground based multispectral radiometer measurements and atmospherically corrected Landsat image. Results show good agreements between CHRIS-derived surface reflectance and both by ground measurement data as well as by Landsat image (r>0.84). The Root-Mean-Square Errors (RMSE) at 485, 551 and 660nm are 0.99%, 1.19%, and 1.53%, respectively. For aerosol retrieval, Look Up Tables (LUT) which are aerosol reflectances as a function of various AOT values were calculated by SBDART code with AERONET inversion products. The CHRIS derived Aerosol Optical Thickness (AOT) images were then validated with AERONET sunphotometer measurements and the differences are 0.05~0.11 (error=10~18%) at 440nm wavelength. The errors are relatively small compared to those from the operational moderate resolution imaging spectroradiometer (MODIS) Deep Blue algorithm (within 30%) and MODIS ocean algorithm (within 20%).

GEMS 위성관측에 기반한 지면반사도 산출 시에 오차 유발 변수에 대한 민감도 실험 (Sensitivity Experiment of Surface Reflectance to Error-inducing Variables Based on the GEMS Satellite Observations)

  • 신희우;유정문
    • 한국지구과학회지
    • /
    • 제39권1호
    • /
    • pp.53-66
    • /
    • 2018
  • 지면반사도 정보는 열평형 및 환경/기후 모니터링에 중요하다. 본 연구에서는 정지궤도위성의 Geostationary Environment Monitoring Spectrometer (GEMS) 관측에서 300-500 nm 파장 영역의 지면반사도 산출 시에 오차 유발 요소에 대한 민감도를 조사하였다. 장차 GEMS 지면반사도 산출 시에 오차 분석을 위하여 극궤도 위성의 MODerate resolution Imaging Spectroradiometer (MODIS; 공간 해상도 $1km{\times}1km$) 자료 및 Ozone Mapping Instrument (OMI; $12km{\times}24km$) 자료 그리고 복사전달모델 수치실험도 분석에 사용하였다. 본 연구에서 오차 유발 요소는 구름, 레일리 산란, 에어로졸, 오존 그리고 지면 특성이다. GEMS 저해상도($8km{\times}7km$)에서의 구름 탐지율은 MODIS 대비 약 79%이었으나, GEMS 화소의 운량이 40% 이하에서는 상대적으로 낮았다. 이러한 경향은 구름 이외의 다른 효과(에어로졸, 지면 특성)로 인하여 주로 발생하였다. RGB 영상과 복사전달모델 계산을 기초로 조사된 레일리 산란 효과는 육지에 비하여 해양 지역에서 뚜렷하였다. 지면반사도가 0.2보다 작은 경우에 위성관측 대기상단 반사도는 에어로졸 양에 비례하였으나, 0.2보다 큰 경우에는 그 반대 경향을 보였다. 또한 에어로졸 양에 의한 지면반사도 산출 오차는 자외선 영역에서 파장에 따라 급격하게 증가하였으나, 가시광선에서는 일정하거나 다소 감소하였다. 오존 흡수는 자외선 영역(328-354 nm) 중 328 nm에서 가장 크게 나타났다. 지면반사도가 0.15인 육지 경우에 음의 오존전량 아노말리(-100 DU)로 인한 지면반사도 산출 오차는 +0.1이었다. 본 연구는 GEMS 위성관측을 이용한 지면반사도 원격탐사의 정확도를 높이는데 기여할 수 있다.