• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.397-399
• /
• 2015

Recently, cosmic voids have been recognized as a powerful cosmological probe. A number of studies have focused on the effects of the gravitational lensing by voids on the temperature (and in some cases polarization) anisotropy of the Cosmic Microwave Background (CMB) background at relatively large to medium scales, l ~ 1000. Many of these studies attempt to explain the unusually large cold spot in CMB temperature maps and dynamical evidence of dark energy via detections of late-time integrated Sachs Wolfe (ISW) effect. Here, the effects of lensing by voids on the CMB temperature anisotropy at small scales, up to l = 3000, will be investigated. This work is carried out in the light of the benefits of adding large catalogues of cosmic voids, to be identified by future large galaxy surveys such as EUCLID and LSST, to the analysis of CMB data such as those from Planck mission. Our numerical simulation utilizes two methods, namely, the small-de ectionangle approximation and full ray-tracing analysis. Using the fitted void density profiles and radius (RV ) distribution available in the literature from N-body simulations, we simulated the secondary temperature anisotropy (lensing) of CMB photons induced by voids along a line of sight from redshift 0 to 2. Each line of sight contains approximately 1000 voids of effective radius $RV_{,eff}=35h^{-1}Mpc$ with randomly distributed radial and projected positions. Both methods are used to generate temperature maps. The two methods will be compared for their accuracy and effciency in the implementation of theoretical modeling.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.218.2-218.2
• /
• 2012

In the remote sensing researches, the reflected bright source such as snow, cloud have effects on the image quality of wanted signal. Even though those signal from bright source are adjusted in corresponding pixel level with atmospheric correction algorithm or radiometric correction, those can be problem to the nearby signal as one of the stray light source. Especially, in the step and stare observational method which makes one mosaic image with several snap shots, one of target area can affect next to the other snap shot each other. Presented in this paper focused on the stray light analysis from unwanted reflected bright source for geostationary ocean color sensor. The stray light effect for total 16 slot images each other were performed according to 8 band filters. For the realistic simulation, we constructed system modeling with integrated ray tracing technique which realizes the same space time in the remote sensing observation among the Sun, the Earth, and the satellite. Computed stray light effect in the results of paper demonstrates the distinguishable radiance value at the specific time and space.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.215-215
• /
• 2021

인도네시아 수마트라 지진해일(2004년)과 동일본 대지진(2011년)으로 인해 해당지역에서 막대한 인적·물적 피해가 발생하였으며, 지진해일에 대한 사람들의 경각심은 더욱 커지게 된 계기가 되었다. 반면 우리나라는 지진이 빈번하게 발생하는 국가에 비해 상대적으로 지진해일에 대해 안전하다는 국민들의 인식이 강한 것이 사실이다. 하지만 최근 우리나라에서 크고 작은 지진이 발생(2016년 경주 지진, 2017년 포항 지진 등)함에 따라 국민들은 지진 및 지진해일 안전에 대한 경각심이 높아지고 있다. 또한 한반도 주변에서 지진은 끊임없이 발생하고 있으며, 과거 우리나라는 지진해일로 인한 인명 및 재산피해가 기록된 사례도 존재한다(Cho, 2018). 본 연구에서는 원자력 발전소에서 지진해일에 대한 위험성에 대비하기 위해 지진해일 수치모형 실험을 통해 계산된 지진해일고 결과값에 대해 적절한 확률분포 모형을 개발한 후 각 지진해일 시나리오의 연초과 확률을 분석함으로써, 확률론적 지진해일 재해도 분석(PTHA : Probabilistic Tsunami Hazard Analysis)을 실시하는 것이다. 최종적으로는 연구대상지역의 지진해일 안전성 평가에 기여할 수 있는 검증된 자료를 제공한다. PTHA 분석은 미국(Park and Cox, 2016), 인도네시아(Horspool et al., 2014), 남유럽(Lorito et al., 2014), 일본(Japan Society of Civil Engineers, 2016) 등에서 연구가 활발하게 이루어졌으며 현재도 활발한 연구가 진행되고 있다. 본 논문에서는 먼저, 역사 지진해일 및 우리나라 근해에서 발생가능한 지진원(단층매개변수) 조사, 그리고 지진해일 수치모형실험 case 선정을 위한 파향선추적모형(wave ray-tracing) 수행, 마지막으로 지진해일고의 불확실성을 고려하기 위한 로직트리(Logic-Tree)기법 적용 시 사용하게 될 지진해일 단층매개변수 선정을 위한 지진해일 수치모형 실험 등을 수행한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.217-217
• /
• 2021

우리나라 동해 연안에 영향을 미쳤던 역사지진들과 일본에서 진행된 동해에서의 대규모지진에 관한 조사검토회에서 2014년에 보고된 동해 동연부와 남해 남연부 측에 있는 60개의 지진공백역들에 대한 단층매개변수들이 공개되어있어 수치실험을 통해 지진해일의 재해도를 분석하고 있다. 하지만 이러한 단층매개변수 값들에 대한 불확실성이 존재하기에 이를 대비한 지진해일 대책을 세울 필요가 있다. 단층매개변수의 불확실성을 고려하는 방법 중 한 가지는 해당 변수들을 조정하여 Case 모델들을 다양화하는 것이다. 이 때 매개변수의 변동에 대한 기준이 필요하기에 단층매개변수에 대한 민감도 분석이 진행되어야 한다. 본 연구의 최종목표는 지진해일에 대한 위험성에 대비하기 위해 선정된 연구지역에 대하여 단층매개변수들을 조정한 경우별 모델들을 사용한 수치모형 실험을 실행한 후 도출된 지진해일 처오름높이 및 처내림높이 결과를 분석하여 각 단층매개 변수의 지진해일에 대한 민감도를 결정하는 것이며, 최종적으로 확률론적 지진해일 재해도분석(Probabilistic Tsunami Hazard Analysys : PTHA)을 실시할 때 기준이 되는 로직트리를 작성할 때 명확한 근거를 제시한다. 단층매개변수의 민감도 분석은 일본(Goda et al., 2014), 미국(Sepúlveda and Liu, 2016), 뉴질랜드(D. Burbridge et al., 2015) 등에서 연구가 활발하게 이루어졌으며 현재도 활발한 연구가 진행되고 있다. 민감도 분석 과정은 먼저 역사 지진해일과 우리나라 근해에 영향을 미칠 수 있는 지진해일의 단층매개변수 조사한 후 파향선추적모형(wave ray-tracing)의 결과를 정리하여 대상 지역에 영향을 미치는 단층을 선정하고, 선정한 단층들의 단층매개변수 값을 일정한 기준을 두고 조정하여 실시한 지진해일 수치모형 실험에서 계산한 결과값을 분석하여 민감도를 결정한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.868-882
• /
• 2009

In this paper, channel model and wireless link performance analysis for the short-range wireless communication system applications in the terahertz frequency which is currently interested in many countries will be described. In order to realize high data rates above 10 Gbps, the more wide bandwidths will be required than the currently available bandwidths of millimeter-wave frequencies, therefore, the carrier frequencies will be pushed to THz range to obtain larger bandwidths. From the THz atmospheric propagation characteristics based on ITU-R P.676-7, the available bandwidths were calculated to be 68, 48 and 45 GHz at the center frequencies of 220, 300 and 350 GHz, respectively. With these larger bandwidths, it was shown from the simulation that higher data rate above 10 Gbps can be achieved using lower order modulation schemes which have spectral efficiency of below 1. The indoor propagation delay spread characteristics were analyzed using a simplified PDP model with respect to building materials. The RMS delay spread was calculated to be 9.23 ns in a room size of $6\;m(L){\times}5\;m(W){\times}2.5\;m(H)$ for the concrete plaster with TE polarization, which is a similar result of below 10 ns from the Ray-Tracing simulation in the reference paper. The indoor wireless link performance analysis results showed that receiver sensitivity was $-56{\sim}-46\;dBm$ over bandwidth of $5{\sim}50\;GHz$ and antenna gain was calculated to be $26.6{\sim}31.6\;dBi$ at link distance of 10m under the BPSK modulation scheme. The maximum achievable data rates were estimated to be 30, 16 and 12 Gbps at the carrier frequencies of 220, 300 and 350 GHz, respectively, under the A WGN and LOS conditions, where it was assumed that the output power of the transmitter is -15 dBm and link distance of 1 m with BER of $10^{-12}$. If the output power of transmitter is increased, the more higher data rate can be achieved than the above results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4698-4716
• /
• 2017

Wireless signal transmission is influenced by environmental effects. These effects have also been challenging for Vehicular Ad hoc Network (VANET) in real-time communication. More specifically, in an urban environment, with high mobility among vehicles, a vehicle's status from the transmitter can instantly trigger from line of sight to non-line of sight, which may cause loss of real-time communication. In order to overcome this, a deterministic signal propagation model is required, which has less complexity and more feasibility of implementation. Hence, we propose a realistic path loss model which adopts ray tracing technique for VANET in a grid urban environment with less computational complexity. To evaluate the model, it is applied to a vehicular simulation scenario. The results obtained are compared with different path loss models in the same scenario based on path loss value and application layer performance analysis. The proposed path loss model provides higher loss value in dB compared to other models. Nevertheless, the performance of vehicle-vehicle communication, which is evaluated by the packet delivery ratio with different vehicle transmitter density verifies improvement in real-time vehicle-vehicle communication. In conclusion, we present a realistic path loss model that improves vehicle-vehicle wireless real-time communication in the grid urban environment.

• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.7-14
• /
• 2007

A new horizontal neutron reflectometer has been designed and now under construction at the HANARO, 30 MW research reactor, in Daejon, Korea. We performed simulations of neutron ray-tracing to evaluate the performance of all of the optical components of the instrument with a Monte Carlo technique using McStas. The feasible wavelength of the incident neutron beam is $2.5{\AA}$. It produces a q-range up to $0.126{\AA}^{-1}$ with a supermirror as a deflector. Our studies showed improvement of the performance of the guide tube and monochromators. Although the performance is limited in q-range, it promises to be the first reflectometer in Korea for the study of free surfaces, which is currently in demand.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1212-1223
• /
• 2006

Microwave(M/W) bands, though having great demand in wireless services, have been used mostly for long distance communications. As a result, the studies on their mobile radio models have been made less than on VHF/UHF. However, as the mobile communication services with M/W bands have been increasing, the development of a more accurate prediction model of the mobile radio environments has been demanded. The development of a reliable radio prediction model in the mobile radio environments requires the measurement and analysis of the characteristics of the radio waves according to reflection, diffraction and scattering of radio signals in various mobile radio environments. The proposed 8 GHz band radio prediction models have 2 different categories: (1) LOS model and (2) non-LOS model. The LOS model predicts signal strength using the analytic result with measured pathless exponents for the waves direct and reflected by ground and buildings, and the non-LOS model suggests a prediction model of received power by calculating the signal variations after diffraction.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.73-86
• /
• 1995

The transducer section of the forward-looking ultrasound imaging catheter (FLUIC) consists of a circular piezoelectric element as a vibrator and a conical acoustic mirror as a perfect reflector. A small diameter piezoelectric transducer element is mounted on the side of a catheter's rotating shaft. The unique design of FLUIC provides the capability to form a two-dimensional image of a cross-section of vessel in front of the catheter, which is lacking in the present generation of intravascular ultrasound (IVUS) transducers, as well as a conventional side view image. The mirror configuration for the transducer section of the FLUIC is designed using an approximated ray tracing techniques. The diffraction transfer function approach [1] developed for the field prediction from primary sources is generalized and extended to predict the secondary diffraction characterstics from an acoustic mirror. The extended model is verified by simulation and experiment through a simple plane reflector and employed to analyzed the field characteristics of a FLUIC.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.19-23
• /
• 2007

We derived analytically the generalized curvature linear equation useful in the initial optical design of a two-mirror system with finite object distance, including an infinite object distance from paraxial ray tracing and Seidel third order aberration theory for coma coefficient. These aberration coefficients for finite object distance were described by the curvature, the inter-mirror distance, and the effective focal length. The analytical equations were solved by using a computer with a numerical analysis method. Two useful linear relationships, determined by the generalized curvature linear equations relating the curvatures of the two mirrors, for the cancellation of each aberration were shown in the numerical solutions satisfying the nearly zero condition ($<10^{-10}$) for each aberration coefficient. These equations can be utilized easily and efficiently at the step of initial optical design of a two-mirror system with finite object distance.