• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.454-460
• /
• 2007

In this paper, we implemented a ray-tracing simulator with a ray-launching technique and generated the propagation path of each ray in an multiple-wall indoor environment. In this simulator, we adopted two dimension ray-tracing techniques considering the reflection and penetration were dominant propagation factor in the indoor channel. From the result, we verified that this ray-tracing simulator shows the similar pattern and delay distribution with the experiment results of the previous research.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.636-642
• /
• 1999

The synthesis of the 3D images is the most important part of the virtual reality. The ray tracing is the best method for reality in the 3D graphics. But the ray tracing requires long computation time for the synthesis of the 3D images. So, we implement the ray tracing with software and hardware. Specially we design the hit-test unit with FPGA tool for the ray tracing. Hit-test unit is a very important part of ray tracing to improve the speed. In this paper, we proposed a new hit-test algorithm and apply the parallel architecture for hit-test unit to improve the speed. We optimized the arithmetic unit because the critical path of hit-test unit is in the multiplication part. We used the booth algorithm and the baugh-wooley algorithm to reduce the partial product and adapted the CSA and CLA to improve the efficiency of the partial product addition. Our new Ray tracing processor can produce the image about 512ms/F and can be adapted to real-time application with only 10 parallel processors.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.679-685
• /
• 2002

Low-frequency mono-static reverberation model for shallow-water environment is presented. It is necessary to develop the transmission loss model to calculate the sub-bottom interaction because the ray-based transmission loss model is difficult to compute the pressure accurately which penetrates the bottom medium. In this paper reverberation level is calculated using the RAM (Range dependent Acoustic Model) to augment the multi-path expansion model because it does not estimate transmission loss accurately in shallow water. The signals generated by the L-HYREV and the GSM are compared with the observed signals and it is showed that the L-HYREV model provides a closer fit to the observed signals than those obtained using the GSM.

• Journal of Convergence Society for SMB
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2014

In this study, we present the investigation results using a 3D radio wave propagation simulator in indoor environments. Previous studies treat only the path loss between the transmitter and receiver in 2D geometry. We provide the simulation results of indoor propagation prediction based on various ITU-R Recommendations. Simulation results compared here indicate that 150MHz and 2GHz frequency bands give quite different characteristics in presented indoor geometry. Since the field intensity is affected by the loss at the wall, the transmitting power level is one of the key factor for receiving power.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.374-381
• /
• 2019

This study examined a method for designing the optical cavity of a non-dispersive infrared gas detector. The infrared gas detector requires an optical cavity design to lengthen the ray path. However, the optical cavity with multiple reflecting surfaces has off-axis aberration due to the characteristics of the reflecting optical system. The rays were parallelized by using the off-axis parabolic mirror to easily increase the ray path and eliminate off-axis aberration so that the rays are admitted to the effective area of the infrared detector uniformly. A prototype of an infrared gas detector was produced with the designed optical cavity to confirm the performance.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.30-36
• /
• 2001

Whereas it is well known that microwave propagation around corners of urban area is estimated well by the uniform geometrical theory of diffraction (UTD), it is not clear how much depolarization occurs at a given receiver position and how much transmission through walls affects to total path loss. This paper presents the results of the ray tracing simulation to answer these questions. Simulations of microwave propagation around corners were performed for various line-of-sight (LOS) and out-of-sight(OOS) positions of a receiver, by summing the electrical fields of reflected, diffracted and transmitted rays coherently. Since height difference between transmitter and receiver, as well as ground plane, causes depolarization, the ray tracing simulation estimates the cross-polarization coupling. It was found that the cross-polarization coupling decreases as receiver moves away from transmitter. Another part of the study focused on the signal transmitted through building walls of the corner. It was found that the transmitted field is dominant at OOS region when the conductivity of the walls is low (for example, lower than 0.0l S/m). The simulation results of the ray tracing technique in this study agreed well with an experimental measurement around corners.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.138-142
• /
• 2007

Optical microscope was used to observe the difference of safranine penetration in Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi grown in Korea. It was found that Pinus koraiensis contained the highest number of ray parenchyma and ray tracheids. In longitudinal direction, latewood penetration was found higher than that of earlywood. The number of resin canals was found highest in Pinus koraiensis and lowest in Pinus rigida. The resin canal conducted safranine higher than longitudinal tracheids. In longitudinal direction, safranine diffused from longitudinal tracheid to ray parenchyma through the cross-field pits and from the longitudinal resin canal to ray parenchyma or longitudinal tracheid. Safranine diffused from longitudinal tracheid to its neighboring tracheid through bordered pit or ray parenchyma through the cross-field pits.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.33-37
• /
• 2003

This paper presents the characteristics of large-scale fading in a tunnel environment. The Ray-Launching Method has been used to analyze the characteristics of the tunnel. For a curved tunnel, The concept of RDN (Ray Density Normalization) is introduced in order to obtain more accurate results. For our purposes, the structure of tunnel is assumed to be either a straight or curved tunnel having rectangular cross-section. A large scale fading has been presented shown in several tunnel cases.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.119.2-119.2
• /
• 2007

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.116-121
• /
• 2020

With the recent development of the 4th Industrial Revolution, efforts have been made to carry out communication in a smart factory, farm, etc. at low cost and reliably. Methods for utilizing empty frequencies using TVWS(TV White Space) have been studied which can be used locally within 30 km. However, there have not been many studies on Path-Loss model considering Korean environment. In this paper, the Path-Loss model is divided into LOS (Line Of Sight) and NLOS (None LOS). In case of LOS model, we checked the difference between Free space model, Friis model, 2-ray model and Hata model with measured data. In the case of NLOS model, we checked the difference between Lee Model, ITU-R526-3 Model with measured data. In order to overcome the difference in Korean environment, we derived a model that can be applied in LOS and NLOS and prove its usefulness through performance evaluation through simulation.