• Korean Journal of Veterinary Service
• /
• v.13 no.1
• /
• pp.27-31
• /
• 1990

This study was carried out to obtain basic data for the Improvement of microbiological quality of raw milk. Total bacterial, psychrotrophic, thermoduric and spore counts of raw milk samples taken from milk tankers in the nothern part of kyeongnam were investigated for one year from March, 1989. The result obtained were summarized as follow 1. The number of total bacteria in raw milk averaged $4.0{\times}10^6$ CFU / ml and was not affected by seasons 2. The psychrotrophic counts of raw milk averaged $1.5{\times}10^6$ CFU / ml and it was higher in winter than in summer 3. The thermoduric counts of raw milk averaged $5.8{\times}10^4$ CFU / ml and was the lowest in winter 4. The spore counts of raw milk ranging from 3-1, 880/ ml averaged 306/ ml and was the lowest in summer

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.130-138
• /
• 2003

The classical image reconstruction for stripmap-mode Synthetic Aperture Radar is the Range-Doppler algorithm. When the spotlight-mode SAR system was envisioned, Range-Doppler algorithm turned out to fail rapidly in this SAR imaging modality. Thus, what is referred to as Polar format algorithm, which is based on the Plane wave approximation, was introduced for imaging from spotlight-mode SAR raw- data. In this paper, we have studied for the raw data processing schemes in the spotlight-mode Synthetic Aperture Radar. We apply the Wavefront Reconstruction scheme that does not utilize the approximation in spotlight-mode SAR imaging modelity, and compare the performance of target imaging with the Polar format inversion scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.1-8
• /
• 2015

Wear leveling techniques have been studied to prolong the lifetime of NAND flash memory. Most of studies have used Program/Erase(P/E) cycles as wear index for wear leveling. Unfortunately, P/E cycles could not predict the real lifetime of NAND flash blocks. Therefore, these algorithms have the limited performance from prolonging the lifetime when applied to the SSD. In order to apply the real lifetime, wear leveling algorithms, which use raw Bit Error Rate(rBER) as wear index, have been studied in recent years. In this paper, we propose CrEWL(Cold data identification using raw Bit error rate in Wear Leveling), which uses rBER as wear index to apply to the real lifetime. The proposed wear leveling reduces an overhead of garbage collections by using HBSQ(Hot Block Sequence Queue) which identifies hot data. In order to reduce overhead of wear leveling, CrEWL does not perform wear leveling until rBER of the some blocks reaches a threshold value. We evaluate CrEWL in comparison with the previous studies under the traces having the different Hot/Cold rate, and the experimental results show that our wear leveling technique can reduce the overhead up to 41% and prolong the lifetime up to 72% compared with previous wear leveling techniques.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.501-504
• /
• 2000

The classical image reconstruction for stripmap SAR is the range-Doppler imaging. However, when the spotlight SAR system was envisioned, range-Bowler imaging fumed out to fail rapidly in this SAR imaging modality. What is referred to as polar format processing, which is based on the plane wave approximation, was introduced for imaging from spotlight SAR data. This paper has been studied for the raw data processing schemes in the spotlight-mode synthetic aperture radar. we apply the wavefront reconstruction scheme that does not utilize the approximation in spotlight-mode SAR imaging modelity, and compare the performance of target imaging with the polar format inversion scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1037-1044
• /
• 2020

Since radar wind profiler (RWP) provides wind field data with high time and space resolution in all weather conditions, their verification of the accuracy and quality is essential. The simultaneous wind measurement from rawinsonde is commonly used to evaluate wind vectors from RWP. In this study, the simulation algorithm which produces the spectrum and raw time series (I/Q) data from the average values of moments is presented as a step-by-step verification method for the signal processing algorithm. The possibility of the simulation algorithm was also confirmed through comparison with the raw data of LAP-3000. The Doppler power spectrum was generated by assuming the density function of the skew-normal distribution and by using the moment values as the parameter. The simulated spectrum was generated through random numbers. In addition, the coherent averaged I/Q data was generated by random phase and inverse discrete Fourier transform, and raw I/Q data was generated through the Dirichlet distribution.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.372-389
• /
• 2024

This study investigated the efficacy of ultraviolet-C (UV-C) irradiation in enhancing the quality of raw bovine milk by targeting microbial populations and lipid peroxidation, both of which are key factors in milk spoilage. We categorized the raw milk samples into three groups based on initial bacterial load: low (<3 Log 10 CFU/mL), medium (3-4 Log 10 CFU/mL), and high (>4 Log 10 CFU/mL). Using a 144 W thin-film UV-C reactor, we treated the milk with a flow rate of 3 L/min. We measured the bacterial count including standard plate count, coliform count, coagulase-negative staphylococci count, and lactic acid bacteria count and lipid peroxidation (via thiobarbituric acid reactive substances assay) pre- and post-treatment. Our results show that UV-C treatment significantly reduced bacterial counts, with the most notable reductions observed in high and medium initial load samples (>4 and 3-4 Log 10 CFU/mL, respectively). The treatment was particularly effective against coliforms, showing higher reduction efficiency compared to coagulase-negative staphylococci and lactic acid bacteria. Notably, lipid peroxidation in UV-C treated milk was significantly lower than in pasteurized or untreated milk, even after 72 hours. These findings demonstrate the potential of UV-C irradiation as a pre-treatment method for raw milk, offering substantial reduction in microbial content and prevention of lipid peroxidation, thereby enhancing milk quality.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2020

In this study, an SW for the analysis of the wind-turbine vibration characteristics was developed as an application of SaaS cloud infrastructure. A measurement system for power-performance, mechanical load, and gearbox vibration as type-test class was installed at a target MW-class wind turbine, and structural meta and raw data were then acquired into the cloud. Data processing algorithms were developed to provide cloud data to the SW. To operate the SW continuously, raw data was downloaded consistently based on the algorithms. During the SW test, an intermittent long time-delay occurred due to the communication load associated with frequent access to the cloud. To solve this, a compression service for the target raw data was developed in the cloud and more stable data processing was confirmed. Using the compression service, stable big data processing of wind turbines, including gearbox vibration analysis, is expected.

• Journal of Food Hygiene and Safety
• /
• v.12 no.4
• /
• pp.340-345
• /
• 1997

This study was undertaken to evaluate microbial risk degree of some processed foods in Korea. In this study the data on the outbreak of foodborne diseases during recent 18 years (1976-1989, 1993-1996. 8) were analyzed. The most frequently isolated pathogens were Salmonella (36.9%); followed vibrio (22.0%), Staphylococcus (15.7%) and Escherichia coli (13.3%). Outbreak rate of Staphylococcus, Vibrio, E. coli and Salmonella, was 33.0%, 23.5%, 17.5% and 17.1%, respectively. Overall risk degree of pathogens by fatality rate, outbreak rate and pathogen amount for foodborne outbreak was Clostridium, 5, Staphylococcus and Vibrio, 4, Salmonella and E. coli, 3. Based on foodborne pathogens, the risk degree of raw seafoods, raw eggs and processed seafoods were 4, and those of raw meats, Doshiraks and milk products were 3. Also, based on processing characteristics of foods, the risk degree of surimi-based imitation crab was 3. Foods of the highest actual risk degree were raw seafoods and raw eggs (16); followed raw meats (15), surimi-based imitation crab (12), Doshirak (9) and milk products (6).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1341-1349
• /
• 2011

This research is focused on an analysis on the structure of RAW image file and the development of a RAW image file viewer for an embedded device. Recently, several RAW image file formats are being used for saving and displaying the images created by various DSLR cameras, and the necessity of handing RAW images in mobile multimedia devices is increasing. For the development of RAW image decoding/encoding library applicable to WinCE-based embedded devices viewer, an analysis of RAW image file formats, such as CRW, CR2, PEF, NEF, MRW, have been performed because their formats are not released in public. By using the library, the analysis software which can extract RAW image data, 2~3 JPEG image files and other informations such as the specification of a camera and various photographic parameters from RAW image files, were developped and a RAW image file viewer which can run in WinCE-based embedded devices. The experimental result has shown that the viewer could encode and decode RAW image files successfully and it took approximately 10secs to load them to the screen in S3C6410 based embedded platform. The outcomes of this research cloud be a good information and solution to multimedia application developers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.575-583
• /
• 2009

Various algorithms and methods, related to preprocessing of LiDAR data, are being developed and proposed. These methods are two ways, one of them is to use the regular form such as DSM or the image converted from raw LiDAR data, and the other is to use raw LiDAR data directly. The image processing method is one of representative method for the regular grid form data. This method is easy to apply to a numerical analysis technique and has an advantage of modeling and noise elimination through smoothing, but it lose the information during the data conversion. This study apply the image processing method to the irregular raw LiDAR data directly for the extracting ground information with minimized information loss and evaluate the extracting accuracy of ground information.