• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.312-316
• /
• 1995

Flat-plate buildings are commonly modeled as two-dimensional frames to calculate lateral drift, unbalanced moments, and shear at slab-column connections. For gravity loads. the slab-column frames are analyzed using equivalent column approach, while equivalent beam approach is typical for lateral loads. The equivalent beam approach is convenient for computer analysis, but no rational procedure exists for determining the effective width of foor slabs. At present, the determination of the equivalent slab width and its stiffness is a matter of engineering judgement. To account for cracking, overly conservative assumptions are made regarding the stiffness of the slab. A rational approach is therefore needed to realistically estimate the equivalent slab width and its stiffness for unbalanced moment and lateral drift calculations. Based on the test results of 8 interior slab-column connections, an equivalent beam model is proposed in which columns are modeled conventionally as a function of column and slab aspect ratios and the magnitude of the gravity load. the proposed approach is verified with selected experimental results and is founded to be practical and convenient for analyzing flat-plate buildings subjected to gravity and lateral loading.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1187-1192
• /
• 2005

Approximately 25% of military establishments became superannuated to unable perform their function, and it influences on the environment by construction wastes and the waste of national budget, as there is no rational and objective standard even though old facilities have been replaced through modernization project. Therefore, it has been searched to introduce industrial building system that can cope with the new building-construction and transference for the improvement of existing military establishments. However, as there is no economical estimation standard for practical use, industrial building-construction is still remaining at the initial stage, and the study is insufficient too. So. in this study, I would like to develope LCC cost model for rational LCC comparative analysis between industrial construction system (Modular) and existing reinforced concrete structure and cage, and to evaluate economical efficiency through case analysis.

• 유통과학연구
• /
• 제11권5호
• /
• pp.63-76
• /
• 2013

Purpose - For the past several decades, behavioral economics or behavioral decision theory has undergone rapid development. This study provides a critical review of the development of behavioral economics with a focus on what are deemed to be core theories in the field. Starting from the utility function proposed by Daniel Bernoulli in the 18th century, the development history of utility functions until the emergence of the prospect theory is thoroughly reviewed. Some of the experimental results violating the traditionally assumed utility function and supporting the prospect theory value function are summarized. The most representative principles of rational choice are transitivity, independence from irrelevant alternatives (IIA), and regularity. The development of behavioral economics has been triggered by finding counter-examples to these principles. Some of the choice behaviors discussed in this study as counter-examples to the traditional theories of rational choice are the St. Petersburg paradox; the Allais paradox; gambling behavior; and the various context effects including the similarity effect, attraction effect, and the compromise effect. The Elimination-by-Aspects (EBA) model, which was proposed as an explanation for the similarity effect, is discussed in detail as well. Based on the literature review and further analysis, this study summarizes the relationship between the context effects, prospect theory, and EBA model. Research design, data, and methodology - This study provides an extensive literature review on several important theories in the field of behavioral decision theory and adds some critical comments to the theories and the relationships among them. This study first reviews the development of utility functions. Daniel Bernoulli introduced the concept of utility function to solve the St. Petersburg paradox. In the mid-20th century, Herbert Simon proposed the "satisficing" heuristic and presented a value function with a shape different from traditional utility functions. This study highlights the strengths and weaknesses of several utility functions proposed until the emergence of the prospect theory value function. Results - This study posits that prospect theory and EBA model are the two most important theories in the field of behavioral decision theory. They can explain various choice behaviors that traditional utility maximization analysis has been unable to. The application of these models to various fields is further increasing nowadays. This study explains how prospect theory and the EBA model can be used to explain the context effects. Conclusions - The traditional economic theory relies on a single variable called "utility" in explaining consumer choice. However, this study argues that, in investigating consumer choice, several other variables should also be considered. These are the similarity among alternatives, an alternative's prototypicality within the category, the dominance relationship between alternatives, and the reference point in evaluating alternatives. Due to the development of behavioral economics, we are now closer to a more complete understanding of consumer choice behavior than in the past when we had only a single tool called utility.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1144-1153
• /
• 2015

The resonant mechanism of reradiation interference (RRI) over 1.7MHz from power transmission lines cannot be obtained from IEEE standards, which are based on researches of field intensity. Hence, the resonance is ignored in National Standards of protecting distance between UHV power lines and radio stations in China, which would result in an excessive redundancy of protecting distance. Therefore, based on the generalized resonance theory, we proposed the idea of applying model-based parameter estimation (MBPE) to estimate the generalized resonance frequency of electrically large scattering objects. We also deduced equation expressions of the generalized resonance frequency and its quality factor Q in a lossy open electromagnetic system, i.e. an antenna-transmission line system in this paper. Taking the frequency band studied by IEEE and the frequency band over 1.7 MHz as object, we established three models of the RRI from transmission lines, namely the simplified line model, the tower line model considering cross arms and the line-surface mixed model. With the models, we calculated the scattering field of sampling points with equal intervals using method of moments, and then inferred expressions of Padé rational function. After calculating the zero-pole points of the Padé rational function, we eventually got the estimation of the RRI’s generalized resonant frequency. Our case studies indicate that the proposed estimation method is effective for predicting the generalized resonant frequency of RRI in medium frequency (MF, 0.3~3 MHz) band over 1.7 MHz, which expands the frequency band studied by IEEE.

• 한국전자파학회논문지
• /
• 제23권1호
• /
• pp.108-114
• /
• 2012

본 논문에서는 인체의 전자파 해석을 위해 유한 차분 시간 영역법(FDTD: Finite-Difference Time-Domain)에 적합한 분산 모델링을 제안한다. 주파수에 따라 전기적 특성이 변하는 인체의 분산 특성을 정확하고 효율적으로 모델링을 하기 위해 상대 유전율을 2차 복소수 분수 함수식(QCRF: Quadratic Complex Rational Function)으로 표현하였다. WLSM(Weight Least Square Method) 기반의 복소수 커브 피팅법을 적용하여 인체 조직에 대한 QCRF 계수들을 추출하였으며, QCRF 분산 모델을 FDTD에 적용하는 방법을 논의하였다. 본 논문에서 제안한 QCRF 기반의 인체 분산 모델이 Gabriel의 측정 데이터와 일치하며, FDTD 적용시 Cole-Cole 분산 모델보다 계산 효율이 뛰어남을 확인하였다. 단일 주파수와 광대역 주파수 신호를 입력원으로 한 모의 실험을 통하여 QCRF 기반의 FDTD 분산 알고리즘의 검증 및 분석을 마무리하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.518-523
• /
• 2002

Nowadays the Rational Function Model (RFM), an abstract sensor model, is substituting physical sensor models for highly complicated imaging geometry. But RFM is algorithm to be required many Ground Control Points (GCP). In case of RFM of the third order, At least forty GCP are required far RFM generation. The purpose of this study is to research more efficient algorithm on GCP and accurate algorithm similar to RFM. The Polynomial Camera Model is relatively accurate and requires a little GCP in comparisons of RFM. This paper introduces how to generate Polynomial Camera Model and fundamental algorithms for construction of 3-D topographic data using the Polynomial Camera Model information in the Kompsat stereo pair and describes how to generate the 3-D ground coordinates by manual matching. Finally we tried to extract height information for the whole image area with the stereo matching technique based on the correlation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.855-860
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wave and incident wave, causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function in the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model. The incident wave, the reflected wave and the impulse response function of causality are recalculated from the minimum phase reflection coefficient for further applications.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.269-274
• /
• 2004

Recent adoption of the generalized sensor model to IKONOS and Quickbird satellite imagery have promoted various research activities concerning alternative sensor models which can replace conventional physical sensor models. For example, there are the Rational Function Model(RFM), the Direct Linear Transform(DLT) and the polynomial transform. In this paper, the DLT model which uses just a few number of GCPs was suggested. To evaluate the accuracy of the proposed DLT model, the RFM using 35 GCPs and the bias compensation method(Fraser et al., 2003) were compared with it. Quantitative evaluation of 3B positioning results were performed with independent check points and the digital elevation models(DEMs). In result, a 1.9- to 2.2-m positioning accuracy was achieved for modeling and DEM accuracy is similar to the accuracy of the other model methods.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1201-1208
• /
• 2009

A making a decision of construction cost has important meaning and function for both contractor and owner in construction projects. Especially, it should be premised that estimating the construction cost in efficient and rational way in public construction, which is invested by government funds, for efficient execution of the budget and investment as a side of government. The systematic methodology for estimating construction cost approximately of a river facility construction project has not yet been established because of its unique characteristics including its relatively small project size in terms of cost. On this study, It collect and analyze a river facility construction historical cost data for develop an approximate cost estimating model for river applied by typical embankment section method and rate application of the others activity type. And it verify suitability of model through a that result of application of real river facility construction statement at developed model. By this study, it is expected to reasonable and systematic estimating construction cost through application of developed model.

• 한국항해항만학회지
• /
• 제36권10호
• /
• pp.787-793
• /
• 2012

최적화기법과 선형변환 자동화기법을 도입하여 고속 중형 Ro-Pax선박의 조파저항성능을 향상시킬 수 있는 선형설계방법에 대하여 연구하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 적용하였으며, 선형변환 자동화기법으로는 NURBS(Non-Uniform Rational B-Spline)기법을 적용하였다. 목적함수인 선박의 조파저항성능을 예측하기 위하여 비선형 자유수면 경계조건과 선체의 침하량을 고려한 비점성 유동 해석 기법인 패널법을 적용하였다. 기준선형에 대하여 선형최적화를 수행하였으며 그 결과로 도출된 최적선형에 대하여 모형선을 제작하여 모형시험을 수행하였다. 기준선형과 최적선형에 대한 수치해석을 수행하여 얻은 결과와 최적선형에 대한 모형시험을 수행하여 얻은 결과를 서로 비교하였다.