• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.73-80
• /
• 2009

A tidal current turbine is designed and analyzed numerically by using blade element momentum theory. The rated power has a limitation because the diameter of the tidal current turbine cannot exceed the depth of sea water. This study investigates a horizontal axis tidal-current turbine with a rated power of 500 kW. NACA-6 series laminar foil shape is used for basic airfoil along the blade span. The distributions of chord length and twist angle along the blade span are obtained from the hydrodynamic optimization procedure. Prandtl's tip loss correction and angle of attack correction considering the three-dimensional effect are applied for this study. The power coefficient curve shows maximum peak at the rated tip speed ratio of 6.0, and the maximum torque coefficient is developed at the tip speed ratio of 4. The drag coefficient reaches about 0.85 at the design tip speed ratio.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 2004

Sensor used by semiconductor process produced an MAP sensor and applied to several industry. Among those sensors divided as transducer which convert physical quantity into electrical value, piezoresistive type sensor has been studied for the properties and sensitivity of piezoresistor. In this paper, the variation of seismic mass which have been functioned as actuator moving the cantilever beam analyzed the effect on distribution of resistance change ratio and supposed the optimal shape and position of piezoresistor. The resulting are following; According to the increment of seismic mass size, the value of resistance change ratio decreased caused by improve the stiffness. Y directional piezoresistor is formed in spot of 100 m apart from cantilever edge and length of that is 800$\mu$m. To increase the sensitivity, piezoresistor is made as n-type and x-direction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.253-258
• /
• 2001

Control of drag force on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in the bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.499-505
• /
• 2017

Photoisomerizing molecules which can transform their structure by the light irradiation have great deal for the application of photo-switching devices. And azobenzene is the representive type of the photoisomerizing molecules. It can transform their trans- structures into cis- structure as the light for certain wave lengths they receive. This property shows the potential of ON/OFF switching functionalization which can be used into the nano scale photo switch. Furthermore, many studies are interested in the organic linkers that connect the azobenzene and metal electrodes. We used S, $CH_2S$, $(CH_2)_4S$ as the linker to watch the influence of linkers for electronic properties. So We suggest a photoswitching device based on the vertical junction using the first-principles calculations with density functional theory and non-equilibrium Greens function (NEGF). By analyzing the electronic structure and tunneling current caused by the structural difference of the system between cis- and trans- azobenzene, the difference in switching mechanism, ON/OFF ratio and transmission will be watched as the linker changes. And finally We will suggest which linker would be the better for the optimal device architecture which can achieve high control of the ON/OFF photocurrent ratio. This result will show the potential of azobenzene-based photoswitch and provide the critical insight in constructing the optimal device architecture.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.68-72
• /
• 1999

In an effort to construct a structure under the design principle of minimal use of materials for maximum performances, a discrete gradient structure has been introduced in laminate composite systems. Using a sequential linear programming method, the gradient structure of composites to maximize the buckling load was optimized in terms of fiber volume fraction and thickness of each layer. Theoretical optimization results were then verified with experimental ones. The buckling load of laminate composite showed maximum value with the outmost [$0^{\circ}$] layer concentrated by almost all the fibers when the ratio of length to width(aspect ratio) was less than 1.0. But when the aspect ratio was 2.0, the optimum was determined in a structure where the thickness and fiber volume fraction were well balanced in each layer. From the optimization of gradient structure, the optimal fiber volume fraction and thickness of each layer were proposed. Experimental results agreed well with the theoretical ones. Gradient structures have also shown an advantage in the weight reduction of composites compared with the conventional homogeneous structures.

• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.64-71
• /
• 2007

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

• Composites Research
• /
• 제13권2호
• /
• pp.40-50
• /
• 2000

종횡비가 다른 적층복합재료에 경사형 구조를 도입하고, 이것이 일방향으로의 하중을 받을 때의 좌굴특성을 최대화하기 위해서 복합재료의 각 층에서의 섬유부피분율과 두께를 변수로 sequential linear programming method를 이용하여 최적화 하였다. 이로부터 좌굴특성을 최대화 할 수 있는 최적구조를 제안하였다. 적층복합재료는 종횡비의 영향이 커서 종횡비가 1보다 작은 경우는 최외각층의 섬유부피분율을 최대화하는 방향으로 최적화가 이루어졌으나 종횡비가 2인 경우는 각층에서의 섬유부피분율과 두께비가 어느 정도 균형을 이루는 형태로 최적화가 이루어 졌다. 경사형 구조는 전통적인 균일구조의 복합재료에 비해서 섬유부피와 복합재료의 무게 절감에 큰 효과를 가지는 것으로 확인되었다.

• 한국병원경영학회지
• /
• 제9권2호
• /
• pp.102-127
• /
• 2004

The objective of this study is to analyze a current trend of and relating factors on profitability of the Korean Public Corporation Medical Centers(KPCMCs, hereinafter, hospitals) in Korea. There are 34 hospitals in Korea as of 2004. Among these hospitals some are red ink hospitals, others are black inks in terms of profitability. Data were collected by Korea Health Industry Development Institute(KHIDI) Statistics for Hospital Management 2000-2002 and Ministry of Health and Welfare(MOHW) financial data of public hospitals which was planned to coordinate public health care services roadmap in the long run. The samples are 32 hospitals. Profitability was measured in the aspect of profit rate with normal profit to total assets, and normal profit to gross revenues as dependent variables in respective. Independent variables were classified by general factors, i.e., location, intern/resident training, period of opening, number of beds, and managerial factors(current ratio, fixed ratio, liability to total assets, total assets turnover, personnel costs, materials cost, administrative cost), and finally factors related to patient treatment(average length of stay, bed occupancy rate, admission ratio of outpatients). The methods of analysis are correlation and multiple regression analysis. This study shows firstly, a lot of hospitals are optimal current ratio. Hospitals in upper 100% current ratio are 81.2%. And the personnel cost in total costs are high. Secondly, the trend of normal profit to gross revenues of hospitals are deteriorating gradually. And lastly, as a result of multiple regression analysis, the factors had on significant effect on normal profit to total assets are fixed ratio(+), liability to total assets(-), bed occupancy rate(+), admissions of outpatients(+), etc. And the factors had on significant effect on normal profit to gross revenues are current ration(+), fixed ratio(+), personnel cost(-), administrative expenses(-), admissions of outpatients(+), etc. In conclusion, to improve the profitability of hospitals, the efforts to reduce personnel cost and average length of stay might be needed. And also beds utilization rate need to be increased.

• 대한치과교정학회지
• /
• 제26권4호
• /
• pp.414-420
• /
• 1996

방사선 사진상에서의 계측치 자체가 이차원적인 면만을 나타낼수밖에 없어 실제 삼차원적인 구조물인 두개안면부위의 특징을 정확히 묘사하기는 어려움이 있다. 이에 따라 한 평면과 다른 평면을 연계시켜 보다 3차원적인 측면의 많은 연구가 시행되어져 왔으며, 이들 두 평면간의 상호연관성에도 관심이 모아지고 있다. 본 연구에서는 부정교합과 밀접한 영향을 가질뿐 아니라, 성장의 변화를 예측할수 있게하고 치료방법,예후 결정등에 중요한 영향을 미치는 안모유형지수와 이하두정 방사선 사진상에서의 여러 계측치간의 상호연관성을 평가하여 보았다. 골격성 ClassI의 양호한 안모를 가진 성인을 대상으로 측모두부방사선사진 이하 두정 방사선계측사진을 촬영하여 이들간의 상관관계를 알아보아 다음과 같은 결론을 얻었다. 1. 과두의 평균경사도에 영향을 주는 요소를 알아보기 위해 FACE,INT-CO-ANG, MN-CORPUS, CON-RATIO, GON-RATIO, MN-RATIO, MX-RATIO를 변수로하여 다중회귀분석 결과, 아래의 회귀 방정식을 얻었다. CON-AVE는 .173(FACE) -0.322 (INT-CO-ANG) +36.34 (GON-RATIO)+0.420(MN-CORPUS)로 나타났다($R^2=.85451$) 2. 안모유형지수에 대해선 아래의 희귀방정식을 얻었다. FACE=.050(CON-ANG)+.023(INT-CO-ANG)-.075(MN-CORPUS) ( 2. 안모유형지수에 대해선 아래의 희귀방정식을 얻었다. FACE=.050(CON-ANG)+.023(INT-CO-ANG)-.075(MN-CORPUS) ($R^2=.31547$) 3. 이하두정 방사선사진상의 계측치들중 MN-CORPUS, CON-RATIO, GON-RATIO, MN-RATIO, MX-RATIO는 서로 밀접한 상관관계를 보였다.(P<0.05) 4. 하악과두의 평균경사도는 우측에선 $23.67^{\circ}$, 좌측에선 $20.71^{\circ}$로 나타났고, 좌,우측값에서 차이를 보이고 있다. FACE : 안모 유형지수. CON-ANG : 하악과두경사도의 평균값. CON-AVE : 좌,우 하악파두경사도의 평균값. INT-CO-ANG : 좌,우 하악과두장축이 이루는 각도. MN-CORPUS : 좌,우Gonion에서 Pog.까지 이은 선에 의해 형성되는 각도. CON-RATIO: intercondylar distance/mandibular body length. GON-RATIO: intergonion distance/mandibular body length. MN-RATIO : intermylohyoid distance/mandibular body length. MX-RATIO: intermaxillary tuberosity distance/ANS-PNS distance.

• Current Research on Agriculture and Life Sciences
• /
• 제1권
• /
• pp.19-26
• /
• 1983

동할발생조건(胴割發生條件)에 대(對)한 미립(米粒)의 형태(形態)나 성분함량(成分含量)의 영향(影響)을 알고저 비료시용방법(肥料施用方法)을 달리하여 재배(裁培)한 벼의 동할립(桐割粒)과 건전립(健全粒)을 구분(區分)하여 분석(分析)해본 결과(結果) 동할발생(桐割發生)은 삼강(三剛)벼가 락동(洛東)벼보다, 만기수확구(晩期收穫區)가 적기수확구(適期收穫區)보다 많았으며 3요소외(三要素外)에 규산질비료(珪酸質肥料)를 병용함으로서 동할율(桐割率)이 감소(減少)되었다. 동할립(桐割粒)은 건전립(健全粒)에 비(比)하여 천립중(千粒重) 및 미립(米粒)의 체적(體積)(립장(粒長)${\times}$립폭(粒幅)${\times}$립후(粒厚)), 립장(粒長), 립장(粒長)/립폭(粒幅)이 컸으며 품종간(品種間)에는 미립(米粒)의 립장(粒長)/립폭비(粒幅比)가 큰 삼강(三剛)벼가 락동(洛東)벼보다 동할율(胴割率)이 높았다. 동할(胴割)이 비교적(比較的) 잘 되는 삼강(三剛)벼는 미립내(米粒內) 규산함량(珪酸含量)이 낮았고 인산함량(燐酸含量)이 높았으며 동할(胴割)이 잘 안되는 락동(洛東)벼는 그 반대(反對)이었다. 그래서 삼강(三剛)벼는 미립내(米粒內) 규인비(珪燐比)가 낮았고 락동(洛東)벼는 높았으며 비료삼요소(肥料三要素)에 규산(珪酸)을 시용(施用)함으로서 그 함량비(含量比)를 높일수 있었다.