• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.13-23
• /
• 2022

Peat soil has the characteristics of high moisture content, large void ratio and low shear strength. In this study, unconfined compressive strength and SEM tests are conducted to investigate the effects of ultrahigh moisture content, cement content, organic content and pH value on the strength of solidified peat. As an increase in the cement content and curing period, the failure mode of solidified peat soil changes from ductile failure to brittle failure. The influence of moisture content on the strength of solidified peat is greater than the cement content. As cement content increases from 10% to 30%, strength of solidified peat at a curing age of 28 days increases by 161%~485%. By increasing water content by 100%, decreases of solidified peat at a curing age of 28 days is 42%~79%. Compared with the strength of solidified peat with a pH value of 5.5, the strength of peat with a pH value of 3.5 reduces by 10% ~ 46%, while the strength of peat with a pH value of 7.0 increases by 8% ~ 38%. It is recommended to use filler materials for stabilizing peat soil with moisture content greater than 200%. Because of small size of clay particles, clay added in the cement solidified peat can improve much higher strength that that of sand.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.430-435
• /
• 2012

This study was carried out to investigate the rheological effects of black garlic extracts on the bread dough. 0, 5, 10 and 15% of black garlic extracts were added in the bread flour. Falling number, RVA (Rapid visco analyser), farinograph and alveograph were analyzed. Falling number was lowered by increasing the amount of the extract added in the wheat flour. The pasting characteristics of the dough by RVA, value of pasting temperature, peak viscosity, holding strength, final viscosity, break down and set back were increased compared to the control. In the Farinograph analysis, the consistency and the water absorption ratio were elevated with the increase of the extract added. However, the rapid decrease of stability and the time to breakdown values were observed by increasing the extract addition amount compared to the control. However the mixing tolerance index (MTI) was rapidly increased as the amount of the extract addition was increased, and the highest farinogram quality number was observed in the control. Through the alveograph analysis, $P_{max}$ value was found to show the highest value in the control, while the L and G values were higher but W values was lowered in the dough with added 15% black garlic extract. As a result of the analysis, there was no significant bad effect until 5% of black garlic extracts was added to the bread dough.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.67-70
• /
• 2006

This study investigates the properties of light weight foamed concrete designed with various incorporating ratios of CKD and adding ratios of PS. Test showed that increase of CKD and PS decreased fluidity of fresh concrete, which need more addition of superplasticizer to secure proper fluidity. As for the sinking depth of specimens, using more CKD or PS decreased the value, due to the improvement of viscosity by micro particles of CKD and reduction of air loss by PS. Those methods are very effective to solve the sinking problem of light weight foamed concrete, which has been highly concerned. For the hardened concrete, compressive strength of specimens exhibited that using around 10% of CKD or 0.02% of PS increased the strength value, but decreased when incorporated or added more amounts of that, due to reduction of the sinking depth, caused by filling effect of the micro particle and improvement of the viscosity.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.337-343
• /
• 2006

This study was conducted to develop naengmyon added with persimmon leaf powder. To find out the proper mixing ratio, physicochemical properties were investigated. There was a little difference in water binding capacity between control and naengmyon added with persimmon leaf powder. Amylogram showed that initial pasting temperature and peak point value were increased as increment of adding amount of persimmon leaf powder. After cooking, the weight of a naengmyon was increased but cooking loss and turbidity were decreased with increment of persimmon leaf powder. At a glance of color difference values, there was a distinctive boundary near at 6%. But similar at over 6% as increasing adding amount of persimon leaf powder texture characteristics such as hardness, adhesiveness, cohesiveness, springness and gumminess were declined. From overall experimental result, the proper mixing ratio of persimmon leaf powder for naengmyon was 4%.

• Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.195-200
• /
• 2005

This study optimized the mixing ratios of seafood sauce with blue crab for maximal sensory attributes using a response surface methodology with central composite design. It evaluated sensory appeal, nutritional value, and some rheological properties. The optimal formulation appeared to be 252 g of tomato paste, 78 g of chopped garlic, and 519 g of blue crab block; this ratio resulted in a predicted sensory score of 5.7 (on a 7-point scale) for overall acceptability. Addition of blue crab block increased moisture, ash, and protein contents in various sauces, but fat contents were similar in every sauce. Major free amino acids such as glutamic acid, phospho serine, asparagine, and arginine composed about $60\%$ of the total amino acid content. Standard and optimized sauces were red and light yellow, and those color values were significantly higher than in American-style sauces. Optimal viscosity was half the value of American-style sauces; more blue crab block added to the sauce resulted in lower viscosity. Adding this sauce to seafood dishes will likely aid development of flavoring substances.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.722-728
• /
• 2008

This study was to investigate the quality characteristics of Seockryu-pyun by addition of different ratio of pomegranate juice and pomegranate concentrate (100%, 80%, 60%, 40%). Moisture and the pH increased as the content of pomegranate juice and pomegranate concentrate decreased respectivley. However, DPPH radical scavenging activity was decreased when adding pomegranate juice and pomegranate concentrate was decreased. With decreasing pomegranate juice addition, both the lightness(L) and yellowness(b) was significantly (p<0.05) higher, whereas, the redness(a) was significantly (p<0.05) lower. As addition of pomegranate concentrate was decreasing that lightness, a value and b value were higher. Texture profiles of hardness, adhesiveness, cohesiveness, gumminess, chewiness of Seockryu-pyun was not greatly showed significant difference among samples. Also, springiness was not significantly (p<0.05) different in any groups. For sensory evaluation, color and sourness were decreased as pomegranate juice and pomegranate concentrate was diluted. Seockryu-pyun, PJ3 made with addition of 60% pomegranate juice was the most preferred in overall acceptability. From the results, the most advisable mixture ratio of Seockryu-pyun was found as pomegranate juice 360 g (60%), water 240 g, mungbean starch 60 g and sugar 200 g.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.3
• /
• pp.325-329
• /
• 2006

This study was to investigate the effect of the addition of red ginseng powder in Dasik. The addition of red ginseng powder in Dasik that we used with was in the ratio of 0%, 2%, 4%, 6% and 8% of red ginseng powder to Dasik in weight. Also, we used two different kinds of Dasik. One was made of starch and the other was made of flour. The physic-chemical analysis and sensory test were performed on the Dasik. The red ginseng powder added flour and starch Dasik showed lower moisture content and higher ash content compared with the non-added control group. In color analysis, whereas L value lowed at the addition of red ginseng powder, a and b value increased at the addition of red ginseng powder. In mechanical texture test, addition of red ginseng powder starch Dasik showed high hardness, cohesiveness and brittleness. Addition of red ginseng powder flour Dasik showed high springiness and gumminess. In the sensory test, the addition of the red ginseng powder reduced the sweetness and increased the surface color and the flavor. There was no difference in preference between the Dasik with up to 4% of red ginseng powder added and the control group, but the Dasik with 6% or more red ginseng was found undesirable (p<0.05). In conclusion, the Dasik with up to 4% addition of red ginseng powder would be the useful method to fulfill the traditional quality of Dasik. It was also found that the flour Dasik was to be more preferable than the starch Dasik.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.52-58
• /
• 2006

Coffee chaff for manufacturing of the 6 mm thick cement-bonded boards was obtained from a coffee processing industry at Omuo-Ekiti, in Ekiti State, Nigeria. Boards were produced with three levels of cement to coffee chaff ratio of 1.5:1, 2.5:1 and 3.5:1; and at three levels of mixing curing reagent of 2.0%, 2.5% and 3.0%. Three dimensional properties of thickness swelling (TS), water absorption (WA) and linear expansion (LE) were investigated after 48 hours immersion in water. The mean values obtained for TS, WA and LE ranged from 0.46% to 1.47%, from 11.52% to 24.00%, from 0.19% to 0.35%, respectively. The most dimensionally stable boards were produced at the highest mixing levels of curing reagent and cement to coffee chaff ratio of 3.0% and 3.5:1, respectively. The coffee chaff is suitable as raw material for the manufacture of cement-bonded composites and it would be able to stimulate and activate the use of other agro-byproducts for the manufacture of value-added panels.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.38-43
• /
• 1996

Windowing routines have as their purpose the reduction of the sidelobes of a spectral output of the FFT or DFT routines. Windowing routines accomplish this by forcing the beginning and end of any sequence to approach each other in value. Since they must work with any sequence they force the beginning and ending samples near zero. To make up for this reduction in power, windowing routines give extra weight to the values near the middle of the sequence. The difference between windows is the way in which they transition from the low weights near the edges to the higher weights neqr the middle of the sequence. Signal-to-noise ratio(SNR) can be determined by the ratio of the output noisy signal variance to the input noisy signal variance of a window. Standard deviation of noise is reduced by windowing. Thus, the windowing operation improved the SNR of the noisy signal. This paper shows a performance estimation of windowing on a single tone with added Gaussian noise and uniform noise.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.751-758
• /
• 2012

This study examined the optimum conditions for producing Jeung-pyun in a faster and efficient way by replacing Takju (traditional way) with a chemical leavening agent for fermentation using dry rice powder instead of wet rice powder. The optimum amount of leavening agent for Jeung-pyun was examined by comparing the moisture content, spring ratio, pore ratio, texture, color value, scanning electron microscopy images and appearance characteristics of Jeung-pyung (con) prepared using traditional fermentation method with those prepared with 4, 5, 6, 7, 8% of the chemical leavening agent. As a result, the 6% leavening agent-added Jeung-pyun showed closest quality results with the traditional Jeung-pyun, and was most preferred. Therefore, 6% leavening agent is the optimum amount for making Jeung-pyun.